adafruit4650: support for Adafruite 4650 feather OLED

adafruit4650/device.go

@@ -0,0 +1,196 @@
+// Package adafruit4650 implements a driver for the Adafruit FeatherWing OLED - 128x64 OLED display.
+// The display is backed itself by a SH1107 driver chip.
+//
+// Store: https://www.adafruit.com/product/4650
+//
+// Documentation: https://learn.adafruit.com/adafruit-128x64-oled-featherwing
+package adafruit4650
+
+import (
+	"image/color"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+const DefaultAddress = 0x3c
+
+const (
+	commandSetLowColumn  = 0x00
+	commandSetHighColumn = 0x10
+	commandSetPage       = 0xb0
+)
+
+const (
+	width  = 128
+	height = 64
+)
+
+// Device represents an Adafruit 4650 device
+type Device struct {
+	bus     drivers.I2C
+	Address uint8
+	buffer  []byte
+	width   int16
+	height  int16
+}
+
+// New creates a new device, not configuring anything yet.
+func New(bus drivers.I2C) Device {
+	return Device{
+		bus:     bus,
+		Address: DefaultAddress,
+		width:   width,
+		height:  height,
+	}
+}
+
+// Configure initializes the display with default configuration
+func (d *Device) Configure() error {
+
+	bufferSize := d.width * d.height / 8
+	d.buffer = make([]byte, bufferSize)
+
+	// This sequence is an amalgamation of the datasheet, official Arduino driver, CircuitPython driver and other drivers
+	initSequence := []byte{
+		0xae, // display off, sleep mode
+		//0xd5, 0x41, // set display clock divider (from original datasheet)
+		0xd5, 0x51, // set display clock divider (from Adafruit driver)
+		0xd9, 0x22, // pre-charge/dis-charge period mode: 2 DCLKs/2 DCLKs (POR)
+		0x20,       // memory mode
+		0x81, 0x4f, // contrast setting = 0x4f
+		0xad, 0x8a, // set dc/dc pump
+		0xa0,       // segment remap, flip-x
+		0xc0,       // common output scan direction
+		0xdc, 0x00, // set display start line 0 (POR=0)
+		0xa8, 0x3f, // multiplex ratio, height - 1 = 0x3f
+		0xd3, 0x60, // set display offset mode = 0x60
+		0xdb, 0x35, // VCOM deselect level = 0.770 (POR)
+		0xa4, // entire display off, retain RAM, normal status (POR)
+		0xa6, // normal (not reversed) display
+		0xaf, // display on
+	}
+
+	err := d.writeCommands(initSequence)
+	if err != nil {
+		return err
+	}
+
+	// recommended in the datasheet, same in other drivers
+	time.Sleep(100 * time.Millisecond)
+
+	return nil
+}
+
+// ClearDisplay clears the image buffer as well as the actual display
+func (d *Device) ClearDisplay() error {
+	d.ClearBuffer()
+	return d.Display()
+}
+
+// ClearBuffer clears the buffer
+func (d *Device) ClearBuffer() {
+	bzero(d.buffer)
+}
+
+// SetPixel modifies the internal buffer. Since this display has a bit-depth of 1 bit any non-zero
+// color component will be treated as 'on',  otherwise 'off'.
+func (d *Device) SetPixel(x int16, y int16, c color.RGBA) {
+	if x < 0 || x >= d.width || y < 0 || y >= d.height {
+		return
+	}
+
+	// RAM layout
+	//    *-----> y
+	//    |
+	//   x|     col0  col1  ... col63
+	//    v  p0  a0    b0         ..
+	//           a1    b1         ..
+	//           ..    ..         ..
+	//           a7    b7         ..
+	//       p1  a0    b0
+	//           a1    b1
+	//
+
+	//flip y - so the display orientation matches the silk screen labeling etc.
+	y = d.height - y - 1
+
+	page := x / 8
+	bytesPerPage := d.height
+	byteIndex := y + bytesPerPage*page
+	bit := x % 8
+	if (c.R | c.G | c.B) != 0 {
+		d.buffer[byteIndex] |= 1 << uint8(bit)
+	} else {
+		d.buffer[byteIndex] &^= 1 << uint8(bit)
+	}
+}
+
+// Display sends the whole buffer to the screen
+func (d *Device) Display() error {
+
+	bytesPerPage := d.height
+
+	pages := (d.width + 7) / 8
+	for page := int16(0); page < pages; page++ {
+
+		err := d.setRAMPosition(uint8(page), 0)
+		if err != nil {
+			return err
+		}
+
+		offset := page * bytesPerPage
+		err = d.writeRAM(d.buffer[offset : offset+bytesPerPage])
+		if err != nil {
+			return err
+		}
+	}
+
+	return nil
+}
+
+// setRAMPosition updates the device's current page and column position
+func (d *Device) setRAMPosition(page uint8, column uint8) error {
+	if page > 15 {
+		panic("page out of bounds")
+	}
+	if column > 127 {
+		panic("column out of bounds")
+	}
+	setPage := commandSetPage | (page & 0xF)
+
+	lo := column & 0xF
+	setLowColumn := commandSetLowColumn | lo
+
+	hi := (column >> 4) & 0x7
+	setHighColumn := commandSetHighColumn | hi
+
+	cmds := []byte{
+		setPage,
+		setLowColumn,
+		setHighColumn,
+	}
+
+	return d.writeCommands(cmds)
+}
+
+// Size returns the current size of the display.
+func (d *Device) Size() (w, h int16) {
+	return d.width, d.height
+}
+
+func (d *Device) writeCommands(commands []byte) error {
+	onlyCommandsFollowing := byte(0x00)
+	return d.bus.Tx(uint16(d.Address), append([]byte{onlyCommandsFollowing}, commands...), nil)
+}
+
+func (d *Device) writeRAM(data []byte) error {
+	onlyRAMFollowing := byte(0x40)
+	return d.bus.Tx(uint16(d.Address), append([]byte{onlyRAMFollowing}, data...), nil)
+}
+
+func bzero(buf []byte) {
+	for i := range buf {
+		buf[i] = 0
+	}
+}

adafruit4650/device_test.go

@@ -0,0 +1,176 @@
+package adafruit4650
+
+import (
+	"bytes"
+	_ "embed"
+	"encoding/hex"
+	"fmt"
+	"image"
+	"image/color"
+	"image/draw"
+	"image/png"
+	"os"
+	"testing"
+	"time"
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/freemono"
+)
+
+//go:embed expected_hello_world.png
+var expectedHelloWorld []byte
+
+// mockBus mocks a fake i2c device adafruit4650 display.
+// The memory layout assumes that clients set up the device in a particular way and always send complete
+// pages to the device buffer.
+type mockBus struct {
+	img           draw.Image
+	line          int
+	addr          uint8
+	currentPage   int
+	currentColumn int
+}
+
+func (m *mockBus) Tx(addr uint16, w, r []byte) error {
+	if addr != uint16(m.addr) {
+		panic("unexpected address")
+	}
+	if r != nil {
+		panic("mock does not support reads")
+	}
+
+	if w[0] == 0x00 {
+		if w[1]&0xf0 == 0xb0 {
+			m.currentPage = int(w[1] & 0x0f)
+
+			lo := w[2] & 0x0f
+			hi := w[2] & 0x07
+			m.currentColumn = int(hi<<4 | lo)
+		}
+		return nil
+	}
+	if w[0] != 0x40 {
+		panic("unexpected first byte: " + hex.EncodeToString(w[0:1]))
+	}
+
+	return m.writeRAM(w[1:])
+}
+
+func newMock() *mockBus {
+
+	m := image.NewRGBA(image.Rect(0, 0, width, height))
+	return &mockBus{img: m, addr: DefaultAddress, currentPage: -1, currentColumn: -1}
+}
+
+func (m *mockBus) writeRAM(data []byte) error {
+
+	// RAM layout
+	//    *-----> y
+	//    |
+	//   x|     col0  col1  ... col63
+	//    v  p0  a0    b0         ..
+	//           a1    b1         ..
+	//           ..    ..         ..
+	//           a7    b7         ..
+	//       p1  a0    b0
+	//           a1    b1
+	//
+
+	fmt.Printf("writing page %d\n", m.currentPage)
+	// assuming entire pages will be written
+	for x := 0; x < 8; x++ {
+		for y := 0; y < height; y++ {
+
+			col := data[y]
+
+			c := color.Black
+			if col&(1<<x) != 0 {
+				c = color.White
+			}
+
+			m.img.Set(x+m.currentPage*8, height-y-1, c)
+		}
+	}
+
+	return nil
+}
+
+func (m *mockBus) toImage() *image.RGBA {
+
+	container := image.NewRGBA(m.img.Bounds().Inset(-1))
+	draw.Draw(container, container.Bounds(), image.NewUniform(color.RGBA{G: 255, A: 255}), image.Point{}, draw.Over)
+	draw.Draw(container, m.img.Bounds(), m.img, image.Point{}, draw.Over)
+	return container
+}
+
+func TestDevice_Display(t *testing.T) {
+
+	bus := newMock()
+	dev := New(bus)
+
+	dev.Configure()
+
+	drawPlus(&dev)
+	drawHellowWorld(&dev)
+
+	//when
+	dev.Display()
+
+	//then
+	actual := bus.toImage()
+
+	expected, err := png.Decode(bytes.NewReader(expectedHelloWorld))
+	if err != nil {
+		panic(err)
+	}
+
+	assertEqualImages(t, actual, expected)
+}
+
+func drawPlus(d drivers.Displayer) {
+	for i := int16(0); i < 128; i++ {
+		d.SetPixel(i, 32, color.RGBA{R: 1})
+	}
+	for i := int16(0); i < 64; i++ {
+		d.SetPixel(64, i, color.RGBA{R: 1})
+	}
+}
+
+func drawHellowWorld(d drivers.Displayer) {
+	tinyfont.WriteLine(d, &freemono.Regular9pt7b, 0, 32, "Hello World!", color.RGBA{R: 0xff, G: 0xff, B: 0xff, A: 0xff})
+}
+
+func assertEqualImages(t testing.TB, actual, expected image.Image) {
+
+	if actual.Bounds().Dx() != expected.Bounds().Dx() || actual.Bounds().Dy() != expected.Bounds().Dy() {
+		f := writeImage(actual)
+		t.Fatalf("differing size: was %v, expected %v, saved actual to %s", actual.Bounds(), expected.Bounds(), f)
+	}
+
+	bb := expected.Bounds()
+	for x := bb.Min.X; x < bb.Max.X; x++ {
+		for y := bb.Min.Y; y < bb.Max.Y; y++ {
+			actualBB := actual.Bounds()
+			if actual.At(x+actualBB.Min.X, y+actualBB.Min.Y) != expected.At(x, y) {
+				f := writeImage(actual)
+				t.Fatalf("different pixel at %d/%d: %v != %v, saved actual at %s", x, y, actual.At(x, y), expected.At(x, y), f)
+			}
+		}
+	}
+}
+
+func writeImage(img image.Image) string {
+
+	fn := fmt.Sprintf("%d.png", time.Now().Unix())
+	f, err := os.OpenFile(fn, os.O_RDWR|os.O_CREATE, 0644)
+	if err != nil {
+		panic(err)
+	}
+	defer f.Close()
+
+	err = png.Encode(f, img)
+	if err != nil {
+		panic(err)
+	}
+	return fn
+}

examples/adafruit4650/main.go

@@ -0,0 +1,42 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/adafruit4650"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/freemono"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	dev := adafruit4650.New(machine.I2C0)
+
+	err := dev.Configure()
+	if err != nil {
+		panic(err)
+	}
+
+	drawPlus(&dev)
+	drawHelloWorld(&dev)
+
+	err = dev.Display()
+	if err != nil {
+		panic(err)
+	}
+}
+
+func drawPlus(d drivers.Displayer) {
+	for i := int16(0); i < 128; i++ {
+		d.SetPixel(i, 32, color.RGBA{R: 1})
+	}
+	for i := int16(0); i < 64; i++ {
+		d.SetPixel(64, i, color.RGBA{R: 1})
+	}
+}
+
+func drawHelloWorld(d drivers.Displayer) {
+	tinyfont.WriteLine(d, &freemono.Regular9pt7b, 0, 32, "Hello World!", color.RGBA{R: 0xff, G: 0xff, B: 0xff, A: 0xff})
+}

smoketest.sh

@@ -5,6 +5,7 @@
 # get an md5sum).
 
 
+tinygo build -size short -o ./build/test.hex -target=feather-rp2040 ./examples/adafruit4650
 tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adt7410/main.go
 tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adxl345/main.go
 tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/amg88xx