Make TLS work over WiFiNINA

Verified on Arduino Nano33 IoT and nina fw v1.4.5

examples/wifinina/tlsclient/main.go

@@ -0,0 +1,156 @@
+// This example opens a TCP connection using a device with WiFiNINA firmware
+// and sends a HTTPS request to retrieve a webpage
+//
+// You shall see "strict-transport-security" header in the response,
+// this confirms communication is indeed over HTTPS
+// https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Strict-Transport-Security
+//
+package main
+
+import (
+	"fmt"
+	"machine"
+	"strings"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/net/tls"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const server = "tinygo.org"
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor *wifinina.Device
+)
+
+var buf [256]byte
+
+var lastRequestTime time.Time
+var conn net.Conn
+
+func setup() {
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	adaptor = wifinina.New(spi,
+		machine.NINA_CS,
+		machine.NINA_ACK,
+		machine.NINA_GPIO0,
+		machine.NINA_RESETN)
+	adaptor.Configure()
+}
+
+func main() {
+
+	setup()
+
+	waitSerial()
+
+	connectToAP()
+
+	for {
+		readConnection()
+		if time.Now().Sub(lastRequestTime).Milliseconds() >= 10000 {
+			makeHTTPSRequest()
+		}
+	}
+
+}
+
+// Wait for user to open serial console
+func waitSerial() {
+	for !machine.UART0.DTR() {
+		time.Sleep(100 * time.Millisecond)
+	}
+}
+
+func readConnection() {
+	if conn != nil {
+		for n, err := conn.Read(buf[:]); n > 0; n, err = conn.Read(buf[:]) {
+			if err != nil {
+				println("Read error: " + err.Error())
+			} else {
+				print(string(buf[0:n]))
+			}
+		}
+	}
+}
+
+func makeHTTPSRequest() {
+
+	var err error
+	if conn != nil {
+		conn.Close()
+	}
+
+	message("\r\n---------------\r\nDialing TCP connection")
+	conn, err = tls.Dial("tcp", server, nil)
+	for ; err != nil; conn, err = tls.Dial("tcp", server, nil) {
+		message("Connection failed: " + err.Error())
+		time.Sleep(5 * time.Second)
+	}
+	println("Connected!\r")
+
+	print("Sending HTTPS request...")
+	fmt.Fprintln(conn, "GET / HTTP/1.1")
+	fmt.Fprintln(conn, "Host:", strings.Split(server, ":")[0])
+	fmt.Fprintln(conn, "User-Agent: TinyGo")
+	fmt.Fprintln(conn, "Connection: close")
+	fmt.Fprintln(conn)
+	println("Sent!\r\n\r")
+
+	lastRequestTime = time.Now()
+}
+
+// connect to access point
+func connectToAP() {
+	if len(ssid) == 0 || len(pass) == 0 {
+		for {
+			println("Connection failed: Either ssid or password not set")
+			time.Sleep(10 * time.Second)
+		}
+	}
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}