drivers/ssd1306/ssd1306.go

// Package ssd1306 implements a driver for the SSD1306 led matrix controller, it comes in various colors and screen sizes.
//
// Datasheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
package ssd1306 // import "tinygo.org/x/drivers/ssd1306"

import (
	"errors"
	"image/color"
	"machine"
	"time"

	"tinygo.org/x/drivers"
	"tinygo.org/x/drivers/internal/legacy"
)

// Device wraps I2C or SPI connection.
type Device struct {
	bus        Buser
	buffer     []byte
	width      int16
	height     int16
	bufferSize int16
	vccState   VccMode
	canReset   bool
}

// Config is the configuration for the display
type Config struct {
	Width    int16
	Height   int16
	VccState VccMode
	Address  uint16
}

type I2CBus struct {
	wire    drivers.I2C
	Address uint16
}

type SPIBus struct {
	wire     drivers.SPI
	dcPin    machine.Pin
	resetPin machine.Pin
	csPin    machine.Pin
}

type Buser interface {
	configure() error
	tx(data []byte, isCommand bool) error
	setAddress(address uint16) error
}

type VccMode uint8

// NewI2C creates a new SSD1306 connection. The I2C wire must already be configured.
func NewI2C(bus drivers.I2C) Device {
	return Device{
		bus: &I2CBus{
			wire:    bus,
			Address: Address,
		},
	}
}

// NewSPI creates a new SSD1306 connection. The SPI wire must already be configured.
func NewSPI(bus drivers.SPI, dcPin, resetPin, csPin machine.Pin) Device {
	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
	return Device{
		bus: &SPIBus{
			wire:     bus,
			dcPin:    dcPin,
			resetPin: resetPin,
			csPin:    csPin,
		},
	}
}

// Configure initializes the display with default configuration
func (d *Device) Configure(cfg Config) {
	if cfg.Width != 0 {
		d.width = cfg.Width
	} else {
		d.width = 128
	}
	if cfg.Height != 0 {
		d.height = cfg.Height
	} else {
		d.height = 64
	}
	if cfg.Address != 0 {
		d.bus.setAddress(cfg.Address)
	}
	if cfg.VccState != 0 {
		d.vccState = cfg.VccState
	} else {
		d.vccState = SWITCHCAPVCC
	}
	d.bufferSize = d.width * d.height / 8
	d.buffer = make([]byte, d.bufferSize)
	d.canReset = cfg.Address != 0 || d.width != 128 || d.height != 64 // I2C or not 128x64

	d.bus.configure()

	time.Sleep(100 * time.Nanosecond)
	d.Command(DISPLAYOFF)
	d.Command(SETDISPLAYCLOCKDIV)
	d.Command(0x80)
	d.Command(SETMULTIPLEX)
	d.Command(uint8(d.height - 1))
	d.Command(SETDISPLAYOFFSET)
	d.Command(0x0)
	d.Command(SETSTARTLINE | 0x0)
	d.Command(CHARGEPUMP)
	if d.vccState == EXTERNALVCC {
		d.Command(0x10)
	} else {
		d.Command(0x14)
	}
	d.Command(MEMORYMODE)
	d.Command(0x00)
	d.Command(SEGREMAP | 0x1)
	d.Command(COMSCANDEC)

	if (d.width == 128 && d.height == 64) || (d.width == 64 && d.height == 48) { // 128x64 or 64x48
		d.Command(SETCOMPINS)
		d.Command(0x12)
		d.Command(SETCONTRAST)
		if d.vccState == EXTERNALVCC {
			d.Command(0x9F)
		} else {
			d.Command(0xCF)
		}
	} else if d.width == 128 && d.height == 32 { // 128x32
		d.Command(SETCOMPINS)
		d.Command(0x02)
		d.Command(SETCONTRAST)
		d.Command(0x8F)
	} else if d.width == 96 && d.height == 16 { // 96x16
		d.Command(SETCOMPINS)
		d.Command(0x2)
		d.Command(SETCONTRAST)
		if d.vccState == EXTERNALVCC {
			d.Command(0x10)
		} else {
			d.Command(0xAF)
		}
	} else {
		// fail silently, it might work
		println("there's no configuration for this display's size")
	}

	d.Command(SETPRECHARGE)
	if d.vccState == EXTERNALVCC {
		d.Command(0x22)
	} else {
		d.Command(0xF1)
	}
	d.Command(SETVCOMDETECT)
	d.Command(0x40)
	d.Command(DISPLAYALLON_RESUME)
	d.Command(NORMALDISPLAY)
	d.Command(DEACTIVATE_SCROLL)
	d.Command(DISPLAYON)
}

// ClearBuffer clears the image buffer
func (d *Device) ClearBuffer() {
	for i := int16(0); i < d.bufferSize; i++ {
		d.buffer[i] = 0
	}
}

// ClearDisplay clears the image buffer and clear the display
func (d *Device) ClearDisplay() {
	d.ClearBuffer()
	d.Display()
}

// Display sends the whole buffer to the screen
func (d *Device) Display() error {
	// Reset the screen to 0x0
	// This works fine with I2C
	// In the 128x64 (SPI) screen resetting to 0x0 after 128 times corrupt the buffer
	// Since we're printing the whole buffer, avoid resetting it in this case
	if d.canReset {
		d.Command(COLUMNADDR)
		d.Command(0)
		d.Command(uint8(d.width - 1))
		d.Command(PAGEADDR)
		d.Command(0)
		d.Command(uint8(d.height/8) - 1)
	}

	return d.Tx(d.buffer, false)
}

// SetPixel enables or disables a pixel in the buffer
// color.RGBA{0, 0, 0, 255} is consider transparent, anything else
// with enable a pixel on the screen
func (d *Device) SetPixel(x int16, y int16, c color.RGBA) {
	if x < 0 || x >= d.width || y < 0 || y >= d.height {
		return
	}
	byteIndex := x + (y/8)*d.width
	if c.R != 0 || c.G != 0 || c.B != 0 {
		d.buffer[byteIndex] |= 1 << uint8(y%8)
	} else {
		d.buffer[byteIndex] &^= 1 << uint8(y%8)
	}
}

// GetPixel returns if the specified pixel is on (true) or off (false)
func (d *Device) GetPixel(x int16, y int16) bool {
	if x < 0 || x >= d.width || y < 0 || y >= d.height {
		return false
	}
	byteIndex := x + (y/8)*d.width
	return (d.buffer[byteIndex] >> uint8(y%8) & 0x1) == 1
}

// SetBuffer changes the whole buffer at once
func (d *Device) SetBuffer(buffer []byte) error {
	if int16(len(buffer)) != d.bufferSize {
		//return ErrBuffer
		return errors.New("wrong size buffer")
	}
	for i := int16(0); i < d.bufferSize; i++ {
		d.buffer[i] = buffer[i]
	}
	return nil
}

// GetBuffer returns the whole buffer
func (d *Device) GetBuffer() []byte {
	return d.buffer
}

// Command sends a command to the display
func (d *Device) Command(command uint8) {
	d.bus.tx([]byte{command}, true)
}

// setAddress sets the address to the I2C bus
func (b *I2CBus) setAddress(address uint16) error {
	b.Address = address
	return nil
}

// setAddress does nothing, but it's required to avoid reflection
func (b *SPIBus) setAddress(address uint16) error {
	// do nothing
	println("trying to Configure an address on a SPI device")
	return nil
}

// configure does nothing, but it's required to avoid reflection
func (b *I2CBus) configure() error { return nil }

// configure configures some pins with the SPI bus
func (b *SPIBus) configure() error {
	b.csPin.Low()
	b.dcPin.Low()
	b.resetPin.Low()

	b.resetPin.High()
	time.Sleep(1 * time.Millisecond)
	b.resetPin.Low()
	time.Sleep(10 * time.Millisecond)
	b.resetPin.High()

	return nil
}

// Tx sends data to the display
func (d *Device) Tx(data []byte, isCommand bool) error {
	return d.bus.tx(data, isCommand)
}

// tx sends data to the display (I2CBus implementation)
func (b *I2CBus) tx(data []byte, isCommand bool) error {
	if isCommand {
		return legacy.WriteRegister(b.wire, uint8(b.Address), 0x00, data)
	} else {
		return legacy.WriteRegister(b.wire, uint8(b.Address), 0x40, data)
	}
}

// tx sends data to the display (SPIBus implementation)
func (b *SPIBus) tx(data []byte, isCommand bool) error {
	var err error

	if isCommand {
		b.csPin.High()
		time.Sleep(1 * time.Millisecond)
		b.dcPin.Low()
		b.csPin.Low()

		err = b.wire.Tx(data, nil)
		b.csPin.High()
	} else {
		b.csPin.High()
		time.Sleep(1 * time.Millisecond)
		b.dcPin.High()
		b.csPin.Low()

		err = b.wire.Tx(data, nil)
		b.csPin.High()
	}

	return err
}

// Size returns the current size of the display.
func (d *Device) Size() (w, h int16) {
	return d.width, d.height
}