tinygo-org/drivers
1
0
Fork 0
mirror of https://github.com/tinygo-org/drivers.git synced 2026-08-16 12:53:23 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

lora: move shared config for sx126x/sx127x to single package

Browse Source 
Signed-off-by: deadprogram <ron@hybridgroup.com>
This commit is contained in:
deadprogram
2022-12-23 11:05:51 +01:00
parent a421318a4d
commit d94003bd3a
11 changed files with 268 additions and 480 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/lora/sx127x/pingpong.go
-127
View File
@@ -1,127 +0,0 @@
// Receives data with LoRa.
package main
import (
"fmt"
"machine"
"strconv"
"strings"
"tinygo.org/x/drivers/lora/sx127x"
)
var loraConfig = sx127x.Config{
Frequency: 868100000,
SpreadingFactor: 12,
Bandwidth: 125000,
CodingRate: 6,
TxPower: 17,
}
const (
// Serial console
UART_TX_PIN = machine.PA9
UART_RX_PIN = machine.PA10
// RFM95 SPI Connection to Bluepill
SPI_SCK_PIN = machine.PA5
SPI_SDO_PIN = machine.PA7
SPI_SDI_PIN = machine.PA6
SPI_CS_PIN = machine.PB8
SPI_RST_PIN = machine.PB9
// DIO RFM95 Pin connection to BluePill
DIO0_PIN = machine.PA2
DIO0_PIN_MODE = machine.PinInputPulldown
DIO0_PIN_CHANGE = machine.PinRising
pollDelayMs int = 1000
)
// configureDioInt sets up the DIO0 interrupt handler
func configureDioInt(radio *sx127x.Device) {
// Set an interrupt on this pin.
err := DIO0_PIN.SetInterrupt(DIO0_PIN_CHANGE, func(machine.Pin) {
if DIO0_PIN.Get() {
radio.CheckIrq()
}
})
if err != nil {
println("could not configure pin interrupt:", err.Error())
}
}
func main() {
// Configure serial console
machine.Serial.Configure(machine.UARTConfig{TX: UART_TX_PIN, RX: UART_RX_PIN, BaudRate: 115200})
println("LoRa PingPong Example")
// Prepare GPIOS (SPI + DIO)
machine.LED.Configure(machine.PinConfig{Mode: machine.PinOutput})
SPI_CS_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
SPI_RST_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
DIO0_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
machine.LED.Set(true)
// Enable SPI
machine.SPI0.Configure(machine.SPIConfig{
SCK: SPI_SCK_PIN,
SDO: SPI_SDO_PIN,
SDI: SPI_SDI_PIN,
Frequency: 500000,
Mode: 0})
// Create and Reset Lora driver
loraRadio := sx127x.New(machine.SPI0, SPI_CS_PIN, SPI_RST_PIN)
loraRadio.Reset()
// Setup DIO0 interrupt Handling
configureDioInt(&loraRadio)
// Configure Lora settings (modulation, SF... etc )
var err = loraRadio.SetupLora(loraConfig)
if err != nil {
fmt.Println(err)
return
}
// ping counter is incremented after every retransmission
pingCount := 0
// Send first packet without using interrupts
println("*** Send a Lora PING ")
machine.LED.Set(false)
loraRadio.TxLora([]byte("PING " + strconv.Itoa(pingCount)))
machine.LED.Set(true)
println("*** Switch to RX Mode ")
for {
loraRadio.RxLora()
// Wait for Radio event
in := <-loraRadio.GetRadioEventChan()
// We have a packet
if in.EventType == sx127x.EventRxDone {
data := string(in.EventData)
println("RX: ", data)
machine.LED.Set(false)
// If it's ping, reply pong
if strings.Contains(data, "PING") {
println("Received PING, Sending PONG")
loraRadio.TxLora([]byte("PONG #" + strconv.Itoa(pingCount)))
} else if strings.Contains(data, "PONG") {
println("Received PONG, Sending PING")
loraRadio.TxLora([]byte("PING #" + strconv.Itoa(pingCount)))
}
machine.LED.Set(true)
pingCount++
}
}
}
examples/lora/sx127x/receiver.go
-50
View File
@@ -1,50 +0,0 @@
// Receives data with LoRa.
package main
import (
"fmt"
"machine"
"tinygo.org/x/drivers/lora/sx127x"
)
var loraConfig = sx127x.Config{
Frequency: 433998500,
SpreadingFactor: 7,
Bandwidth: 125000,
CodingRate: 6,
TxPower: 17,
}
var packet [255]byte
func main() {
println("LoRa Receiver Example")
// SPI settings for Feather M0 LoRa board
csPin := machine.PB1
csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
rstPin := machine.PB2
rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
dio0Pin := machine.PB3
dio0Pin.Configure(machine.PinConfig{Mode: machine.PinOutput})
machine.SPI0.Configure(machine.SPIConfig{})
loraRadio := sx127x.New(machine.SPI0, csPin, rstPin)
var err = loraRadio.SetupLora(loraConfig)
if err != nil {
fmt.Println(err)
return
}
println("Receiving LoRa packets...")
for {
packetSize := loraRadio.ParsePacket(0)
if packetSize > 0 {
println("Got packet, RSSI=", loraRadio.LastPacketRSSI())
size := loraRadio.ReadPacket(packet[:])
println(string(packet[:size]))
}
}
}
examples/lora/sx127x/sender.go
-88
View File
@@ -1,88 +0,0 @@
// Sends data with LoRa.
package main
import (
"fmt"
"machine"
"strconv"
"time"
"tinygo.org/x/drivers/lora/sx127x"
)
var loraConfig = sx127x.Config{
Frequency: 868100000,
SpreadingFactor: 12,
Bandwidth: 125000,
CodingRate: 6,
TxPower: 17,
}
const (
SPI_SCK_PIN = machine.PA5
SPI_SDO_PIN = machine.PA7
SPI_SDI_PIN = machine.PA6
SPI_CS_PIN = machine.PB8
SPI_RST_PIN = machine.PB9
DIO0_PIN = machine.PA2
UART_TX_PIN = machine.PA9
UART_RX_PIN = machine.PA10
)
func main() {
// Configure serial console
machine.Serial.Configure(machine.UARTConfig{TX: UART_TX_PIN, RX: UART_RX_PIN, BaudRate: 115200})
println("LoRa Sender Example")
// Prepare GPIOS (SPI + DIO)
machine.LED.Configure(machine.PinConfig{Mode: machine.PinOutput})
SPI_CS_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
SPI_RST_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
DIO0_PIN.Configure(machine.PinConfig{Mode: machine.PinOutput})
// Enable SPI
machine.SPI0.Configure(machine.SPIConfig{
SCK: SPI_SCK_PIN,
SDO: SPI_SDO_PIN,
SDI: SPI_SDI_PIN,
Frequency: 500000,
Mode: 0})
// Create and Reset Lora driver
loraRadio := sx127x.New(machine.SPI0, SPI_CS_PIN, SPI_RST_PIN)
loraRadio.Reset()
// Check module identification
if loraRadio.GetVersion() != 0x12 {
println("SX1276 module not found")
for {
}
} else {
println("Module version 0x12")
}
// Configure Lora settings (modulation, SF... etc )
var err = loraRadio.SetupLora(loraConfig)
if err != nil {
fmt.Println(err)
return
}
// Send a Lora packet every 5 sec
println("Sending LoRa packets every 5 seconds...")
for i := 0; ; i++ {
var packet = "TinyGo LoRa Sender: " + strconv.Itoa(i)
println("Sending:", packet)
machine.LED.Low()
time.Sleep(time.Millisecond * 150)
machine.LED.High()
loraRadio.TxLora([]byte(packet))
time.Sleep(5000 * time.Millisecond)
}
}
examples/sx126x/lora_continuous/lora_continuous.go
+10 -9
View File
@@ -7,6 +7,7 @@ import (
rfswitch "tinygo.org/x/drivers/examples/sx126x/rfswitch" rfswitch "tinygo.org/x/drivers/examples/sx126x/rfswitch"
"tinygo.org/x/drivers/lora"
"tinygo.org/x/drivers/sx126x" "tinygo.org/x/drivers/sx126x"
) )
@@ -36,17 +37,17 @@ func main() {
} }
// Prepare for Lora operation // Prepare for Lora operation
loraConf := sx126x.LoraConfig{ loraConf := lora.Config{
Freq: FREQ, Freq: FREQ,
Bw: sx126x.SX126X_LORA_BW_500_0, Bw: lora.Bandwidth_500_0,
Sf: sx126x.SX126X_LORA_SF9, Sf: lora.SpreadingFactor9,
Cr: sx126x.SX126X_LORA_CR_4_7, Cr: lora.CodingRate4_7,
HeaderType: sx126x.SX126X_LORA_HEADER_EXPLICIT, HeaderType: lora.HeaderExplicit,
Preamble: 12, Preamble: 12,
Ldr: sx126x.SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_OFF, Ldr: lora.LowDataRateOptimizeOff,
Iq: sx126x.SX126X_LORA_IQ_STANDARD, Iq: lora.IQStandard,
Crc: sx126x.SX126X_LORA_CRC_ON, Crc: lora.CRCOn,
SyncWord: sx126x.SX126X_LORA_MAC_PRIVATE_SYNCWORD, SyncWord: lora.SyncPrivate,
LoraTxPowerDBm: 14, LoraTxPowerDBm: 14,
} }
loraRadio.LoraConfig(loraConf) loraRadio.LoraConfig(loraConf)
examples/sx126x/lora_rxtx/lora_rxtx.go
+13 -15
View File
@@ -11,6 +11,7 @@ import (
rfswitch "tinygo.org/x/drivers/examples/sx126x/rfswitch" rfswitch "tinygo.org/x/drivers/examples/sx126x/rfswitch"
"tinygo.org/x/drivers/lora"
"tinygo.org/x/drivers/sx126x" "tinygo.org/x/drivers/sx126x"
) )
@@ -54,17 +55,17 @@ func main() {
intr := interrupt.New(stm32.IRQ_Radio_IRQ_Busy, radioIntHandler) intr := interrupt.New(stm32.IRQ_Radio_IRQ_Busy, radioIntHandler)
intr.Enable() intr.Enable()
loraConf := sx126x.LoraConfig{ loraConf := lora.Config{
Freq: FREQ, Freq: FREQ,
Bw: sx126x.SX126X_LORA_BW_500_0, Bw: lora.Bandwidth_500_0,
Sf: sx126x.SX126X_LORA_SF9, Sf: lora.SpreadingFactor9,
Cr: sx126x.SX126X_LORA_CR_4_7, Cr: lora.CodingRate4_7,
HeaderType: sx126x.SX126X_LORA_HEADER_EXPLICIT, HeaderType: lora.HeaderExplicit,
Preamble: 12, Preamble: 12,
Ldr: sx126x.SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_OFF, Ldr: lora.LowDataRateOptimizeOff,
Iq: sx126x.SX126X_LORA_IQ_STANDARD, Iq: lora.IQStandard,
Crc: sx126x.SX126X_LORA_CRC_ON, Crc: lora.CRCOn,
SyncWord: sx126x.SX126X_LORA_MAC_PRIVATE_SYNCWORD, SyncWord: lora.SyncPrivate,
LoraTxPowerDBm: 20, LoraTxPowerDBm: 20,
} }
@@ -74,20 +75,17 @@ func main() {
for { for {
tStart := time.Now() tStart := time.Now()
// Blocking RX for LORA_DEFAULT_RXTIMEOUT_MS println("main: Receiving Lora for 10 seconds")
println("Start Lora RX for 10 sec")
for int(time.Now().Sub(tStart).Seconds()) < 10 { for int(time.Now().Sub(tStart).Seconds()) < 10 {
buf, err := loraRadio.LoraRx(LORA_DEFAULT_RXTIMEOUT_MS) buf, err := loraRadio.LoraRx(LORA_DEFAULT_RXTIMEOUT_MS)
if err != nil { if err != nil {
println("RX Error: ", err) println("RX Error: ", err)
} else if buf != nil { } else if buf != nil {
println("Packet Received: len=", len(buf), string(buf)) println("Packet Received: len=", len(buf), string(buf))
} }
} }
println("END Lora RX") println("main: End Lora RX")
println("LORA TX size=", len(txmsg), " -> ", string(txmsg))
println("LORA TX size=", len(txmsg))
err := loraRadio.LoraTx(txmsg, LORA_DEFAULT_TXTIMEOUT_MS) err := loraRadio.LoraTx(txmsg, LORA_DEFAULT_TXTIMEOUT_MS)
if err != nil { if err != nil {
println("TX Error:", err) println("TX Error:", err)
examples/sx127x/lora_rxtx/lora_rxtx.go
+26 -40
View File
@@ -7,18 +7,20 @@ import (
"machine" "machine"
"time" "time"
"tinygo.org/x/drivers/lora"
"tinygo.org/x/drivers/sx127x" "tinygo.org/x/drivers/sx127x"
) )
const FREQ = 868100000
const ( const (
LORA_DEFAULT_RXTIMEOUT_MS = 1000 LORA_DEFAULT_RXTIMEOUT_MS = 1000
LORA_DEFAULT_TXTIMEOUT_MS = 5000 LORA_DEFAULT_TXTIMEOUT_MS = 5000
DIO_PIN_CHANGE = machine.PinRising
) )
var ( var (
loraRadio *sx127x.Device loraRadio *sx127x.Device
txmsg = []byte("Hello TinyGO")
// We assume the module is connected this way: // We assume the module is connected this way:
SX127X_PIN_RST = machine.PB9 SX127X_PIN_RST = machine.PB9
@@ -26,29 +28,15 @@ var (
SX127X_PIN_DIO0 = machine.PA0 SX127X_PIN_DIO0 = machine.PA0
SX127X_PIN_DIO1 = machine.PA1 SX127X_PIN_DIO1 = machine.PA1
SX127X_SPI = machine.SPI0 SX127X_SPI = machine.SPI0
txmsg = []byte("Hello TinyGO")
// Prepare for Lora Operation
loraConf = sx127x.LoraConfig{
Freq: 868100000,
Bw: sx127x.SX127X_LORA_BW_125_0,
Sf: sx127x.SX127X_LORA_SF9,
Cr: sx127x.SX127X_LORA_CR_4_7,
HeaderType: sx127x.SX127X_LORA_HEADER_EXPLICIT,
Preamble: 12,
Iq: sx127x.SX127X_LORA_IQ_STANDARD,
Crc: sx127x.SX127X_LORA_CRC_ON,
SyncWord: sx127x.SX127X_LORA_MAC_PUBLIC_SYNCWORD,
LoraTxPowerDBm: 20,
}
) )
func main() { func dioIrqHandler(machine.Pin) {
println("\n# TinyGo Driver SX127X RX/TX example") loraRadio.HandleInterrupt()
println("# ------------------------------------") }
println("main: configuring LED/SPI/DIO/IRQ") func main() {
println("\n# TinyGo Lora RX/TX test")
println("# ----------------------")
machine.LED.Configure(machine.PinConfig{Mode: machine.PinOutput}) machine.LED.Configure(machine.PinConfig{Mode: machine.PinOutput})
SX127X_PIN_RST.Configure(machine.PinConfig{Mode: machine.PinOutput}) SX127X_PIN_RST.Configure(machine.PinConfig{Mode: machine.PinOutput})
SX127X_PIN_CS.Configure(machine.PinConfig{Mode: machine.PinOutput}) SX127X_PIN_CS.Configure(machine.PinConfig{Mode: machine.PinOutput})
@@ -67,36 +55,34 @@ func main() {
} }
// Setup DIO0 interrupt Handling // Setup DIO0 interrupt Handling
err := SX127X_PIN_DIO0.SetInterrupt(DIO_PIN_CHANGE, func(machine.Pin) { if err := SX127X_PIN_DIO0.SetInterrupt(machine.PinRising, dioIrqHandler); err != nil {
if SX127X_PIN_DIO0.Get() {
loraRadio.HandleInterrupt()
}
})
if err != nil {
println("could not configure DIO0 pin interrupt:", err.Error()) println("could not configure DIO0 pin interrupt:", err.Error())
} }
// Setup DIO1 interrupt Handling // Setup DIO1 interrupt Handling
err = SX127X_PIN_DIO1.SetInterrupt(DIO_PIN_CHANGE, func(machine.Pin) { if err := SX127X_PIN_DIO1.SetInterrupt(machine.PinRising, dioIrqHandler); err != nil {
if SX127X_PIN_DIO1.Get() {
loraRadio.HandleInterrupt()
}
})
if err != nil {
println("could not configure DIO1 pin interrupt:", err.Error()) println("could not configure DIO1 pin interrupt:", err.Error())
} }
println("main: Configure lora modulation") // Prepare for Lora Operation
loraRadio.LoraConfig(loraConf) loraConf := lora.Config{
Freq: FREQ,
Bw: lora.Bandwidth_500_0,
Sf: lora.SpreadingFactor9,
Cr: lora.CodingRate4_7,
HeaderType: lora.HeaderExplicit,
Preamble: 12,
Iq: lora.IQStandard,
Crc: lora.CRCOn,
SyncWord: lora.SyncPrivate,
LoraTxPowerDBm: 20,
}
// Get uint32 from RSSI loraRadio.LoraConfig(loraConf)
rand32 := loraRadio.RandomU32()
println("main: Get random 32bit from RSSI:", rand32)
var count uint var count uint
for { for {
tStart := time.Now() tStart := time.Now()
machine.LED.Set(!machine.LED.Get())
println("main: Receiving Lora for 10 seconds") println("main: Receiving Lora for 10 seconds")
for int(time.Now().Sub(tStart).Seconds()) < 10 { for int(time.Now().Sub(tStart).Seconds()) < 10 {
lora/config.go
+78
View File
@@ -0,0 +1,78 @@
package lora
import "errors"
// Config holds the LoRa configuration parameters
type Config struct {
Freq uint32 // Frequency
Cr uint8 // Coding Rate
Sf uint8 // Spread Factor
Bw uint8 // Bandwidth
Ldr uint8 // Low Data Rate
Preamble uint16 // PreambleLength
SyncWord uint16 // Sync Word
HeaderType uint8 // Header : Implicit/explicit
Crc uint8 // CRC : Yes/No
Iq uint8 // iq : Standard/inverted
LoraTxPowerDBm int8 // Tx power in Dbm
}
var (
ErrUndefinedLoraConf = errors.New("Undefined Lora configuration")
)
const (
SpreadingFactor5 = 0x05
SpreadingFactor6 = 0x06
SpreadingFactor7 = 0x07
SpreadingFactor8 = 0x08
SpreadingFactor9 = 0x09
SpreadingFactor10 = 0x0A
SpreadingFactor11 = 0x0B
SpreadingFactor12 = 0x0C
)
const (
CodingRate4_5 = 0x01 // 7 0 LoRa coding rate: 4/5
CodingRate4_6 = 0x02 // 7 0 4/6
CodingRate4_7 = 0x03 // 7 0 4/7
CodingRate4_8 = 0x04 // 7 0 4/8
)
const (
HeaderExplicit = 0x00 // 7 0 LoRa header mode: explicit
HeaderImplicit = 0x01 // 7 0 implicit
)
const (
LowDataRateOptimizeOff = 0x00 // 7 0 LoRa low data rate optimization: disabled
LowDataRateOptimizeOn = 0x01 // 7 0 enabled
)
const (
CRCOff = 0x00 // 7 0 LoRa CRC mode: disabled
CRCOn = 0x01 // 7 0 enabled
)
const (
IQStandard = 0x00 // 7 0 LoRa IQ setup: standard
IQInverted = 0x01 // 7 0 inverted
)
const (
Bandwidth_7_8 = iota // 7.8 kHz
Bandwidth_10_4 // 10.4 kHz
Bandwidth_15_6 // 15.6 kHz
Bandwidth_20_8 // 20.8 kHz
Bandwidth_31_25 // 31.25 kHz
Bandwidth_41_7 // 41.7 kHz
Bandwidth_62_5 // 62.5 kHz
Bandwidth_125_0 // 125.0 kHz
Bandwidth_250_0 // 250.0 kHz
Bandwidth_500_0 // 500.0 kHz
)
const (
SyncPublic = iota
SyncPrivate
)
sx126x/registers.go
+36 -57
View File
@@ -206,48 +206,42 @@ const (
SX126X_PA_RAMP_3400U = 0x07 // 7 0 3400 us SX126X_PA_RAMP_3400U = 0x07 // 7 0 3400 us
//SX126X_CMD_SET_MODULATION_PARAMS //SX126X_CMD_SET_MODULATION_PARAMS
SX126X_GFSK_FILTER_NONE = 0x00 // 7 0 GFSK filter: none SX126X_GFSK_FILTER_NONE = 0x00 // 7 0 GFSK filter: none
SX126X_GFSK_FILTER_GAUSS_0_3 = 0x08 // 7 0 Gaussian, BT = 0.3 SX126X_GFSK_FILTER_GAUSS_0_3 = 0x08 // 7 0 Gaussian, BT = 0.3
SX126X_GFSK_FILTER_GAUSS_0_5 = 0x09 // 7 0 Gaussian, BT = 0.5 SX126X_GFSK_FILTER_GAUSS_0_5 = 0x09 // 7 0 Gaussian, BT = 0.5
SX126X_GFSK_FILTER_GAUSS_0_7 = 0x0A // 7 0 Gaussian, BT = 0.7 SX126X_GFSK_FILTER_GAUSS_0_7 = 0x0A // 7 0 Gaussian, BT = 0.7
SX126X_GFSK_FILTER_GAUSS_1 = 0x0B // 7 0 Gaussian, BT = 1 SX126X_GFSK_FILTER_GAUSS_1 = 0x0B // 7 0 Gaussian, BT = 1
SX126X_GFSK_RX_BW_4_8 = 0x1F // 7 0 GFSK Rx bandwidth: 4.8 kHz SX126X_GFSK_RX_BW_4_8 = 0x1F // 7 0 GFSK Rx bandwidth: 4.8 kHz
SX126X_GFSK_RX_BW_5_8 = 0x17 // 7 0 5.8 kHz SX126X_GFSK_RX_BW_5_8 = 0x17 // 7 0 5.8 kHz
SX126X_GFSK_RX_BW_7_3 = 0x0F // 7 0 7.3 kHz SX126X_GFSK_RX_BW_7_3 = 0x0F // 7 0 7.3 kHz
SX126X_GFSK_RX_BW_9_7 = 0x1E // 7 0 9.7 kHz SX126X_GFSK_RX_BW_9_7 = 0x1E // 7 0 9.7 kHz
SX126X_GFSK_RX_BW_11_7 = 0x16 // 7 0 11.7 kHz SX126X_GFSK_RX_BW_11_7 = 0x16 // 7 0 11.7 kHz
SX126X_GFSK_RX_BW_14_6 = 0x0E // 7 0 14.6 kHz SX126X_GFSK_RX_BW_14_6 = 0x0E // 7 0 14.6 kHz
SX126X_GFSK_RX_BW_19_5 = 0x1D // 7 0 19.5 kHz SX126X_GFSK_RX_BW_19_5 = 0x1D // 7 0 19.5 kHz
SX126X_GFSK_RX_BW_23_4 = 0x15 // 7 0 23.4 kHz SX126X_GFSK_RX_BW_23_4 = 0x15 // 7 0 23.4 kHz
SX126X_GFSK_RX_BW_29_3 = 0x0D // 7 0 29.3 kHz SX126X_GFSK_RX_BW_29_3 = 0x0D // 7 0 29.3 kHz
SX126X_GFSK_RX_BW_39_0 = 0x1C // 7 0 39.0 kHz SX126X_GFSK_RX_BW_39_0 = 0x1C // 7 0 39.0 kHz
SX126X_GFSK_RX_BW_46_9 = 0x14 // 7 0 46.9 kHz SX126X_GFSK_RX_BW_46_9 = 0x14 // 7 0 46.9 kHz
SX126X_GFSK_RX_BW_58_6 = 0x0C // 7 0 58.6 kHz SX126X_GFSK_RX_BW_58_6 = 0x0C // 7 0 58.6 kHz
SX126X_GFSK_RX_BW_78_2 = 0x1B // 7 0 78.2 kHz SX126X_GFSK_RX_BW_78_2 = 0x1B // 7 0 78.2 kHz
SX126X_GFSK_RX_BW_93_8 = 0x13 // 7 0 93.8 kHz SX126X_GFSK_RX_BW_93_8 = 0x13 // 7 0 93.8 kHz
SX126X_GFSK_RX_BW_117_3 = 0x0B // 7 0 117.3 kHz SX126X_GFSK_RX_BW_117_3 = 0x0B // 7 0 117.3 kHz
SX126X_GFSK_RX_BW_156_2 = 0x1A // 7 0 156.2 kHz SX126X_GFSK_RX_BW_156_2 = 0x1A // 7 0 156.2 kHz
SX126X_GFSK_RX_BW_187_2 = 0x12 // 7 0 187.2 kHz SX126X_GFSK_RX_BW_187_2 = 0x12 // 7 0 187.2 kHz
SX126X_GFSK_RX_BW_234_3 = 0x0A // 7 0 234.3 kHz SX126X_GFSK_RX_BW_234_3 = 0x0A // 7 0 234.3 kHz
SX126X_GFSK_RX_BW_312_0 = 0x19 // 7 0 312.0 kHz SX126X_GFSK_RX_BW_312_0 = 0x19 // 7 0 312.0 kHz
SX126X_GFSK_RX_BW_373_6 = 0x11 // 7 0 373.6 kHz SX126X_GFSK_RX_BW_373_6 = 0x11 // 7 0 373.6 kHz
SX126X_GFSK_RX_BW_467_0 = 0x09 // 7 0 467.0 kHz SX126X_GFSK_RX_BW_467_0 = 0x09 // 7 0 467.0 kHz
SX126X_LORA_BW_7_8 = 0x00 // 7 0 LoRa bandwidth: 7.8 kHz SX126X_LORA_BW_7_8 = 0x00 // 7 0 LoRa bandwidth: 7.8 kHz
SX126X_LORA_BW_10_4 = 0x08 // 7 0 10.4 kHz SX126X_LORA_BW_10_4 = 0x08 // 7 0 10.4 kHz
SX126X_LORA_BW_15_6 = 0x01 // 7 0 15.6 kHz SX126X_LORA_BW_15_6 = 0x01 // 7 0 15.6 kHz
SX126X_LORA_BW_20_8 = 0x09 // 7 0 20.8 kHz SX126X_LORA_BW_20_8 = 0x09 // 7 0 20.8 kHz
SX126X_LORA_BW_31_25 = 0x02 // 7 0 31.25 kHz SX126X_LORA_BW_31_25 = 0x02 // 7 0 31.25 kHz
SX126X_LORA_BW_41_7 = 0x0A // 7 0 41.7 kHz SX126X_LORA_BW_41_7 = 0x0A // 7 0 41.7 kHz
SX126X_LORA_BW_62_5 = 0x03 // 7 0 62.5 kHz SX126X_LORA_BW_62_5 = 0x03 // 7 0 62.5 kHz
SX126X_LORA_BW_125_0 = 0x04 // 7 0 125.0 kHz SX126X_LORA_BW_125_0 = 0x04 // 7 0 125.0 kHz
SX126X_LORA_BW_250_0 = 0x05 // 7 0 250.0 kHz SX126X_LORA_BW_250_0 = 0x05 // 7 0 250.0 kHz
SX126X_LORA_BW_500_0 = 0x06 // 7 0 500.0 kHz SX126X_LORA_BW_500_0 = 0x06 // 7 0 500.0 kHz
SX126X_LORA_CR_4_5 = 0x01 // 7 0 LoRa coding rate: 4/5
SX126X_LORA_CR_4_6 = 0x02 // 7 0 4/6
SX126X_LORA_CR_4_7 = 0x03 // 7 0 4/7
SX126X_LORA_CR_4_8 = 0x04 // 7 0 4/8
SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_OFF = 0x00 // 7 0 LoRa low data rate optimization: disabled
SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_ON = 0x01 // 7 0 enabled
//SX126X_CMD_SET_PACKET_PARAMS //SX126X_CMD_SET_PACKET_PARAMS
SX126X_GFSK_PREAMBLE_DETECT_OFF = 0x00 // 7 0 GFSK minimum preamble length before reception starts: detector disabled SX126X_GFSK_PREAMBLE_DETECT_OFF = 0x00 // 7 0 GFSK minimum preamble length before reception starts: detector disabled
@@ -267,12 +261,6 @@ const (
SX126X_GFSK_CRC_2_BYTE_INV = 0x06 // 7 0 2 byte, inverted SX126X_GFSK_CRC_2_BYTE_INV = 0x06 // 7 0 2 byte, inverted
SX126X_GFSK_WHITENING_OFF = 0x00 // 7 0 GFSK data whitening: disabled SX126X_GFSK_WHITENING_OFF = 0x00 // 7 0 GFSK data whitening: disabled
SX126X_GFSK_WHITENING_ON = 0x01 // 7 0 enabled SX126X_GFSK_WHITENING_ON = 0x01 // 7 0 enabled
SX126X_LORA_HEADER_EXPLICIT = 0x00 // 7 0 LoRa header mode: explicit
SX126X_LORA_HEADER_IMPLICIT = 0x01 // 7 0 implicit
SX126X_LORA_CRC_OFF = 0x00 // 7 0 LoRa CRC mode: disabled
SX126X_LORA_CRC_ON = 0x01 // 7 0 enabled
SX126X_LORA_IQ_STANDARD = 0x00 // 7 0 LoRa IQ setup: standard
SX126X_LORA_IQ_INVERTED = 0x01 // 7 0 inverted
//SX126X_CMD_SET_CAD_PARAMS //SX126X_CMD_SET_CAD_PARAMS
SX126X_CAD_ON_1_SYMB = 0x00 // 7 0 number of symbols used for CAD: 1 SX126X_CAD_ON_1_SYMB = 0x00 // 7 0 number of symbols used for CAD: 1
@@ -323,13 +311,4 @@ const (
SX126X_LORA_MAC_PUBLIC_SYNCWORD = 0x3444 SX126X_LORA_MAC_PUBLIC_SYNCWORD = 0x3444
SX126X_LORA_MAC_PRIVATE_SYNCWORD = 0x1424 SX126X_LORA_MAC_PRIVATE_SYNCWORD = 0x1424
SX126X_LORA_SF5 = 0x05
SX126X_LORA_SF6 = 0x06
SX126X_LORA_SF7 = 0x07
SX126X_LORA_SF8 = 0x08
SX126X_LORA_SF9 = 0x09
SX126X_LORA_SF10 = 0x0A
SX126X_LORA_SF11 = 0x0B
SX126X_LORA_SF12 = 0x0C
) )
sx126x/sx126x.go
+51 -34
View File
@@ -8,6 +8,7 @@ import (
"time" "time"
"tinygo.org/x/drivers" "tinygo.org/x/drivers"
"tinygo.org/x/drivers/lora"
) )
// SX126X radio transceiver RF_IN and RF_OUT may be connected // SX126X radio transceiver RF_IN and RF_OUT may be connected
@@ -55,36 +56,17 @@ const (
type Device struct { type Device struct {
spi drivers.SPI // SPI bus for module communication spi drivers.SPI // SPI bus for module communication
radioEventChan chan RadioEvent // Channel for Receiving events radioEventChan chan RadioEvent // Channel for Receiving events
loraConf LoraConfig // Current Lora configuration loraConf lora.Config // Current Lora configuration
rfswitch RFSwitch // RF Switch, if any rfswitch RFSwitch // RF Switch, if any
deepSleep bool // Internal Sleep state deepSleep bool // Internal Sleep state
deviceType int // sx1261,sx1262,sx1268 (defaults sx1261) deviceType int // sx1261,sx1262,sx1268 (defaults sx1261)
spiBuffer [SPI_BUFFER_SIZE]uint8 spiBuffer [SPI_BUFFER_SIZE]uint8
} }
// Config holds the LoRa configuration parameters
type LoraConfig struct {
Freq uint32 // Frequency
Cr uint8 // Coding Rate
Sf uint8 // Spread Factor
Bw uint8 // Bandwidth
Ldr uint8 // Low Data Rate
Preamble uint16 // PreambleLength
SyncWord uint16 // Sync Word
HeaderType uint8 // Header : Implicit/explicit
Crc uint8 // CRC : Yes/No
Iq uint8 // iq : Standard/inverted
LoraTxPowerDBm int8 // Tx power in Dbm
}
const ( const (
SX126X_RTC_FREQ_IN_HZ uint32 = 64000 SX126X_RTC_FREQ_IN_HZ uint32 = 64000
) )
var (
errUndefinedLoraConf = errors.New("Undefined Lora configuration")
)
// -------------------------------------------------- // --------------------------------------------------
// Helper functions // Helper functions
// -------------------------------------------------- // --------------------------------------------------
@@ -387,11 +369,11 @@ func (d *Device) SetPacketType(packetType uint8) {
} }
// SetSyncWord defines the Sync Word to yse // SetSyncWord defines the Sync Word to yse
func (d *Device) SetSyncWord(syncword uint16) { func (d *Device) SetSyncWord(sw uint16) {
var p [2]uint8 var p [2]uint8
d.loraConf.SyncWord = syncword d.loraConf.SyncWord = sw
p[0] = uint8((syncword >> 8) & 0xFF) p[0] = uint8((d.loraConf.SyncWord >> 8) & 0xFF)
p[1] = uint8((syncword >> 0) & 0xFF) p[1] = uint8((d.loraConf.SyncWord >> 0) & 0xFF)
d.WriteRegister(SX126X_REG_LORA_SYNC_WORD_MSB, p[:]) d.WriteRegister(SX126X_REG_LORA_SYNC_WORD_MSB, p[:])
} }
@@ -547,9 +529,9 @@ func (d *Device) SetLoraFrequency(freq uint32) {
// NB: Change will be applied at next RX / TX // NB: Change will be applied at next RX / TX
func (d *Device) SetLoraIqMode(mode uint8) { func (d *Device) SetLoraIqMode(mode uint8) {
if mode == 0 { if mode == 0 {
d.loraConf.Iq = SX126X_LORA_IQ_STANDARD d.loraConf.Iq = lora.IQStandard
} else { } else {
d.loraConf.Iq = SX126X_LORA_IQ_INVERTED d.loraConf.Iq = lora.IQInverted
} }
} }
@@ -569,9 +551,9 @@ func (d *Device) SetLoraBandwidth(bw uint8) {
// NB: Change will be applied at next RX / TX // NB: Change will be applied at next RX / TX
func (d *Device) SetLoraCrc(enable bool) { func (d *Device) SetLoraCrc(enable bool) {
if enable { if enable {
d.loraConf.Crc = SX126X_LORA_CRC_ON d.loraConf.Crc = lora.CRCOn
} else { } else {
d.loraConf.Crc = SX126X_LORA_CRC_OFF d.loraConf.Crc = lora.CRCOn
} }
} }
@@ -587,9 +569,10 @@ func (d *Device) SetLoraSpreadingFactor(sf uint8) {
// //
// LoraConfig() defines Lora configuration for next Lora operations // LoraConfig() defines Lora configuration for next Lora operations
func (d *Device) LoraConfig(cnf LoraConfig) { func (d *Device) LoraConfig(cnf lora.Config) {
// Save given configuration // Save given configuration
d.loraConf = cnf d.loraConf = cnf
d.loraConf.SyncWord = syncword(int(cnf.SyncWord))
// Switch to standby prior to configuration changes // Switch to standby prior to configuration changes
d.SetStandby() d.SetStandby()
// Clear errors, disable radio interrupts for the moment // Clear errors, disable radio interrupts for the moment
@@ -599,7 +582,7 @@ func (d *Device) LoraConfig(cnf LoraConfig) {
// Define radio operation mode // Define radio operation mode
d.SetPacketType(SX126X_PACKET_TYPE_LORA) d.SetPacketType(SX126X_PACKET_TYPE_LORA)
d.SetRfFrequency(d.loraConf.Freq) d.SetRfFrequency(d.loraConf.Freq)
d.SetModulationParams(d.loraConf.Sf, d.loraConf.Bw, d.loraConf.Cr, d.loraConf.Ldr) d.SetModulationParams(d.loraConf.Sf, bandwidth(d.loraConf.Bw), d.loraConf.Cr, d.loraConf.Ldr)
d.SetTxParams(d.loraConf.LoraTxPowerDBm, SX126X_PA_RAMP_200U) d.SetTxParams(d.loraConf.LoraTxPowerDBm, SX126X_PA_RAMP_200U)
d.SetSyncWord(d.loraConf.SyncWord) d.SetSyncWord(d.loraConf.SyncWord)
d.SetBufferBaseAddress(0, 0) d.SetBufferBaseAddress(0, 0)
@@ -609,7 +592,7 @@ func (d *Device) LoraConfig(cnf LoraConfig) {
func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error { func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error {
if d.loraConf.Freq == 0 { if d.loraConf.Freq == 0 {
return errUndefinedLoraConf return lora.ErrUndefinedLoraConf
} }
if d.rfswitch != nil { if d.rfswitch != nil {
err := d.rfswitch.SetRfSwitchMode(RFSWITCH_TX_HP) err := d.rfswitch.SetRfSwitchMode(RFSWITCH_TX_HP)
@@ -625,7 +608,7 @@ func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error {
d.SetTxParams(d.loraConf.LoraTxPowerDBm, SX126X_PA_RAMP_200U) d.SetTxParams(d.loraConf.LoraTxPowerDBm, SX126X_PA_RAMP_200U)
d.SetBufferBaseAddress(0, 0) d.SetBufferBaseAddress(0, 0)
d.WriteBuffer(pkt) d.WriteBuffer(pkt)
d.SetModulationParams(d.loraConf.Sf, d.loraConf.Bw, d.loraConf.Cr, d.loraConf.Ldr) d.SetModulationParams(d.loraConf.Sf, bandwidth(d.loraConf.Bw), d.loraConf.Cr, d.loraConf.Ldr)
d.SetPacketParam(d.loraConf.Preamble, d.loraConf.HeaderType, d.loraConf.Crc, uint8(len(pkt)), d.loraConf.Iq) d.SetPacketParam(d.loraConf.Preamble, d.loraConf.HeaderType, d.loraConf.Crc, uint8(len(pkt)), d.loraConf.Iq)
d.SetDioIrqParams(irqVal, irqVal, SX126X_IRQ_NONE, SX126X_IRQ_NONE) d.SetDioIrqParams(irqVal, irqVal, SX126X_IRQ_NONE, SX126X_IRQ_NONE)
d.SetSyncWord(d.loraConf.SyncWord) d.SetSyncWord(d.loraConf.SyncWord)
@@ -642,7 +625,7 @@ func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error {
func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) { func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) {
if d.loraConf.Freq == 0 { if d.loraConf.Freq == 0 {
return nil, errUndefinedLoraConf return nil, lora.ErrUndefinedLoraConf
} }
if d.rfswitch != nil { if d.rfswitch != nil {
err := d.rfswitch.SetRfSwitchMode(RFSWITCH_RX) err := d.rfswitch.SetRfSwitchMode(RFSWITCH_RX)
@@ -654,7 +637,7 @@ func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) {
irqVal := uint16(SX126X_IRQ_RX_DONE | SX126X_IRQ_TIMEOUT | SX126X_IRQ_CRC_ERR) irqVal := uint16(SX126X_IRQ_RX_DONE | SX126X_IRQ_TIMEOUT | SX126X_IRQ_CRC_ERR)
d.SetStandby() d.SetStandby()
d.SetBufferBaseAddress(0, 0) d.SetBufferBaseAddress(0, 0)
d.SetModulationParams(d.loraConf.Sf, d.loraConf.Bw, d.loraConf.Cr, d.loraConf.Ldr) d.SetModulationParams(d.loraConf.Sf, bandwidth(d.loraConf.Bw), d.loraConf.Cr, d.loraConf.Ldr)
d.SetPacketParam(d.loraConf.Preamble, d.loraConf.HeaderType, d.loraConf.Crc, 0xFF, d.loraConf.Iq) d.SetPacketParam(d.loraConf.Preamble, d.loraConf.HeaderType, d.loraConf.Crc, 0xFF, d.loraConf.Iq)
d.SetDioIrqParams(irqVal, irqVal, SX126X_IRQ_NONE, SX126X_IRQ_NONE) d.SetDioIrqParams(irqVal, irqVal, SX126X_IRQ_NONE, SX126X_IRQ_NONE)
d.SetRx(timeoutMsToRtcSteps(timeoutMs)) d.SetRx(timeoutMsToRtcSteps(timeoutMs))
@@ -699,3 +682,37 @@ func (d *Device) HandleInterrupt() {
} }
} }
func bandwidth(bw uint8) uint8 {
switch bw {
case lora.Bandwidth_7_8:
return SX126X_LORA_BW_7_8
case lora.Bandwidth_10_4:
return SX126X_LORA_BW_10_4
case lora.Bandwidth_15_6:
return SX126X_LORA_BW_15_6
case lora.Bandwidth_20_8:
return SX126X_LORA_BW_20_8
case lora.Bandwidth_31_25:
return SX126X_LORA_BW_31_25
case lora.Bandwidth_41_7:
return SX126X_LORA_BW_41_7
case lora.Bandwidth_62_5:
return SX126X_LORA_BW_62_5
case lora.Bandwidth_125_0:
return SX126X_LORA_BW_125_0
case lora.Bandwidth_250_0:
return SX126X_LORA_BW_250_0
case lora.Bandwidth_500_0:
return SX126X_LORA_BW_500_0
default:
return 0
}
}
func syncword(sw int) uint16 {
if sw == lora.SyncPublic {
return SX126X_LORA_MAC_PUBLIC_SYNCWORD
}
return SX126X_LORA_MAC_PRIVATE_SYNCWORD
}
sx127x/registers.go
-25
View File
@@ -70,20 +70,6 @@ const (
SX127X_LNA_OFF_GAIN = uint8(0x00) SX127X_LNA_OFF_GAIN = uint8(0x00)
SX127X_LNA_LOW_GAIN = uint8(0x20) SX127X_LNA_LOW_GAIN = uint8(0x20)
// Header type
SX127X_LORA_HEADER_EXPLICIT = uint8(0x00)
SX127X_LORA_HEADER_IMPLICIT = uint8(0x01)
// CRC
SX127X_LORA_CRC_OFF = uint8(0x00)
SX127X_LORA_CRC_ON = uint8(0x01)
// IQ Polarity
SX127X_LORA_IQ_STANDARD = uint8(0x00)
SX127X_LORA_IQ_INVERTED = uint8(0x01)
// Coding Rate
SX127X_LORA_CR_4_5 = uint8(0x01)
SX127X_LORA_CR_4_6 = uint8(0x02)
SX127X_LORA_CR_4_7 = uint8(0x03)
SX127X_LORA_CR_4_8 = uint8(0x04)
// Bandwidth // Bandwidth
SX127X_LORA_BW_7_8 = uint8(0x00) SX127X_LORA_BW_7_8 = uint8(0x00)
SX127X_LORA_BW_10_4 = uint8(0x01) SX127X_LORA_BW_10_4 = uint8(0x01)
@@ -95,17 +81,6 @@ const (
SX127X_LORA_BW_125_0 = uint8(0x07) SX127X_LORA_BW_125_0 = uint8(0x07)
SX127X_LORA_BW_250_0 = uint8(0x08) SX127X_LORA_BW_250_0 = uint8(0x08)
SX127X_LORA_BW_500_0 = uint8(0x09) SX127X_LORA_BW_500_0 = uint8(0x09)
// Spreading factor
SX127X_LORA_SF6 = uint8(0x06)
SX127X_LORA_SF7 = uint8(0x07)
SX127X_LORA_SF8 = uint8(0x08)
SX127X_LORA_SF9 = uint8(0x09)
SX127X_LORA_SF10 = uint8(0x0A)
SX127X_LORA_SF11 = uint8(0x0B)
SX127X_LORA_SF12 = uint8(0x0C)
// Optim Low DR
SX127X_LOW_DATARATE_OPTIM_OFF = uint8(0x00)
SX127X_LOW_DATARATE_OPTIM_ON = uint8(0x01)
// Automatic gain control // Automatic gain control
SX127X_AGC_AUTO_OFF = uint8(0x00) SX127X_AGC_AUTO_OFF = uint8(0x00)
SX127X_AGC_AUTO_ON = uint8(0x01) SX127X_AGC_AUTO_ON = uint8(0x01)
sx127x/sx127x.go
+54 -35
View File
@@ -10,6 +10,7 @@ import (
"time" "time"
"tinygo.org/x/drivers" "tinygo.org/x/drivers"
"tinygo.org/x/drivers/lora"
) )
const ( const (
@@ -38,36 +39,19 @@ type Device struct {
spi drivers.SPI // SPI bus for module communication spi drivers.SPI // SPI bus for module communication
rstPin, csPin machine.Pin // GPIOs for reset and chip select rstPin, csPin machine.Pin // GPIOs for reset and chip select
radioEventChan chan RadioEvent // Channel for Receiving events radioEventChan chan RadioEvent // Channel for Receiving events
loraConf LoraConfig // Current Lora configuration loraConf lora.Config // Current Lora configuration
deepSleep bool // Internal Sleep state deepSleep bool // Internal Sleep state
deviceType int // sx1261,sx1262,sx1268 (defaults sx1261) deviceType int // sx1261,sx1262,sx1268 (defaults sx1261)
spiBuffer [SPI_BUFFER_SIZE]uint8 spiBuffer [SPI_BUFFER_SIZE]uint8
packetIndex uint8 // FIXME ... useless ? packetIndex uint8 // FIXME ... useless ?
} }
// Config holds the LoRa configuration parameters
type LoraConfig struct {
Freq uint32 // Frequency
Cr uint8 // Coding Rate
Sf uint8 // Spread Factor
Bw uint8 // Bandwidth
Ldr uint8 // Low Data Rate
Preamble uint16 // PreambleLength
SyncWord uint16 // Sync Word
HeaderType uint8 // Header : Implicit/explicit
Crc uint8 // CRC : Yes/No
Iq uint8 // iq : Standard/inverted
LoraTxPowerDBm int8 // Tx power in Dbm
}
var (
errUndefinedLoraConf = errors.New("Undefined Lora configuration")
)
// -------------------------------------------------- // --------------------------------------------------
// Channel and events //
// Channel and events
//
// -------------------------------------------------- // --------------------------------------------------
//NewRadioEvent() returns a new RadioEvent that can be used in the RadioChannel // NewRadioEvent() returns a new RadioEvent that can be used in the RadioChannel
func NewRadioEvent(eType int, irqStatus uint8, eData []byte) RadioEvent { func NewRadioEvent(eType int, irqStatus uint8, eData []byte) RadioEvent {
r := RadioEvent{EventType: eType, IRQStatus: irqStatus, EventData: eData} r := RadioEvent{EventType: eType, IRQStatus: irqStatus, EventData: eData}
return r return r
@@ -135,7 +119,7 @@ func (d *Device) SetOpModeLora() {
d.WriteRegister(SX127X_REG_OP_MODE, SX127X_OPMODE_LORA) d.WriteRegister(SX127X_REG_OP_MODE, SX127X_OPMODE_LORA)
} }
//GetVersion returns hardware version of sx1276 chipset // GetVersion returns hardware version of sx1276 chipset
func (d *Device) GetVersion() uint8 { func (d *Device) GetVersion() uint8 {
return (d.ReadRegister(SX127X_REG_VERSION)) return (d.ReadRegister(SX127X_REG_VERSION))
} }
@@ -245,7 +229,7 @@ func (d *Device) SetAgcAuto(val uint8) {
// SetLowDataRateOptimize enables Low Data Rate Optimization // SetLowDataRateOptimize enables Low Data Rate Optimization
func (d *Device) SetLowDataRateOptim(val uint8) { func (d *Device) SetLowDataRateOptim(val uint8) {
if val == SX127X_LOW_DATARATE_OPTIM_ON { if val == lora.LowDataRateOptimizeOn {
d.WriteRegister(SX127X_REG_MODEM_CONFIG_3, d.ReadRegister(SX127X_REG_MODEM_CONFIG_3)|0x08) d.WriteRegister(SX127X_REG_MODEM_CONFIG_3, d.ReadRegister(SX127X_REG_MODEM_CONFIG_3)|0x08)
} else { } else {
d.WriteRegister(SX127X_REG_MODEM_CONFIG_3, d.ReadRegister(SX127X_REG_MODEM_CONFIG_3)&0xf7) d.WriteRegister(SX127X_REG_MODEM_CONFIG_3, d.ReadRegister(SX127X_REG_MODEM_CONFIG_3)&0xf7)
@@ -271,9 +255,10 @@ func (d *Device) SetHopPeriod(val uint8) {
// //
// LoraConfig() defines Lora configuration for next Lora operations // LoraConfig() defines Lora configuration for next Lora operations
func (d *Device) LoraConfig(cnf LoraConfig) { func (d *Device) LoraConfig(cnf lora.Config) {
// Save given configuration // Save given configuration
d.loraConf = cnf d.loraConf = cnf
d.loraConf.SyncWord = syncword(int(cnf.SyncWord))
} }
// SetLoraFrequency updates the frequency the LoRa module is using // SetLoraFrequency updates the frequency the LoRa module is using
@@ -287,7 +272,7 @@ func (d *Device) SetLoraFrequency(frequency uint32) {
// SetBandwidth updates the bandwidth the LoRa module is using // SetBandwidth updates the bandwidth the LoRa module is using
func (d *Device) SetLoraBandwidth(bw uint8) { func (d *Device) SetLoraBandwidth(bw uint8) {
d.loraConf.Bw = bw d.loraConf.Bw = bandwidth(bw)
d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, (d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)&0x0f)|(bw<<4)) d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, (d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)&0x0f)|(bw<<4))
} }
@@ -300,7 +285,7 @@ func (d *Device) SetLoraCodingRate(cr uint8) {
// SetImplicitHeaderModeOn Enables implicit header mode *** // SetImplicitHeaderModeOn Enables implicit header mode ***
func (d *Device) SetLoraHeaderMode(headerType uint8) { func (d *Device) SetLoraHeaderMode(headerType uint8) {
d.loraConf.HeaderType = headerType d.loraConf.HeaderType = headerType
if headerType == SX127X_LORA_HEADER_IMPLICIT { if headerType == lora.HeaderExplicit {
d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)|0x01) d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)|0x01)
} else { } else {
d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)&0xfe) d.WriteRegister(SX127X_REG_MODEM_CONFIG_1, d.ReadRegister(SX127X_REG_MODEM_CONFIG_1)&0xfe)
@@ -310,7 +295,7 @@ func (d *Device) SetLoraHeaderMode(headerType uint8) {
// SetLoraSpreadingFactor changes spreading factor // SetLoraSpreadingFactor changes spreading factor
func (d *Device) SetLoraSpreadingFactor(sf uint8) { func (d *Device) SetLoraSpreadingFactor(sf uint8) {
d.loraConf.Sf = sf d.loraConf.Sf = sf
if sf == SX127X_LORA_SF6 { if sf == lora.SpreadingFactor6 {
d.WriteRegister(SX127X_REG_DETECTION_OPTIMIZE, 0xc5) d.WriteRegister(SX127X_REG_DETECTION_OPTIMIZE, 0xc5)
d.WriteRegister(SX127X_REG_DETECTION_THRESHOLD, 0x0c) d.WriteRegister(SX127X_REG_DETECTION_THRESHOLD, 0x0c)
} else { } else {
@@ -333,10 +318,10 @@ func (d *Device) SetTxContinuousMode(val bool) {
// SetLoraCrc Enable CRC generation and check on payload // SetLoraCrc Enable CRC generation and check on payload
func (d *Device) SetLoraCrc(enable bool) { func (d *Device) SetLoraCrc(enable bool) {
if enable { if enable {
d.loraConf.Crc = SX127X_LORA_CRC_ON d.loraConf.Crc = lora.CRCOn
d.WriteRegister(SX127X_REG_MODEM_CONFIG_2, d.ReadRegister(SX127X_REG_MODEM_CONFIG_2)|0x04) d.WriteRegister(SX127X_REG_MODEM_CONFIG_2, d.ReadRegister(SX127X_REG_MODEM_CONFIG_2)|0x04)
} else { } else {
d.loraConf.Crc = SX127X_LORA_CRC_OFF d.loraConf.Crc = lora.CRCOff
d.WriteRegister(SX127X_REG_MODEM_CONFIG_2, d.ReadRegister(SX127X_REG_MODEM_CONFIG_2)&0xfb) d.WriteRegister(SX127X_REG_MODEM_CONFIG_2, d.ReadRegister(SX127X_REG_MODEM_CONFIG_2)&0xfb)
} }
} }
@@ -347,7 +332,7 @@ func (d *Device) SetLoraPreamble(pLen uint16) {
d.WriteRegister(SX127X_REG_PREAMBLE_LSB, uint8(pLen&0xFF)) d.WriteRegister(SX127X_REG_PREAMBLE_LSB, uint8(pLen&0xFF))
} }
//SetLoraSyncWord defines sync word // SetLoraSyncWord defines sync word
func (d *Device) SetLoraSyncWord(syncWord uint16) { func (d *Device) SetLoraSyncWord(syncWord uint16) {
d.loraConf.SyncWord = syncWord d.loraConf.SyncWord = syncWord
sw := uint8(syncWord & 0xFF) sw := uint8(syncWord & 0xFF)
@@ -357,7 +342,7 @@ func (d *Device) SetLoraSyncWord(syncWord uint16) {
// SetLoraIQMode Sets I/Q polarity configuration // SetLoraIQMode Sets I/Q polarity configuration
func (d *Device) SetLoraIqMode(val uint8) { func (d *Device) SetLoraIqMode(val uint8) {
d.loraConf.Iq = val d.loraConf.Iq = val
if val == SX127X_LORA_IQ_STANDARD { if val == lora.IQStandard {
//Set IQ to normal values //Set IQ to normal values
d.WriteRegister(SX127X_REG_INVERTIQ, 0x27) d.WriteRegister(SX127X_REG_INVERTIQ, 0x27)
d.WriteRegister(SX127X_REG_INVERTIQ2, 0x1D) d.WriteRegister(SX127X_REG_INVERTIQ2, 0x1D)
@@ -387,7 +372,7 @@ func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error {
d.SetLoraSpreadingFactor(d.loraConf.Sf) d.SetLoraSpreadingFactor(d.loraConf.Sf)
d.SetLoraIqMode(d.loraConf.Iq) d.SetLoraIqMode(d.loraConf.Iq)
d.SetLoraCodingRate(d.loraConf.Cr) d.SetLoraCodingRate(d.loraConf.Cr)
d.SetLoraCrc(d.loraConf.Crc == SX127X_LORA_CRC_ON) d.SetLoraCrc(d.loraConf.Crc == lora.CRCOn)
d.SetTxPower(d.loraConf.LoraTxPowerDBm, true) d.SetTxPower(d.loraConf.LoraTxPowerDBm, true)
d.SetLoraHeaderMode(d.loraConf.HeaderType) d.SetLoraHeaderMode(d.loraConf.HeaderType)
d.SetAgcAuto(SX127X_AGC_AUTO_ON) d.SetAgcAuto(SX127X_AGC_AUTO_ON)
@@ -426,7 +411,7 @@ func (d *Device) LoraTx(pkt []uint8, timeoutMs uint32) error {
func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) { func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) {
if d.loraConf.Freq == 0 { if d.loraConf.Freq == 0 {
return nil, errUndefinedLoraConf return nil, lora.ErrUndefinedLoraConf
} }
d.SetOpModeLora() d.SetOpModeLora()
@@ -444,7 +429,7 @@ func (d *Device) LoraRx(timeoutMs uint32) ([]uint8, error) {
d.SetLoraSpreadingFactor(d.loraConf.Sf) // OK d.SetLoraSpreadingFactor(d.loraConf.Sf) // OK
d.SetLoraIqMode(d.loraConf.Iq) //OK d.SetLoraIqMode(d.loraConf.Iq) //OK
d.SetLoraCodingRate(d.loraConf.Cr) d.SetLoraCodingRate(d.loraConf.Cr)
d.SetLoraCrc(d.loraConf.Crc == SX127X_LORA_CRC_ON) d.SetLoraCrc(d.loraConf.Crc == lora.CRCOn)
d.SetTxPower(d.loraConf.LoraTxPowerDBm, true) d.SetTxPower(d.loraConf.LoraTxPowerDBm, true)
d.SetLoraHeaderMode(d.loraConf.HeaderType) d.SetLoraHeaderMode(d.loraConf.HeaderType)
d.SetAgcAuto(SX127X_AGC_AUTO_ON) d.SetAgcAuto(SX127X_AGC_AUTO_ON)
@@ -534,3 +519,37 @@ func (d *Device) HandleInterrupt() {
rChan <- NewRadioEvent(RadioEventCrcError, st, nil) rChan <- NewRadioEvent(RadioEventCrcError, st, nil)
} }
} }
func bandwidth(bw uint8) uint8 {
switch bw {
case lora.Bandwidth_7_8:
return SX127X_LORA_BW_7_8
case lora.Bandwidth_10_4:
return SX127X_LORA_BW_10_4
case lora.Bandwidth_15_6:
return SX127X_LORA_BW_15_6
case lora.Bandwidth_20_8:
return SX127X_LORA_BW_20_8
case lora.Bandwidth_31_25:
return SX127X_LORA_BW_31_25
case lora.Bandwidth_41_7:
return SX127X_LORA_BW_41_7
case lora.Bandwidth_62_5:
return SX127X_LORA_BW_62_5
case lora.Bandwidth_125_0:
return SX127X_LORA_BW_125_0
case lora.Bandwidth_250_0:
return SX127X_LORA_BW_250_0
case lora.Bandwidth_500_0:
return SX127X_LORA_BW_500_0
default:
return 0
}
}
func syncword(sw int) uint16 {
if sw == lora.SyncPublic {
return SX127X_LORA_MAC_PUBLIC_SYNCWORD
}
return SX127X_LORA_MAC_PRIVATE_SYNCWORD
}