diff --git a/examples/ssd1306/i2c_128x64/main.go b/examples/ssd1306/i2c_128x64/main.go
new file mode 100644
index 0000000..a17010d
--- /dev/null
+++ b/examples/ssd1306/i2c_128x64/main.go
@@ -0,0 +1,60 @@
+// This example shows how to use 128x64 display over I2C
+// Tested on Seeeduino XIAO Expansion Board https://wiki.seeedstudio.com/Seeeduino-XIAO-Expansion-Board/
+//
+// According to manual, I2C address of the display is 0x78, but that's 8-bit address.
+// TinyGo operates on 7-bit addresses and respective 7-bit address would be 0x3C, which we use below.
+//
+// To learn more about different types of I2C addresses, please see following page
+// https://www.totalphase.com/support/articles/200349176-7-bit-8-bit-and-10-bit-I2C-Slave-Addressing
+
+package main
+
+import (
+	"machine"
+
+	"image/color"
+	"time"
+
+	"tinygo.org/x/drivers/ssd1306"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	display := ssd1306.NewI2C(machine.I2C0)
+	display.Configure(ssd1306.Config{
+		Address: 0x3C,
+		Width:   128,
+		Height:  64,
+	})
+
+	display.ClearDisplay()
+
+	x := int16(0)
+	y := int16(0)
+	deltaX := int16(1)
+	deltaY := int16(1)
+	for {
+		pixel := display.GetPixel(x, y)
+		c := color.RGBA{255, 255, 255, 255}
+		if pixel {
+			c = color.RGBA{0, 0, 0, 255}
+		}
+		display.SetPixel(x, y, c)
+		display.Display()
+
+		x += deltaX
+		y += deltaY
+
+		if x == 0 || x == 127 {
+			deltaX = -deltaX
+		}
+
+		if y == 0 || y == 63 {
+			deltaY = -deltaY
+		}
+		time.Sleep(1 * time.Millisecond)
+	}
+}