mirror of
https://github.com/tinygo-org/drivers.git
synced 2026-08-20 06:28:59 +00:00
Add Waveshare 4.2in B/W e-paper driver (#183)
* waveshare-epd/epd4in2: Add Waveshare 4.2in e-paper driver
This commit is contained in:
Tim Boldt
GitHub
@@ -119,6 +119,8 @@ smoke-test:
|
|||||||
@md5sum ./build/test.hex
|
@md5sum ./build/test.hex
|
||||||
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
|
||||||
@md5sum ./build/test.hex
|
@md5sum ./build/test.hex
|
||||||
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd4in2/main.go
|
||||||
|
@md5sum ./build/test.hex
|
||||||
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/ntpclient/main.go
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/ntpclient/main.go
|
||||||
@md5sum ./build/test.hex
|
@md5sum ./build/test.hex
|
||||||
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/udpstation/main.go
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/udpstation/main.go
|
||||||
|
|||||||
@@ -52,7 +52,7 @@ func main() {
|
|||||||
|
|
||||||
## Currently supported devices
|
## Currently supported devices
|
||||||
|
|
||||||
The following 52 devices are supported.
|
The following 53 devices are supported.
|
||||||
|
|
||||||
| Device Name | Interface Type |
|
| Device Name | Interface Type |
|
||||||
|----------|-------------|
|
|----------|-------------|
|
||||||
@@ -107,6 +107,7 @@ The following 52 devices are supported.
|
|||||||
| [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf) | I2C |
|
| [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf) | I2C |
|
||||||
| [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf) | SPI |
|
| [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf) | SPI |
|
||||||
| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf) | SPI |
|
| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf) | SPI |
|
||||||
|
| [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf) | SPI |
|
||||||
| [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf) | GPIO |
|
| [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf) | GPIO |
|
||||||
|
|
||||||
## Contributing
|
## Contributing
|
||||||
|
|||||||
@@ -0,0 +1,56 @@
|
|||||||
|
package main
|
||||||
|
|
||||||
|
import (
|
||||||
|
"machine"
|
||||||
|
|
||||||
|
"image/color"
|
||||||
|
|
||||||
|
"time"
|
||||||
|
|
||||||
|
"tinygo.org/x/drivers/waveshare-epd/epd4in2"
|
||||||
|
)
|
||||||
|
|
||||||
|
var display epd4in2.Device
|
||||||
|
|
||||||
|
func main() {
|
||||||
|
machine.SPI0.Configure(machine.SPIConfig{
|
||||||
|
Frequency: 8000000,
|
||||||
|
Mode: 0,
|
||||||
|
})
|
||||||
|
|
||||||
|
display = epd4in2.New(machine.SPI0, machine.P6, machine.P7, machine.P8, machine.P9)
|
||||||
|
display.Configure(epd4in2.Config{})
|
||||||
|
|
||||||
|
black := color.RGBA{1, 1, 1, 255}
|
||||||
|
|
||||||
|
display.ClearBuffer()
|
||||||
|
println("Clear the display")
|
||||||
|
display.ClearDisplay()
|
||||||
|
display.WaitUntilIdle()
|
||||||
|
println("Waiting for 2 seconds")
|
||||||
|
time.Sleep(2 * time.Second)
|
||||||
|
|
||||||
|
// Show a checkered board
|
||||||
|
for i := int16(0); i < 16; i++ {
|
||||||
|
for j := int16(0); j < 25; j++ {
|
||||||
|
if (i+j)%2 == 0 {
|
||||||
|
showRect(i*8, j*10, 8, 10, black)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
println("Show checkered board")
|
||||||
|
display.Display()
|
||||||
|
display.WaitUntilIdle()
|
||||||
|
println("Waiting for 2 seconds")
|
||||||
|
time.Sleep(2 * time.Second)
|
||||||
|
|
||||||
|
println("You could remove power now")
|
||||||
|
}
|
||||||
|
|
||||||
|
func showRect(x int16, y int16, w int16, h int16, c color.RGBA) {
|
||||||
|
for i := x; i < x+w; i++ {
|
||||||
|
for j := y; j < y+h; j++ {
|
||||||
|
display.SetPixel(i, j, c)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
@@ -0,0 +1,355 @@
|
|||||||
|
// Package epd4in2 implements a driver for Waveshare 4.2in black and white e-paper device.
|
||||||
|
//
|
||||||
|
// Derived from:
|
||||||
|
// https://github.com/tinygo-org/drivers/tree/master/waveshare-epd
|
||||||
|
// https://github.com/waveshare/e-Paper/blob/master/Arduino/epd4in2/epd4in2.cpp
|
||||||
|
//
|
||||||
|
// Datasheet: https://www.waveshare.com/wiki/4.2inch_e-Paper_Module
|
||||||
|
//
|
||||||
|
package epd4in2
|
||||||
|
|
||||||
|
import (
|
||||||
|
"image/color"
|
||||||
|
"machine"
|
||||||
|
"time"
|
||||||
|
)
|
||||||
|
|
||||||
|
type Config struct {
|
||||||
|
Width int16 // Width is the display resolution
|
||||||
|
Height int16
|
||||||
|
LogicalWidth int16 // LogicalWidth must be a multiple of 8 and same size or bigger than Width
|
||||||
|
Rotation Rotation // Rotation is clock-wise
|
||||||
|
}
|
||||||
|
|
||||||
|
type Device struct {
|
||||||
|
bus machine.SPI
|
||||||
|
cs machine.Pin
|
||||||
|
dc machine.Pin
|
||||||
|
rst machine.Pin
|
||||||
|
busy machine.Pin
|
||||||
|
logicalWidth int16
|
||||||
|
width int16
|
||||||
|
height int16
|
||||||
|
buffer []uint8
|
||||||
|
bufferLength uint32
|
||||||
|
rotation Rotation
|
||||||
|
}
|
||||||
|
|
||||||
|
type Rotation uint8
|
||||||
|
|
||||||
|
// New returns a new epd4in2 driver. Pass in a fully configured SPI bus.
|
||||||
|
func New(bus machine.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
|
||||||
|
csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
|
||||||
|
dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
|
||||||
|
rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
|
||||||
|
busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
|
||||||
|
return Device{
|
||||||
|
bus: bus,
|
||||||
|
cs: csPin,
|
||||||
|
dc: dcPin,
|
||||||
|
rst: rstPin,
|
||||||
|
busy: busyPin,
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Configure sets up the device.
|
||||||
|
func (d *Device) Configure(cfg Config) {
|
||||||
|
if cfg.LogicalWidth != 0 {
|
||||||
|
d.logicalWidth = cfg.LogicalWidth
|
||||||
|
} else {
|
||||||
|
d.logicalWidth = EPD_WIDTH
|
||||||
|
}
|
||||||
|
if cfg.Width != 0 {
|
||||||
|
d.width = cfg.Width
|
||||||
|
} else {
|
||||||
|
d.width = EPD_WIDTH
|
||||||
|
}
|
||||||
|
if cfg.Height != 0 {
|
||||||
|
d.height = cfg.Height
|
||||||
|
} else {
|
||||||
|
d.height = EPD_HEIGHT
|
||||||
|
}
|
||||||
|
d.rotation = cfg.Rotation
|
||||||
|
d.bufferLength = (uint32(d.logicalWidth) * uint32(d.height)) / 8
|
||||||
|
d.buffer = make([]uint8, d.bufferLength)
|
||||||
|
for i := uint32(0); i < d.bufferLength; i++ {
|
||||||
|
d.buffer[i] = 0xFF
|
||||||
|
}
|
||||||
|
|
||||||
|
d.cs.Low()
|
||||||
|
d.dc.Low()
|
||||||
|
d.rst.Low()
|
||||||
|
|
||||||
|
d.Reset()
|
||||||
|
d.SendCommand(POWER_SETTING)
|
||||||
|
d.SendData(0x03) // VDS_EN, VDG_EN
|
||||||
|
d.SendData(0x00) // VCOM_HV, VGHL_LV[1], VGHL_LV[0]
|
||||||
|
d.SendData(0x2b) // VDH
|
||||||
|
d.SendData(0x2b) // VDL
|
||||||
|
d.SendData(0xff) // VDHR
|
||||||
|
d.SendCommand(BOOSTER_SOFT_START)
|
||||||
|
d.SendData(0x17)
|
||||||
|
d.SendData(0x17)
|
||||||
|
d.SendData(0x17) //07 0f 17 1f 27 2F 37 2f
|
||||||
|
d.SendCommand(POWER_ON)
|
||||||
|
d.WaitUntilIdle()
|
||||||
|
d.SendCommand(PANEL_SETTING)
|
||||||
|
d.SendData(0xbf) // KW-BF KWR-AF BWROTP 0f
|
||||||
|
d.SendData(0x0b)
|
||||||
|
d.SendCommand(PLL_CONTROL)
|
||||||
|
d.SendData(0x3c) // 3A 100HZ 29 150Hz 39 200HZ 31 171HZ
|
||||||
|
}
|
||||||
|
|
||||||
|
// Reset resets the device
|
||||||
|
func (d *Device) Reset() {
|
||||||
|
d.rst.Low()
|
||||||
|
time.Sleep(200 * time.Millisecond)
|
||||||
|
d.rst.High()
|
||||||
|
time.Sleep(200 * time.Millisecond)
|
||||||
|
}
|
||||||
|
|
||||||
|
// DeepSleep puts the display into deepsleep
|
||||||
|
func (d *Device) DeepSleep() {
|
||||||
|
d.SendCommand(VCOM_AND_DATA_INTERVAL_SETTING)
|
||||||
|
d.SendData(0x17) //border floating
|
||||||
|
d.SendCommand(VCM_DC_SETTING) //VCOM to 0V
|
||||||
|
d.SendCommand(PANEL_SETTING)
|
||||||
|
time.Sleep(100 * time.Millisecond)
|
||||||
|
|
||||||
|
d.SendCommand(POWER_SETTING) //VG&VS to 0V fast
|
||||||
|
d.SendData(0x00)
|
||||||
|
d.SendData(0x00)
|
||||||
|
d.SendData(0x00)
|
||||||
|
d.SendData(0x00)
|
||||||
|
d.SendData(0x00)
|
||||||
|
time.Sleep(100 * time.Millisecond)
|
||||||
|
|
||||||
|
d.SendCommand(POWER_OFF) //power off
|
||||||
|
d.WaitUntilIdle()
|
||||||
|
d.SendCommand(DEEP_SLEEP) //deep sleep
|
||||||
|
d.SendData(0xA5)
|
||||||
|
}
|
||||||
|
|
||||||
|
// SendCommand sends a command to the display
|
||||||
|
func (d *Device) SendCommand(command uint8) {
|
||||||
|
d.sendDataCommand(true, command)
|
||||||
|
}
|
||||||
|
|
||||||
|
// SendData sends a data byte to the display
|
||||||
|
func (d *Device) SendData(data uint8) {
|
||||||
|
d.sendDataCommand(false, data)
|
||||||
|
}
|
||||||
|
|
||||||
|
// sendDataCommand sends image data or a command to the screen
|
||||||
|
func (d *Device) sendDataCommand(isCommand bool, data uint8) {
|
||||||
|
if isCommand {
|
||||||
|
d.dc.Low()
|
||||||
|
} else {
|
||||||
|
d.dc.High()
|
||||||
|
}
|
||||||
|
d.cs.Low()
|
||||||
|
d.bus.Transfer(data)
|
||||||
|
d.cs.High()
|
||||||
|
}
|
||||||
|
|
||||||
|
// SetLUT sets the look up tables for full or partial updates
|
||||||
|
func (d *Device) SetLUT() {
|
||||||
|
lut_vcom0 := []uint8{
|
||||||
|
0x00, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x17, 0x17, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||||
|
0x00, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, // 44 bytes, unlike the others
|
||||||
|
}
|
||||||
|
lut_ww := []uint8{
|
||||||
|
0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||||
|
0x90, 0x17, 0x17, 0x00, 0x00, 0x02,
|
||||||
|
0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||||
|
0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
}
|
||||||
|
lut_bw := []uint8{
|
||||||
|
0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||||
|
0x90, 0x17, 0x17, 0x00, 0x00, 0x02,
|
||||||
|
0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||||
|
0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
}
|
||||||
|
lut_bb := []uint8{
|
||||||
|
0x80, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||||
|
0x90, 0x17, 0x17, 0x00, 0x00, 0x02,
|
||||||
|
0x80, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||||
|
0x50, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
}
|
||||||
|
lut_wb := []uint8{
|
||||||
|
0x80, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||||
|
0x90, 0x17, 0x17, 0x00, 0x00, 0x02,
|
||||||
|
0x80, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||||
|
0x50, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||||
|
}
|
||||||
|
|
||||||
|
d.SendCommand(LUT_FOR_VCOM) //vcom
|
||||||
|
for count := 0; count < 44; count++ {
|
||||||
|
d.SendData(lut_vcom0[count])
|
||||||
|
}
|
||||||
|
|
||||||
|
d.SendCommand(LUT_WHITE_TO_WHITE) //ww --
|
||||||
|
for count := 0; count < 42; count++ {
|
||||||
|
d.SendData(lut_ww[count])
|
||||||
|
}
|
||||||
|
|
||||||
|
d.SendCommand(LUT_BLACK_TO_WHITE) //bw r
|
||||||
|
for count := 0; count < 42; count++ {
|
||||||
|
d.SendData(lut_bw[count])
|
||||||
|
}
|
||||||
|
|
||||||
|
d.SendCommand(LUT_WHITE_TO_BLACK) //wb w
|
||||||
|
for count := 0; count < 42; count++ {
|
||||||
|
d.SendData(lut_bb[count])
|
||||||
|
}
|
||||||
|
|
||||||
|
d.SendCommand(LUT_BLACK_TO_BLACK) //bb b
|
||||||
|
for count := 0; count < 42; count++ {
|
||||||
|
d.SendData(lut_wb[count])
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// SetPixel modifies the internal buffer in a single pixel.
|
||||||
|
// The display have 2 colors: black and white
|
||||||
|
// We use RGBA(0,0,0, 255) as white (transparent)
|
||||||
|
// Anything else as black
|
||||||
|
func (d *Device) SetPixel(x int16, y int16, c color.RGBA) {
|
||||||
|
x, y = d.xy(x, y)
|
||||||
|
if x < 0 || x >= d.logicalWidth || y < 0 || y >= d.height {
|
||||||
|
return
|
||||||
|
}
|
||||||
|
byteIndex := (uint32(x) + uint32(y)*uint32(d.logicalWidth)) / 8
|
||||||
|
if c.R == 0 && c.G == 0 && c.B == 0 { // TRANSPARENT / WHITE
|
||||||
|
d.buffer[byteIndex] |= 0x80 >> uint8(x%8)
|
||||||
|
} else { // WHITE / EMPTY
|
||||||
|
d.buffer[byteIndex] &^= 0x80 >> uint8(x%8)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Display sends the buffer to the screen.
|
||||||
|
func (d *Device) Display() error {
|
||||||
|
d.SendCommand(RESOLUTION_SETTING)
|
||||||
|
d.SendData(uint8(d.height >> 8))
|
||||||
|
d.SendData(uint8(d.logicalWidth & 0xff))
|
||||||
|
d.SendData(uint8(d.height >> 8))
|
||||||
|
d.SendData(uint8(d.height & 0xff))
|
||||||
|
|
||||||
|
d.SendCommand(VCM_DC_SETTING)
|
||||||
|
d.SendData(0x12)
|
||||||
|
|
||||||
|
d.SendCommand(VCOM_AND_DATA_INTERVAL_SETTING)
|
||||||
|
d.SendCommand(0x97) //VBDF 17|D7 VBDW 97 VBDB 57 VBDF F7 VBDW 77 VBDB 37 VBDR B7
|
||||||
|
|
||||||
|
d.SendCommand(DATA_START_TRANSMISSION_1)
|
||||||
|
var i int16
|
||||||
|
for i = 0; i < d.logicalWidth/8*d.height; i++ {
|
||||||
|
d.SendData(0xFF) // bit set: white, bit reset: black
|
||||||
|
}
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
d.SendCommand(DATA_START_TRANSMISSION_2)
|
||||||
|
for i = 0; i < d.logicalWidth/8*d.height; i++ {
|
||||||
|
d.SendData(d.buffer[i])
|
||||||
|
}
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
|
||||||
|
d.SetLUT()
|
||||||
|
|
||||||
|
d.SendCommand(DISPLAY_REFRESH)
|
||||||
|
time.Sleep(100 * time.Millisecond)
|
||||||
|
d.WaitUntilIdle()
|
||||||
|
|
||||||
|
return nil
|
||||||
|
}
|
||||||
|
|
||||||
|
// ClearDisplay erases the device SRAM
|
||||||
|
func (d *Device) ClearDisplay() {
|
||||||
|
d.SendCommand(RESOLUTION_SETTING)
|
||||||
|
d.SendData(uint8(d.height >> 8))
|
||||||
|
d.SendData(uint8(d.logicalWidth & 0xff))
|
||||||
|
d.SendData(uint8(d.height >> 8))
|
||||||
|
d.SendData(uint8(d.height & 0xff))
|
||||||
|
|
||||||
|
d.SendCommand(DATA_START_TRANSMISSION_1)
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
var i int16
|
||||||
|
for i = 0; i < d.logicalWidth/8*d.height; i++ {
|
||||||
|
d.SendData(0xFF)
|
||||||
|
}
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
d.SendCommand(DATA_START_TRANSMISSION_2)
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
for i = 0; i < d.logicalWidth/8*d.height; i++ {
|
||||||
|
d.SendData(0xFF)
|
||||||
|
}
|
||||||
|
time.Sleep(2 * time.Millisecond)
|
||||||
|
|
||||||
|
d.SetLUT()
|
||||||
|
d.SendCommand(DISPLAY_REFRESH)
|
||||||
|
time.Sleep(100 * time.Millisecond)
|
||||||
|
d.WaitUntilIdle()
|
||||||
|
}
|
||||||
|
|
||||||
|
// WaitUntilIdle waits until the display is ready
|
||||||
|
func (d *Device) WaitUntilIdle() {
|
||||||
|
for d.busy.Get() {
|
||||||
|
time.Sleep(100 * time.Millisecond)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// IsBusy returns the busy status of the display
|
||||||
|
func (d *Device) IsBusy() bool {
|
||||||
|
return d.busy.Get()
|
||||||
|
}
|
||||||
|
|
||||||
|
// ClearBuffer sets the buffer to 0xFF (white)
|
||||||
|
func (d *Device) ClearBuffer() {
|
||||||
|
for i := uint32(0); i < d.bufferLength; i++ {
|
||||||
|
d.buffer[i] = 0xFF
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Size returns the current size of the display.
|
||||||
|
func (d *Device) Size() (w, h int16) {
|
||||||
|
if d.rotation == ROTATION_90 || d.rotation == ROTATION_270 {
|
||||||
|
return d.height, d.logicalWidth
|
||||||
|
}
|
||||||
|
return d.logicalWidth, d.height
|
||||||
|
}
|
||||||
|
|
||||||
|
// SetRotation changes the rotation (clock-wise) of the device
|
||||||
|
func (d *Device) SetRotation(rotation Rotation) {
|
||||||
|
d.rotation = rotation
|
||||||
|
}
|
||||||
|
|
||||||
|
// xy chages the coordinates according to the rotation
|
||||||
|
func (d *Device) xy(x, y int16) (int16, int16) {
|
||||||
|
switch d.rotation {
|
||||||
|
case NO_ROTATION:
|
||||||
|
return x, y
|
||||||
|
case ROTATION_90:
|
||||||
|
return d.width - y - 1, x
|
||||||
|
case ROTATION_180:
|
||||||
|
return d.width - x - 1, d.height - y - 1
|
||||||
|
case ROTATION_270:
|
||||||
|
return y, d.height - x - 1
|
||||||
|
}
|
||||||
|
return x, y
|
||||||
|
}
|
||||||
@@ -0,0 +1,55 @@
|
|||||||
|
package epd4in2
|
||||||
|
|
||||||
|
// Derived from https://github.com/waveshare/e-Paper/blob/master/Arduino/epd4in2/epd4in2.h
|
||||||
|
|
||||||
|
// Registers
|
||||||
|
const (
|
||||||
|
// Display resolution
|
||||||
|
EPD_WIDTH = 400
|
||||||
|
EPD_HEIGHT = 300
|
||||||
|
|
||||||
|
// EPD4IN2 commands
|
||||||
|
PANEL_SETTING = 0x00
|
||||||
|
POWER_SETTING = 0x01
|
||||||
|
POWER_OFF = 0x02
|
||||||
|
POWER_OFF_SEQUENCE_SETTING = 0x03
|
||||||
|
POWER_ON = 0x04
|
||||||
|
POWER_ON_MEASURE = 0x05
|
||||||
|
BOOSTER_SOFT_START = 0x06
|
||||||
|
DEEP_SLEEP = 0x07
|
||||||
|
DATA_START_TRANSMISSION_1 = 0x10
|
||||||
|
DATA_STOP = 0x11
|
||||||
|
DISPLAY_REFRESH = 0x12
|
||||||
|
DATA_START_TRANSMISSION_2 = 0x13
|
||||||
|
LUT_FOR_VCOM = 0x20
|
||||||
|
LUT_WHITE_TO_WHITE = 0x21
|
||||||
|
LUT_BLACK_TO_WHITE = 0x22
|
||||||
|
LUT_WHITE_TO_BLACK = 0x23
|
||||||
|
LUT_BLACK_TO_BLACK = 0x24
|
||||||
|
PLL_CONTROL = 0x30
|
||||||
|
TEMPERATURE_SENSOR_COMMAND = 0x40
|
||||||
|
TEMPERATURE_SENSOR_SELECTION = 0x41
|
||||||
|
TEMPERATURE_SENSOR_WRITE = 0x42
|
||||||
|
TEMPERATURE_SENSOR_READ = 0x43
|
||||||
|
VCOM_AND_DATA_INTERVAL_SETTING = 0x50
|
||||||
|
LOW_POWER_DETECTION = 0x51
|
||||||
|
TCON_SETTING = 0x60
|
||||||
|
RESOLUTION_SETTING = 0x61
|
||||||
|
GSST_SETTING = 0x65
|
||||||
|
GET_STATUS = 0x71
|
||||||
|
AUTO_MEASUREMENT_VCOM = 0x80
|
||||||
|
READ_VCOM_VALUE = 0x81
|
||||||
|
VCM_DC_SETTING = 0x82
|
||||||
|
PARTIAL_WINDOW = 0x90
|
||||||
|
PARTIAL_IN = 0x91
|
||||||
|
PARTIAL_OUT = 0x92
|
||||||
|
PROGRAM_MODE = 0xA0
|
||||||
|
ACTIVE_PROGRAMMING = 0xA1
|
||||||
|
READ_OTP = 0xA2
|
||||||
|
POWER_SAVING = 0xE3
|
||||||
|
|
||||||
|
NO_ROTATION Rotation = 0
|
||||||
|
ROTATION_90 Rotation = 1 // 90 degrees clock-wise rotation
|
||||||
|
ROTATION_180 Rotation = 2
|
||||||
|
ROTATION_270 Rotation = 3
|
||||||
|
)
|
||||||
Reference in New Issue
Block a user