mirror of
https://github.com/tinygo-org/drivers.git
synced 2026-08-03 06:27:47 +00:00
Joel Wetzell
62663c1832
* add SPI driver for semtech sx128x chips Co-authored-by: Copilot <copilot@github.com> * handle busy loop better * switch to time based busy timeout Co-authored-by: Copilot <copilot@github.com> * comment functions * start on using types for function inputs * use types where applicable and align with datasheet more Co-authored-by: Copilot <copilot@github.com> * work on exporting less constants * only export "actionable" errors * combine identical constants * add crude lora rx and tx examples * change from type aliases to local types --------- Co-authored-by: Copilot <copilot@github.com>
107 lines
2.7 KiB
Go
107 lines
2.7 KiB
Go
package main
|
|
|
|
import (
|
|
"errors"
|
|
"machine"
|
|
"runtime"
|
|
"time"
|
|
|
|
"tinygo.org/x/drivers/sx128x"
|
|
)
|
|
|
|
var (
|
|
// pin mapping specific to the lilygo t3s3, change as needed for your board
|
|
sdoPin = machine.GPIO6
|
|
sdiPin = machine.GPIO3
|
|
sckPin = machine.GPIO5
|
|
nssPin = machine.GPIO7
|
|
busyPin = machine.GPIO36
|
|
resetPin = machine.GPIO8
|
|
dio1Pin = machine.GPIO9
|
|
)
|
|
|
|
func setupPins() {
|
|
nssPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
|
|
nssPin.Set(true)
|
|
|
|
resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
|
|
resetPin.Set(true)
|
|
|
|
busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
|
|
dio1Pin.Configure(machine.PinConfig{Mode: machine.PinInput})
|
|
}
|
|
|
|
func main() {
|
|
setupPins()
|
|
|
|
spi := machine.SPI0
|
|
spi.Configure(machine.SPIConfig{
|
|
Mode: 0,
|
|
Frequency: 8 * 1e6,
|
|
SDO: sdoPin,
|
|
SDI: sdiPin,
|
|
SCK: sckPin,
|
|
})
|
|
|
|
radio := sx128x.New(
|
|
spi,
|
|
nssPin,
|
|
resetPin,
|
|
busyPin,
|
|
)
|
|
|
|
radio.WaitWhileBusy(time.Second)
|
|
SetupLora(radio)
|
|
|
|
for {
|
|
data, err := Rx(radio)
|
|
if err != nil {
|
|
println("failed to receive:", err)
|
|
} else {
|
|
println("received:", string(data))
|
|
}
|
|
}
|
|
}
|
|
|
|
func SetupLora(radio *sx128x.Device) {
|
|
radio.SetStandby(sx128x.STANDBY_RC)
|
|
radio.SetPacketType(sx128x.PACKET_TYPE_LORA)
|
|
radio.SetRegulatorMode(sx128x.REGULATOR_DC_DC)
|
|
|
|
radio.SetRfFrequency(2400000000) // 2.4Ghz
|
|
radio.SetModulationParamsLoRa(sx128x.LORA_SF_9, sx128x.LORA_BW_1600, sx128x.LORA_CR_4_7)
|
|
|
|
// section 14.4.1 shows required register setting for setting up LoRa operations. These depend on the chosen spreading factor.
|
|
radio.WriteRegister(0x925, []byte{0x32})
|
|
radio.WriteRegister(0x93C, []byte{0x01})
|
|
|
|
radio.SetTxParams(13, sx128x.RADIO_RAMP_02_US)
|
|
radio.SetPacketParamsLoRa(12, sx128x.LORA_HEADER_EXPLICIT, 0xFF, sx128x.LORA_CRC_DISABLE, sx128x.LORA_IQ_STD)
|
|
radio.WriteRegister(sx128x.REG_LORA_SYNC_WORD_MSB, []byte{0x14, 0x24}) // full sync word is 0x1424
|
|
|
|
}
|
|
|
|
func Rx(radio *sx128x.Device) ([]byte, error) {
|
|
radio.SetStandby(sx128x.STANDBY_RC)
|
|
radio.SetDioIrqParams(sx128x.IRQ_RX_DONE_MASK|sx128x.IRQ_RX_TX_TIMEOUT_MASK, sx128x.IRQ_RX_DONE_MASK|sx128x.IRQ_RX_TX_TIMEOUT_MASK, 0x00, 0x00)
|
|
radio.SetBufferBaseAddress(0, 0)
|
|
radio.ClearIrqStatus(sx128x.IRQ_ALL_MASK)
|
|
radio.SetRx(sx128x.PERIOD_BASE_4_MS, 250) // 4ms * 250 = 1s
|
|
// busy wait for IRQ indication
|
|
for dio1Pin.Get() == false {
|
|
runtime.Gosched()
|
|
}
|
|
irqStatus, _ := radio.GetIrqStatus()
|
|
if irqStatus&sx128x.IRQ_RX_DONE_MASK != 0 {
|
|
payloadLength, bufferOffset, err := radio.GetRxBufferStatus()
|
|
if err != nil {
|
|
return nil, err
|
|
}
|
|
data, err := radio.ReadBuffer(bufferOffset, payloadLength)
|
|
return data, nil
|
|
} else if irqStatus&sx128x.IRQ_RX_TX_TIMEOUT_MASK != 0 {
|
|
return nil, errors.New("rx timeout")
|
|
}
|
|
return nil, errors.New("unexpected IRQ status")
|
|
}
|