all: release 0.22.0

Signed-off-by: deadprogram <ron@hybridgroup.com>

CHANGELOG.md

@@ -1,3 +1,37 @@
+0.22.0
+---
+- **new devices**
+    - epd: add waveshare 2.9in (v1)
+    - makeybutton: add driver for MakeyMakey-like button
+
+- **enhancements**
+    - **rtl8720dn**
+        - add UDP close function
+        - improve error handling
+    - **net/http**
+        - improve header parsing
+        - add last-will-and-testament to MQTT
+    - **net/mqtt**
+        - adds keepalive pinging, disconnect, and graceful goroutine cleanup
+        - support for cookies when https
+        - add support for retained messsages
+
+- **bugfixes**
+    - irremote: Fix irremote reporting incorrect NEC addresses and command codes (#422)
+    - net/http:  Fix http.Get() with port specification
+
+- **build**
+    - Makefile recursively finds unit-tests
+    - switching to GHA
+
+- **updates**
+    - update tinyfont to v0.3.0
+    - update tinyfs to v0.2.0
+
+- **examples**
+    - rtl8720dn: add ./examples/rtl8720dn/version
+
+
 0.21.0
 ---
 - **new devices**

README.md

@@ -52,7 +52,7 @@ func main() {
 
 ## Currently supported devices
 
-The following 81 devices are supported.
+The following 82 devices are supported.
 
 | Device Name                                                                                                                                                                                         | Interface Type |
 |-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------|
@@ -137,6 +137,7 @@ The following 81 devices are supported.
 | [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf)                                                                                                      | I2C |
 | [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf)                                                                             | SPI |
 | [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf)                                                                                           | SPI |
+| [Waveshare 2.9" e-paper display (V1)](https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf)                                                                                           | SPI |
 | [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf)                                                                                     | SPI |
 | [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf)                                                                                                                               | GPIO |
 | [XPT2046 touch controller](http://grobotronics.com/images/datasheets/xpt2046-datasheet.pdf)                                                                                                         | GPIO |

examples/makeybutton/main.go

@@ -15,8 +15,8 @@ var (
 
 func main() {
 	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	button.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
 	key = makeybutton.NewButton(button)
+	key.Configure()
 
 	for {
 		switch key.Get() {
@@ -25,6 +25,6 @@ func main() {
 		case makeybutton.Released:
 			led.Low()
 		}
-		time.Sleep(30 * time.Millisecond)
+		time.Sleep(100 * time.Millisecond)
 	}
 }

examples/waveshare-epd/epd2in9/main.go

@@ -0,0 +1,84 @@
+package main
+
+import (
+	"machine"
+
+	"image/color"
+
+	"time"
+
+	"tinygo.org/x/drivers/waveshare-epd/epd2in9"
+)
+
+var display epd2in9.Device
+
+const (
+	width  = 128
+	height = 296
+)
+
+func main() {
+	machine.SPI0.Configure(machine.SPIConfig{
+		Frequency: 8000000,
+		Mode:      0,
+	})
+
+	display = epd2in9.New(machine.SPI0, machine.GPIO2, machine.GPIO3, machine.GPIO4, machine.GPIO5)
+	display.Configure(epd2in9.Config{
+		Width:        width,
+		LogicalWidth: width,
+		Height:       height,
+	})
+
+	black := color.RGBA{1, 1, 1, 255}
+	white := color.RGBA{0, 0, 0, 255}
+
+	display.ClearBuffer()
+	println("Clear the display")
+	display.ClearDisplay()
+	display.WaitUntilIdle()
+	println("Waiting for 2 seconds")
+	time.Sleep(2 * time.Second)
+
+	// Show a checkered board
+	for i := int16(0); i < width/8; i++ {
+		for j := int16(0); j < height/8; j++ {
+			if (i+j)%2 == 0 {
+				showRect(i*8, j*8, 8, 8, black)
+			}
+		}
+	}
+	println("Show checkered board")
+	display.Display()
+	display.WaitUntilIdle()
+	println("Waiting for 2 seconds")
+	time.Sleep(2 * time.Second)
+
+	println("Set partial lut")
+	display.SetLUT(false) // partial updates (faster, but with some ghosting)
+	println("Show smaller striped area")
+	for i := int16(40); i < 88; i++ {
+		for j := int16(83); j < 166; j++ {
+			if (i+j)%4 == 0 || (i+j)%4 == 1 {
+				display.SetPixel(i, j, black)
+			} else {
+				display.SetPixel(i, j, white)
+			}
+		}
+	}
+
+	display.Display()
+	display.WaitUntilIdle()
+
+	display.DeepSleep()
+
+	println("You could remove power now")
+}
+
+func showRect(x int16, y int16, w int16, h int16, c color.RGBA) {
+	for i := x; i < x+w; i++ {
+		for j := y; j < y+h; j++ {
+			display.SetPixel(i, j, c)
+		}
+	}
+}

go.mod

@@ -5,8 +5,8 @@ go 1.15
 require (
 	github.com/eclipse/paho.mqtt.golang v1.2.0
 	github.com/frankban/quicktest v1.10.2
-	golang.org/x/net v0.0.0-20210614182718-04defd469f4e // indirect
+	golang.org/x/net v0.0.0-20210614182718-04defd469f4e
-	tinygo.org/x/tinyfont v0.2.1
+	tinygo.org/x/tinyfont v0.3.0
-	tinygo.org/x/tinyfs v0.1.0
+	tinygo.org/x/tinyfs v0.2.0
 	tinygo.org/x/tinyterm v0.1.0
 )

go.sum

@@ -5,12 +5,15 @@ github.com/frankban/quicktest v1.10.2 h1:19ARM85nVi4xH7xPXuc5eM/udya5ieh7b/Sv+d8
 github.com/frankban/quicktest v1.10.2/go.mod h1:K+q6oSqb0W0Ininfk863uOk1lMy69l/P6txr3mVT54s=
 github.com/google/go-cmp v0.5.2 h1:X2ev0eStA3AbceY54o37/0PQ/UWqKEiiO2dKL5OPaFM=
 github.com/google/go-cmp v0.5.2/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
+github.com/hajimehoshi/go-jisx0208 v1.0.0/go.mod h1:yYxEStHL7lt9uL+AbdWgW9gBumwieDoZCiB1f/0X0as=
 github.com/kr/pretty v0.2.1 h1:Fmg33tUaq4/8ym9TJN1x7sLJnHVwhP33CNkpYV/7rwI=
 github.com/kr/pretty v0.2.1/go.mod h1:ipq/a2n7PKx3OHsz4KJII5eveXtPO4qwEXGdVfWzfnI=
 github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
 github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
 github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
+github.com/sago35/go-bdf v0.0.0-20200313142241-6c17821c91c4/go.mod h1:rOebXGuMLsXhZAC6mF/TjxONsm45498ZyzVhel++6KM=
 github.com/valyala/fastjson v1.6.3/go.mod h1:CLCAqky6SMuOcxStkYQvblddUtoRxhYMGLrsQns1aXY=
+golang.org/x/image v0.0.0-20210628002857-a66eb6448b8d/go.mod h1:023OzeP/+EPmXeapQh35lcL3II3LrY8Ic+EFFKVhULM=
 golang.org/x/net v0.0.0-20210614182718-04defd469f4e h1:XpT3nA5TvE525Ne3hInMh6+GETgn27Zfm9dxsThnX2Q=
 golang.org/x/net v0.0.0-20210614182718-04defd469f4e/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
 golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
@@ -24,9 +27,12 @@ golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8T
 tinygo.org/x/drivers v0.14.0/go.mod h1:uT2svMq3EpBZpKkGO+NQHjxjGf1f42ra4OnMMwQL2aI=
 tinygo.org/x/drivers v0.15.1/go.mod h1:uT2svMq3EpBZpKkGO+NQHjxjGf1f42ra4OnMMwQL2aI=
 tinygo.org/x/drivers v0.16.0/go.mod h1:uT2svMq3EpBZpKkGO+NQHjxjGf1f42ra4OnMMwQL2aI=
-tinygo.org/x/tinyfont v0.2.1 h1:FAaemBzw8wsfhAtG6fWW+QjyWw/K8YqEeiWo4N1pv4o=
+tinygo.org/x/drivers v0.19.0/go.mod h1:uJD/l1qWzxzLx+vcxaW0eY464N5RAgFi1zTVzASFdqI=
 tinygo.org/x/tinyfont v0.2.1/go.mod h1:eLqnYSrFRjt5STxWaMeOWJTzrKhXqpWw7nU3bPfKOAM=
-tinygo.org/x/tinyfs v0.1.0 h1:yx1Tq9L60rpCm6HURo45x+Tnag+O9RGSbQfgeCb6XYU=
+tinygo.org/x/tinyfont v0.3.0 h1:HIRLQoI3oc+2CMhPcfv+Ig88EcTImE/5npjqOnMD4lM=
+tinygo.org/x/tinyfont v0.3.0/go.mod h1:+TV5q0KpwSGRWnN+ITijsIhrWYJkoUCp9MYELjKpAXk=
 tinygo.org/x/tinyfs v0.1.0/go.mod h1:ysc8Y92iHfhTXeyEM9+c7zviUQ4fN9UCFgSOFfMWv20=
+tinygo.org/x/tinyfs v0.2.0 h1:M0lwZC/dEGFt16XYN5GTQsif/qCkAN2qUVNxELVD1xg=
+tinygo.org/x/tinyfs v0.2.0/go.mod h1:6ZHYdvB3sFYeMB3ypmXZCNEnFwceKc61ADYTYHpep1E=
 tinygo.org/x/tinyterm v0.1.0 h1:80i+j+KWoxCFa/Xfp6pWbh79x+8zUdMXC1vaKj2QhkY=
 tinygo.org/x/tinyterm v0.1.0/go.mod h1:/DDhNnGwNF2/tNgHywvyZuCGnbH3ov49Z/6e8LPLRR4=

makeybutton/buffer.go

@@ -1,6 +1,6 @@
 package makeybutton
 
-const bufferSize = 10
+const bufferSize = 6
 
 // Buffer is a buffer to keep track of the most recent readings for a button.
 type Buffer struct {

makeybutton/button.go

@@ -6,7 +6,10 @@
 //
 package makeybutton
 
-import "machine"
+import (
+	"machine"
+	"time"
+)
 
 // ButtonState represents the state of a MakeyButton.
 type ButtonState int
@@ -36,9 +39,6 @@ type Button struct {
 
 // NewButton creates a new Button.
 func NewButton(pin machine.Pin) *Button {
-	pin.Configure(machine.PinConfig{Mode: machine.PinInput})
-	pin.Set(false)
-
 	return &Button{
 		pin:              pin,
 		state:            NeverPressed,
@@ -47,6 +47,18 @@ func NewButton(pin machine.Pin) *Button {
 	}
 }
 
+// Configure configures the Makey Button pin to have the correct settings to detect touches.
+func (b *Button) Configure() error {
+	// Note that we have to first turn on the pullup, and then turn off the pullup,
+	// in order for the pin to be properly floating.
+	b.pin.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	time.Sleep(10 * time.Millisecond)
+	b.pin.Configure(machine.PinConfig{Mode: machine.PinInput})
+	b.pin.Set(false)
+
+	return nil
+}
+
 // Get returns a ButtonEvent based on the most recent state of the button,
 // and if it has changed by being pressed or released.
 func (b *Button) Get() ButtonEvent {
@@ -61,7 +73,7 @@ func (b *Button) Get() ButtonEvent {
 	b.readings.Put(pressed)
 
 	switch {
-	case pressed && avg > 0:
+	case pressed && avg > -1*bufferSize+2:
 		if b.state == Press {
 			return NotChanged
 		}

net/http/tinygo.go

@@ -20,6 +20,11 @@ func SetBuf(b []byte) {
 }
 
 func (c *Client) Do(req *Request) (*Response, error) {
+	if c.Jar != nil {
+		for _, cookie := range c.Jar.Cookies(req.URL) {
+			req.AddCookie(cookie)
+		}
+	}
 	switch req.URL.Scheme {
 	case "http":
 		return c.doHTTP(req)
@@ -31,15 +36,17 @@ func (c *Client) Do(req *Request) (*Response, error) {
 }
 
 func (c *Client) doHTTP(req *Request) (*Response, error) {
-	if c.Jar != nil {
-		for _, cookie := range c.Jar.Cookies(req.URL) {
-			req.AddCookie(cookie)
-		}
-	}
-
 	// make TCP connection
-	ip := net.ParseIP(req.URL.Host)
+	ip := net.ParseIP(req.URL.Hostname())
-	raddr := &net.TCPAddr{IP: ip, Port: 80}
+	port := 80
+	if req.URL.Port() != "" {
+		p, err := strconv.ParseUint(req.URL.Port(), 0, 64)
+		if err != nil {
+			return nil, err
+		}
+		port = int(p)
+	}
+	raddr := &net.TCPAddr{IP: ip, Port: port}
 	laddr := &net.TCPAddr{Port: 8080}
 
 	conn, err := net.DialTCP("tcp", laddr, raddr)
@@ -178,12 +185,17 @@ func (c *Client) doResp(conn net.Conn, req *Request) (*Response, error) {
 			if err != nil {
 				println("Read error: " + err.Error())
 			} else {
-				idx := bytes.Index(buf[ofs:ofs+n], []byte("\r\n\r\n"))
+				// Take care of the case where "\r\n\r\n" is on the boundary of a buffer
+				start := ofs
+				if start > 3 {
+					start -= 3
+				}
+				idx := bytes.Index(buf[start:ofs+n], []byte("\r\n\r\n"))
 				if idx == -1 {
 					ofs += n
 					continue
 				}
-				idx += ofs + 4
+				idx += start + 4
 
 				scanner = bufio.NewScanner(bytes.NewReader(buf[0 : ofs+n]))
 				if resp.Status == "" && scanner.Scan() {
@@ -261,6 +273,9 @@ func (c *Client) doResp(conn net.Conn, req *Request) (*Response, error) {
 				return nil, fmt.Errorf("slice out of range : use http.SetBuf() to change the allocation to %d bytes or more", end)
 			}
 			n, err := conn.Read(buf[ofs : ofs+0x400])
+			if err != nil {
+				return nil, err
+			}
 			if n == 0 {
 				continue
 			}

net/mqtt/mqtt.go

@@ -5,6 +5,7 @@ package mqtt
 import (
 	"errors"
 	"strings"
+	"sync"
 	"time"
 
 	"github.com/eclipse/paho.mqtt.golang/packets"
@@ -19,20 +20,32 @@ import (
 func NewClient(o *ClientOptions) Client {
 	c := &mqttclient{opts: o, adaptor: o.Adaptor}
 	c.msgRouter, c.stopRouter = newRouter()
+
+	c.inboundPacketChan = make(chan packets.ControlPacket, 10)
+	c.stopInbound = make(chan struct{})
+	c.incomingPubChan = make(chan *packets.PublishPacket, 10)
+	// this launches a goroutine, so only call once per client:
+	c.msgRouter.matchAndDispatch(c.incomingPubChan, c.opts.Order, c)
 	return c
 }
 
 type mqttclient struct {
-	adaptor         net.Adapter
+	adaptor           net.Adapter
-	conn            net.Conn
+	conn              net.Conn
-	connected       bool
+	connected         bool
-	opts            *ClientOptions
+	opts              *ClientOptions
-	mid             uint16
+	mid               uint16
-	inbound         chan packets.ControlPacket
+	inboundPacketChan chan packets.ControlPacket
-	stop            chan struct{}
+	stopInbound       chan struct{}
-	msgRouter       *router
+	msgRouter         *router
-	stopRouter      chan bool
+	stopRouter        chan bool
-	incomingPubChan chan *packets.PublishPacket
+	incomingPubChan   chan *packets.PublishPacket
+	// stats for keepalive
+	lastReceive time.Time
+	lastSend    time.Time
+	// keep track of routines and signal a shutdown
+	workers  sync.WaitGroup
+	shutdown bool
 }
 
 // AddRoute allows you to add a handler for messages on a specific topic
@@ -56,6 +69,9 @@ func (c *mqttclient) IsConnectionOpen() bool {
 
 // Connect will create a connection to the message broker.
 func (c *mqttclient) Connect() Token {
+	if c.IsConnected() {
+		return &mqtttoken{}
+	}
 	var err error
 
 	// make connection
@@ -77,10 +93,6 @@ func (c *mqttclient) Connect() Token {
 	}
 
 	c.mid = 1
-	c.inbound = make(chan packets.ControlPacket, 10)
-	c.stop = make(chan struct{})
-	c.incomingPubChan = make(chan *packets.PublishPacket, 10)
-	c.msgRouter.matchAndDispatch(c.incomingPubChan, c.opts.Order, c)
 
 	// send the MQTT connect message
 	connectPkt := packets.NewControlPacket(packets.Connect).(*packets.ConnectPacket)
@@ -98,7 +110,7 @@ func (c *mqttclient) Connect() Token {
 	connectPkt.ClientIdentifier = c.opts.ClientID
 	connectPkt.ProtocolVersion = byte(c.opts.ProtocolVersion)
 	connectPkt.ProtocolName = "MQTT"
-	connectPkt.Keepalive = 60
+	connectPkt.Keepalive = uint16(c.opts.KeepAlive)
 
 	connectPkt.WillFlag = c.opts.WillEnabled
 	connectPkt.WillTopic = c.opts.WillTopic
@@ -110,6 +122,7 @@ func (c *mqttclient) Connect() Token {
 	if err != nil {
 		return &mqtttoken{err: err}
 	}
+	c.lastSend = time.Now()
 
 	// TODO: handle timeout as ReadPacket blocks until it gets a packet.
 	// CONNECT response.
@@ -127,20 +140,36 @@ func (c *mqttclient) Connect() Token {
 		}
 	}
 
-	go readMessages(c)
 	go processInbound(c)
+	go readMessages(c)
+	go keepAlive(c)
 
 	return &mqtttoken{}
 }
 
 // Disconnect will end the connection with the server, but not before waiting
 // the specified number of milliseconds to wait for existing work to be
-// completed.
+// completed. Blocks until disconnected.
 func (c *mqttclient) Disconnect(quiesce uint) {
-	c.conn.Close()
+	c.shutdownRoutines()
+	// block until all done
+	for c.connected {
+		time.Sleep(time.Millisecond * 10)
+	}
 	return
 }
 
+// shutdownRoutines will disconnect and shut down all processes. If you want to trigger a
+// disconnect internally, make sure you call this instead of Disconnect() to avoid deadlocks
+func (c *mqttclient) shutdownRoutines() {
+	if c.shutdown {
+		return
+	}
+	c.shutdown = true
+	c.conn.Close()
+	c.stopInbound <- struct{}{}
+}
+
 // Publish will publish a message with the specified QoS and content
 // to the specified topic.
 // Returns a token to track delivery of the message to the broker
@@ -153,6 +182,7 @@ func (c *mqttclient) Publish(topic string, qos byte, retained bool, payload inte
 	pub.Qos = qos
 	pub.TopicName = topic
 	pub.Retain = retained
+
 	switch payload.(type) {
 	case string:
 		pub.Payload = []byte(payload.(string))
@@ -168,6 +198,8 @@ func (c *mqttclient) Publish(topic string, qos byte, retained bool, payload inte
 	if err != nil {
 		return &mqtttoken{err: err}
 	}
+	// update this for every control message that is sent successfully, for keepalive
+	c.lastSend = time.Now()
 
 	return &mqtttoken{}
 }
@@ -195,6 +227,7 @@ func (c *mqttclient) Subscribe(topic string, qos byte, callback MessageHandler)
 	if err != nil {
 		return &mqtttoken{err: err}
 	}
+	c.lastSend = time.Now()
 
 	return &mqtttoken{}
 }
@@ -220,12 +253,13 @@ func (c *mqttclient) OptionsReader() ClientOptionsReader {
 }
 
 func processInbound(c *mqttclient) {
+PROCESS:
 	for {
 		select {
-		case msg := <-c.inbound:
+		case msg := <-c.inboundPacketChan:
 			switch m := msg.(type) {
 			case *packets.PingrespPacket:
-				// TODO: handle this
+				// println("pong")
 			case *packets.SubackPacket:
 				// TODO: handle this
 			case *packets.UnsubackPacket:
@@ -242,33 +276,85 @@ func processInbound(c *mqttclient) {
 			case *packets.PubcompPacket:
 				// TODO: handle this
 			}
-		case <-c.stop:
+		case <-c.stopInbound:
-			return
+			break PROCESS
 		}
 	}
+
+	// as this routine could be the last to finish (if a lot of messages are queued in the
+	// channel), it is the last to turn out the lights
+
+	c.workers.Wait()
+	c.connected = false
+	c.shutdown = false
 }
 
 // readMessages reads incoming messages off the wire.
-// incoming messages are then send into inbound channel.
+// incoming messages are then send into inbound buffered channel.
 func readMessages(c *mqttclient) {
+	c.workers.Add(1)
+	defer c.workers.Done()
+
 	var err error
 	var cp packets.ControlPacket
 
-PROCESS:
+	for !c.shutdown {
-	for {
 		if cp, err = c.ReadPacket(); err != nil {
-			break PROCESS
+			c.shutdownRoutines()
+			return
 		}
 		if cp != nil {
-			c.inbound <- cp
+			c.inboundPacketChan <- cp
-			// TODO: Notify keepalive logic that we recently received a packet
+			// notify keepalive logic that we recently received a packet
+			c.lastReceive = time.Now()
 		}
 
 		time.Sleep(100 * time.Millisecond)
 	}
+}
 
-	// TODO: handle if we received an error on read.
+// keepAlive is a goroutine to handle sending ping requests according to the MQTT spec. If the keepalive time has
-	// If disconnect is in progress, swallow error and return
+// been reached with no messages being sent, we will send a ping request and check back to see if we've
+// had any activity by the timeout. If not, disconnect.
+func keepAlive(c *mqttclient) {
+	c.workers.Add(1)
+	defer c.workers.Done()
+
+	var err error
+	var ping *packets.PingreqPacket
+	var timeout, pingsent time.Time
+
+	for !c.shutdown {
+		// As long as we haven't reached the keepalive value...
+		if time.Since(c.lastSend) < time.Duration(c.opts.KeepAlive)*time.Second {
+			// ...sleep and check shutdown status again
+			time.Sleep(time.Millisecond * 100)
+			continue
+		}
+
+		// value has been reached, so send a ping request
+		ping = packets.NewControlPacket(packets.Pingreq).(*packets.PingreqPacket)
+		if err = ping.Write(c.conn); err != nil {
+			// if connection is lost, report disconnect
+			c.shutdownRoutines()
+			return
+		}
+		// println("ping")
+
+		c.lastSend = time.Now()
+		pingsent = time.Now()
+		timeout = pingsent.Add(c.opts.PingTimeout)
+
+		// as long as we are still connected and haven't received anything after the ping...
+		for !c.shutdown && c.lastReceive.Before(pingsent) {
+			// if the timeout has passed, disconnect
+			if time.Now().After(timeout) {
+				c.shutdownRoutines()
+				return
+			}
+			time.Sleep(time.Millisecond * 100)
+		}
+	}
 }
 
 func (c *mqttclient) ackFunc(packet *packets.PublishPacket) func() {

net/mqtt/paho.go

@@ -210,7 +210,7 @@ type ClientOptions struct {
 
 // NewClientOptions returns a new ClientOptions struct.
 func NewClientOptions() *ClientOptions {
-	return &ClientOptions{Adaptor: net.ActiveDevice, ProtocolVersion: 4}
+	return &ClientOptions{Adaptor: net.ActiveDevice, ProtocolVersion: 4, KeepAlive: 60, PingTimeout: time.Second * 10}
 }
 
 // AddBroker adds a broker URI to the list of brokers to be used. The format should be
@@ -257,6 +257,23 @@ func (o *ClientOptions) SetPassword(p string) *ClientOptions {
 	return o
 }
 
+// SetKeepAlive will set the amount of time (in seconds) that the client
+// should wait before sending a PING request to the broker. This will
+// allow the client to know that a connection has not been lost with the
+// server.
+func (o *ClientOptions) SetKeepAlive(k time.Duration) *ClientOptions {
+	o.KeepAlive = int64(k / time.Second)
+	return o
+}
+
+// SetPingTimeout will set the amount of time (in seconds) that the client
+// will wait after sending a PING request to the broker, before deciding
+// that the connection has been lost. Default is 10 seconds.
+func (o *ClientOptions) SetPingTimeout(k time.Duration) *ClientOptions {
+	o.PingTimeout = k
+	return o
+}
+
 // SetWill accepts a string will message to be set. When the client connects,
 // it will give this will message to the broker, which will then publish the
 // provided payload (the will) to any clients that are subscribed to the provided

rtl8720dn/netdriver.go

@@ -118,6 +118,9 @@ func (r *RTL8720DN) ConnectSSLSocket(addr, port string) error {
 	if r.debug {
 		fmt.Printf("ConnectSSLSocket(%q, %q)\r\n", addr, port)
 	}
+	if r.root_ca == nil {
+		return fmt.Errorf("root_ca is not set")
+	}
 
 	client, err := r.Rpc_wifi_ssl_client_create()
 	if err != nil {
@@ -224,7 +227,7 @@ func (r *RTL8720DN) DisconnectSocket() error {
 		fmt.Printf("DisconnectSocket()\r\n")
 	}
 	switch r.connectionType {
-	case ConnectionTypeTCP:
+	case ConnectionTypeTCP, ConnectionTypeUDP:
 		_, err := r.Rpc_lwip_close(r.socket)
 		if err != nil {
 			return err

version.go

@@ -2,4 +2,4 @@ package drivers
 
 // Version returns a user-readable string showing the version of the drivers package for support purposes.
 // Update this value before release of new version of software.
-const Version = "0.21.0"
+const Version = "0.22.0"

waveshare-epd/epd2in9/epd2in9.go

@@ -0,0 +1,291 @@
+// Package epd2in9 implements a driver for Waveshare 2.9in black and white e-paper device.
+//
+// Note: this is for the V1 device (using IL3820), the V2 device uses a different chipset.
+//
+// Datasheets:
+//   https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf
+//   https://www.smart-prototyping.com/image/data/9_Modules/EinkDisplay/GDE029A1/IL3820.pdf
+//
+// This implementation is essentially a copy of the 2in13 driver with the correct LUTs and
+// default size for the 2.9in device.
+//
+package epd2in9 // import "tinygo.org/x/drivers/waveshare-epd/epd2in9"
+
+import (
+	"image/color"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+type Config struct {
+	Width        int16 // Width is the display resolution
+	Height       int16
+	LogicalWidth int16    // LogicalWidth must be a multiple of 8 and same size or bigger than Width
+	Rotation     Rotation // Rotation is clock-wise
+}
+
+type Device struct {
+	bus          drivers.SPI
+	cs           machine.Pin
+	dc           machine.Pin
+	rst          machine.Pin
+	busy         machine.Pin
+	logicalWidth int16
+	width        int16
+	height       int16
+	buffer       []uint8
+	bufferLength uint32
+	rotation     Rotation
+}
+
+type Rotation uint8
+
+// Look up table for full updates
+var lutFullUpdate = [30]uint8{
+	0x50, 0xAA, 0x55, 0xAA, 0x11, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0xFF, 0xFF, 0x1F, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+}
+
+// Look up table for partial updates, faster but there will be some ghosting
+var lutPartialUpdate = [30]uint8{
+	0x10, 0x18, 0x18, 0x08, 0x18, 0x18,
+	0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x13, 0x14, 0x44, 0x12,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+}
+
+// New returns a new epd2in9 driver. Pass in a fully configured SPI bus.
+func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
+	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+	return Device{
+		bus:  bus,
+		cs:   csPin,
+		dc:   dcPin,
+		rst:  rstPin,
+		busy: busyPin,
+	}
+}
+
+// Configure sets up the device.
+func (d *Device) Configure(cfg Config) {
+	if cfg.LogicalWidth != 0 {
+		d.logicalWidth = cfg.LogicalWidth
+	} else {
+		d.logicalWidth = 128
+	}
+	if cfg.Width != 0 {
+		d.width = cfg.Width
+	} else {
+		d.width = 128
+	}
+	if cfg.Height != 0 {
+		d.height = cfg.Height
+	} else {
+		d.height = 296
+	}
+	d.rotation = cfg.Rotation
+	d.bufferLength = (uint32(d.logicalWidth) * uint32(d.height)) / 8
+	d.buffer = make([]uint8, d.bufferLength)
+	for i := uint32(0); i < d.bufferLength; i++ {
+		d.buffer[i] = 0xFF
+	}
+
+	d.cs.Low()
+	d.dc.Low()
+	d.rst.Low()
+
+	d.Reset()
+
+	d.SendCommand(DRIVER_OUTPUT_CONTROL)
+	d.SendData(uint8((d.height - 1) & 0xFF))
+	d.SendData(uint8(((d.height - 1) >> 8) & 0xFF))
+	d.SendData(0x00) // GD = 0; SM = 0; TB = 0;
+	d.SendCommand(BOOSTER_SOFT_START_CONTROL)
+	d.SendData(0xD7)
+	d.SendData(0xD6)
+	d.SendData(0x9D)
+	d.SendCommand(WRITE_VCOM_REGISTER)
+	d.SendData(0xA8) // VCOM 7C
+	d.SendCommand(SET_DUMMY_LINE_PERIOD)
+	d.SendData(0x1A) // 4 dummy lines per gate
+	d.SendCommand(SET_GATE_TIME)
+	d.SendData(0x08) // 2us per line
+	d.SendCommand(DATA_ENTRY_MODE_SETTING)
+	d.SendData(0x03) // X increment; Y increment
+
+	d.SetLUT(true)
+}
+
+// Reset resets the device
+func (d *Device) Reset() {
+	d.rst.Low()
+	time.Sleep(200 * time.Millisecond)
+	d.rst.High()
+	time.Sleep(200 * time.Millisecond)
+}
+
+// DeepSleep puts the display into deepsleep
+func (d *Device) DeepSleep() {
+	d.SendCommand(DEEP_SLEEP_MODE)
+	d.WaitUntilIdle()
+}
+
+// SendCommand sends a command to the display
+func (d *Device) SendCommand(command uint8) {
+	d.sendDataCommand(true, command)
+}
+
+// SendData sends a data byte to the display
+func (d *Device) SendData(data uint8) {
+	d.sendDataCommand(false, data)
+}
+
+// sendDataCommand sends image data or a command to the screen
+func (d *Device) sendDataCommand(isCommand bool, data uint8) {
+	if isCommand {
+		d.dc.Low()
+	} else {
+		d.dc.High()
+	}
+	d.cs.Low()
+	d.bus.Transfer(data)
+	d.cs.High()
+}
+
+// SetLUT sets the look up tables for full or partial updates
+func (d *Device) SetLUT(fullUpdate bool) {
+	d.SendCommand(WRITE_LUT_REGISTER)
+	if fullUpdate {
+		for i := 0; i < 30; i++ {
+			d.SendData(lutFullUpdate[i])
+		}
+	} else {
+		for i := 0; i < 30; i++ {
+			d.SendData(lutPartialUpdate[i])
+		}
+	}
+}
+
+// SetPixel modifies the internal buffer in a single pixel.
+// The display have 2 colors: black and white
+// We use RGBA(0,0,0, 255) as white (transparent)
+// Anything else as black
+func (d *Device) SetPixel(x int16, y int16, c color.RGBA) {
+	x, y = d.xy(x, y)
+	if x < 0 || x >= d.logicalWidth || y < 0 || y >= d.height {
+		return
+	}
+	byteIndex := (int32(x) + int32(y)*int32(d.logicalWidth)) / 8
+	if c.R == 0 && c.G == 0 && c.B == 0 { // TRANSPARENT / WHITE
+		d.buffer[byteIndex] |= 0x80 >> uint8(x%8)
+	} else { // WHITE / EMPTY
+		d.buffer[byteIndex] &^= 0x80 >> uint8(x%8)
+	}
+}
+
+// Display sends the buffer to the screen.
+func (d *Device) Display() error {
+	d.setMemoryArea(0, 0, d.logicalWidth-1, d.height-1)
+	for j := int16(0); j < d.height; j++ {
+		d.setMemoryPointer(0, j)
+		d.SendCommand(WRITE_RAM)
+		for i := int16(0); i < d.logicalWidth/8; i++ {
+			d.SendData(d.buffer[i+j*(d.logicalWidth/8)])
+		}
+	}
+
+	d.SendCommand(DISPLAY_UPDATE_CONTROL_2)
+	d.SendData(0xC4)
+	d.SendCommand(MASTER_ACTIVATION)
+	d.SendCommand(TERMINATE_FRAME_READ_WRITE)
+	return nil
+}
+
+// ClearDisplay erases the device SRAM
+func (d *Device) ClearDisplay() {
+	d.setMemoryArea(0, 0, d.logicalWidth-1, d.height-1)
+	d.setMemoryPointer(0, 0)
+	d.SendCommand(WRITE_RAM)
+	for i := uint32(0); i < d.bufferLength; i++ {
+		d.SendData(0xFF)
+	}
+	d.Display()
+}
+
+// setMemoryArea sets the area of the display that will be updated
+func (d *Device) setMemoryArea(x0 int16, y0 int16, x1 int16, y1 int16) {
+	d.SendCommand(SET_RAM_X_ADDRESS_START_END_POSITION)
+	d.SendData(uint8((x0 >> 3) & 0xFF))
+	d.SendData(uint8((x1 >> 3) & 0xFF))
+	d.SendCommand(SET_RAM_Y_ADDRESS_START_END_POSITION)
+	d.SendData(uint8(y0 & 0xFF))
+	d.SendData(uint8((y0 >> 8) & 0xFF))
+	d.SendData(uint8(y1 & 0xFF))
+	d.SendData(uint8((y1 >> 8) & 0xFF))
+}
+
+// setMemoryPointer moves the internal pointer to the speficied coordinates
+func (d *Device) setMemoryPointer(x int16, y int16) {
+	d.SendCommand(SET_RAM_X_ADDRESS_COUNTER)
+	d.SendData(uint8((x >> 3) & 0xFF))
+	d.SendCommand(SET_RAM_Y_ADDRESS_COUNTER)
+	d.SendData(uint8(y & 0xFF))
+	d.SendData(uint8((y >> 8) & 0xFF))
+	d.WaitUntilIdle()
+}
+
+// WaitUntilIdle waits until the display is ready
+func (d *Device) WaitUntilIdle() {
+	for d.busy.Get() {
+		time.Sleep(100 * time.Millisecond)
+	}
+}
+
+// IsBusy returns the busy status of the display
+func (d *Device) IsBusy() bool {
+	return d.busy.Get()
+}
+
+// ClearBuffer sets the buffer to 0xFF (white)
+func (d *Device) ClearBuffer() {
+	for i := uint32(0); i < d.bufferLength; i++ {
+		d.buffer[i] = 0xFF
+	}
+}
+
+// Size returns the current size of the display.
+func (d *Device) Size() (w, h int16) {
+	if d.rotation == ROTATION_90 || d.rotation == ROTATION_270 {
+		return d.height, d.logicalWidth
+	}
+	return d.logicalWidth, d.height
+}
+
+// SetRotation changes the rotation (clock-wise) of the device
+func (d *Device) SetRotation(rotation Rotation) {
+	d.rotation = rotation
+}
+
+// xy chages the coordinates according to the rotation
+func (d *Device) xy(x, y int16) (int16, int16) {
+	switch d.rotation {
+	case NO_ROTATION:
+		return x, y
+	case ROTATION_90:
+		return d.width - y - 1, x
+	case ROTATION_180:
+		return d.width - x - 1, d.height - y - 1
+	case ROTATION_270:
+		return y, d.height - x - 1
+	}
+	return x, y
+}

waveshare-epd/epd2in9/registers.go

@@ -0,0 +1,31 @@
+package epd2in9
+
+// Registers
+const (
+	DRIVER_OUTPUT_CONTROL                = 0x01
+	BOOSTER_SOFT_START_CONTROL           = 0x0C
+	GATE_SCAN_START_POSITION             = 0x0F
+	DEEP_SLEEP_MODE                      = 0x10
+	DATA_ENTRY_MODE_SETTING              = 0x11
+	SW_RESET                             = 0x12
+	TEMPERATURE_SENSOR_CONTROL           = 0x1A
+	MASTER_ACTIVATION                    = 0x20
+	DISPLAY_UPDATE_CONTROL_1             = 0x21
+	DISPLAY_UPDATE_CONTROL_2             = 0x22
+	WRITE_RAM                            = 0x24
+	WRITE_VCOM_REGISTER                  = 0x2C
+	WRITE_LUT_REGISTER                   = 0x32
+	SET_DUMMY_LINE_PERIOD                = 0x3A
+	SET_GATE_TIME                        = 0x3B
+	BORDER_WAVEFORM_CONTROL              = 0x3C
+	SET_RAM_X_ADDRESS_START_END_POSITION = 0x44
+	SET_RAM_Y_ADDRESS_START_END_POSITION = 0x45
+	SET_RAM_X_ADDRESS_COUNTER            = 0x4E
+	SET_RAM_Y_ADDRESS_COUNTER            = 0x4F
+	TERMINATE_FRAME_READ_WRITE           = 0xFF
+
+	NO_ROTATION  Rotation = 0
+	ROTATION_90  Rotation = 1 // 90 degrees clock-wise rotation
+	ROTATION_180 Rotation = 2
+	ROTATION_270 Rotation = 3
+)