Client driver for WiFiNINA firmware (#98)

* wifinina: implementation of WiFiNINA driver, including: - TCP client example is working - reading sockets and mqtt working - switched over to common net package also used by espat package - smoke tests and updated README for wifinina
2026-08-21 15:09:00 +00:00 · 2019-12-22 04:25:10 -05:00
parent cc5ecafacf
commit e80a22d0ba
10 changed files with 1888 additions and 0 deletions
@@ -0,0 +1,143 @@
+// This example opens a TCP connection using a device with WiFiNINA firmware
+// and sends some data, for the purpose of testing speed and connectivity.
+//
+// You can open a server to accept connections from this program using:
+//
+// nc -w 5 -lk 8080
+//
+package main
+
+import (
+	"bytes"
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const serverIP = ""
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor = &wifinina.Device{
+		SPI:   spi,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	console = machine.UART0
+)
+
+var buf = &bytes.Buffer{}
+
+func main() {
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		MOSI:      machine.NINA_MOSI,
+		MISO:      machine.NINA_MISO,
+		SCK:       machine.NINA_SCK,
+	})
+
+	adaptor.Configure()
+
+	connectToAP()
+
+	for {
+		sendBatch()
+		time.Sleep(500 * time.Millisecond)
+	}
+	println("Done.")
+}
+
+func sendBatch() {
+
+	// make TCP connection
+	ip := net.ParseIP(serverIP)
+	raddr := &net.TCPAddr{IP: ip, Port: 8080}
+	laddr := &net.TCPAddr{Port: 8080}
+
+	message("---------------\r\nDialing TCP connection")
+	conn, err := net.DialTCP("tcp", laddr, raddr)
+	for ; err != nil; conn, err = net.DialTCP("tcp", laddr, raddr) {
+		message(err.Error())
+		time.Sleep(5 * time.Second)
+	}
+
+	n := 0
+	w := 0
+	start := time.Now()
+
+	// send data
+	message("Sending data")
+
+	for i := 0; i < 1000; i++ {
+		buf.Reset()
+		fmt.Fprint(buf,
+			"\r---------------------------- i == ", i, " ----------------------------"+
+				"\r---------------------------- i == ", i, " ----------------------------")
+		if w, err = conn.Write(buf.Bytes()); err != nil {
+			println("error:", err.Error(), "\r")
+			continue
+		}
+		n += w
+	}
+
+	buf.Reset()
+	ms := time.Now().Sub(start).Milliseconds()
+	fmt.Fprint(buf, "\nWrote ", n, " bytes in ", ms, " ms\r\n")
+	message(buf.String())
+
+	if _, err := conn.Write(buf.Bytes()); err != nil {
+		println("error:", err.Error(), "\r")
+	}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting TCP...")
+	conn.Close()
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}