According to man page accept(2), accept returns new client sockfd and
remote peer ip:port. This patch corrects the Accept() prototype in the
netdever interface to not take in an ip:port arg, but rather return an
ip:port for remote peer.
Tested with examples/net/tcpecho on wioterminal and nano-rp2040. Here's
a run with wioterminal:
SERVER
============
sfeldma@nuc:~/work/drivers$ tinygo flash -monitor -target wioterminal -size short -stack-size=8kb ./examples/net/tcpecho
code data bss | flash ram
110876 2552 11212 | 113428 13764
Connected to /dev/ttyACM2. Press Ctrl-C to exit.
Realtek rtl8720dn Wifi network device driver (rtl8720dn)
Driver version : 0.0.1
RTL8720 firmware version : 2.1.2
MAC address : 2c:f7:f1:1c:9b:2f
Connecting to Wifi SSID 'test'...CONNECTED
DHCP-assigned IP : 10.0.0.140
DHCP-assigned subnet : 255.255.255.0
DHCP-assigned gateway : 10.0.0.1
Starting TCP server listening on :8080
Client 10.0.0.190:50000 connected
Client 10.0.0.190:50000 closed
CLIENT
=============
nc -p 50000 10.0.0.140 8080
This moves the netdev/netlink namespace out of drivers and into their
own packages. Also, defines netdev and netlink as L3/L4 and L2 OSI
layers, respectively. Move some L3 functionality from netlink to
netdev (GetIPAddr).
For netlink, add ConnectParams for NetConnect to pass in L2 connection
parameters (ssid, pass, auth_type, etc). Also adds connection mode
(STA, AP, etc).
For netlink, add SendEth and RecvEthFunc funcs to handle L2 send/recv of
Ethernet pkts.
deadprogram
Scott Feldman