aht20: add device

aht20/aht20_test.go

@@ -0,0 +1,74 @@
+package aht20
+
+import (
+	"testing"
+
+	qt "github.com/frankban/quicktest"
+	"tinygo.org/x/drivers/tester"
+)
+
+func TestDefaultI2CAddress(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	dev := New(bus)
+	c.Assert(uint8(dev.Address), qt.Equals, uint8(Address))
+}
+
+func TestInitialization(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fdev := tester.NewI2CDeviceCmd(c, Address)
+	fdev.Commands = defaultCommands()
+	bus.AddDevice(fdev)
+
+	// Set status to uninitialized to force initialization
+	fdev.Commands[CMD_STATUS].Response[0] = 0x0C
+
+	dev := New(bus)
+	dev.Configure()
+
+	// Check initialization command invoked
+	c.Assert(fdev.Commands[CMD_INITIALIZE].Invocations > 0, qt.Equals, true)
+}
+
+func TestRead(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fdev := tester.NewI2CDeviceCmd(c, Address)
+	fdev.Commands = defaultCommands()
+	bus.AddDevice(fdev)
+
+	dev := New(bus)
+	dev.Read()
+
+	// Should be 25deg (250 decidegrees)
+	c.Assert(dev.DeciCelsius(), qt.Equals, int32(250))
+
+	// Should be 36.3% (363 decipercent)
+	c.Assert(dev.DeciRelHumidity(), qt.Equals, int32(363))
+}
+
+func defaultCommands() map[uint8]*tester.Cmd {
+	return map[uint8]*tester.Cmd{
+		CMD_INITIALIZE: {
+			Command:  []byte{0xBE},
+			Mask:     []byte{0xFF},
+			Response: []byte{},
+		},
+		CMD_TRIGGER: {
+			Command:  []byte{0xAC, 0x33, 0x00},
+			Mask:     []byte{0xFF, 0xFF, 0xFF},
+			Response: []byte{0x1C, 0x5D, 0x10, 0x66, 0x01, 0xD2, 0x93},
+		},
+		CMD_SOFTRESET: {
+			Command:  []byte{0xBA},
+			Mask:     []byte{0xFF},
+			Response: []byte{},
+		},
+		CMD_STATUS: {
+			Command:  []byte{0x71},
+			Mask:     []byte{0xFF},
+			Response: []byte{0x1C},
+		},
+	}
+}