Add network device driver model, netdev

examples/net/tcpclient/espat.go

@@ -0,0 +1,23 @@
+//go:build challenger_rp2040
+
+// +build: challenger_rp2040
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/espat"
+)
+
+var cfg = espat.Config{
+	// WiFi AP credentials
+	Ssid:       ssid,
+	Passphrase: pass,
+	// UART
+	Uart: machine.UART1,
+	Tx:   machine.UART1_TX_PIN,
+	Rx:   machine.UART1_RX_PIN,
+}
+
+var netdev = espat.New(&cfg)

examples/net/tcpclient/main.go

@@ -0,0 +1,92 @@
+// This example opens a TCP connection and sends some data, for the purpose of
+// testing speed and connectivity.
+//
+// You can open a server to accept connections from this program using:
+//
+// nc -lk 8080
+
+package main
+
+import (
+	"bytes"
+	"fmt"
+	"log"
+	"machine"
+	"net"
+	"time"
+)
+
+var (
+	ssid string
+	pass string
+	addr string = "10.0.0.100:8080"
+)
+
+var buf = &bytes.Buffer{}
+
+func main() {
+
+	waitSerial()
+
+	if err := netdev.NetConnect(); err != nil {
+		log.Fatal(err)
+	}
+
+	for {
+		sendBatch()
+		time.Sleep(500 * time.Millisecond)
+	}
+}
+
+func sendBatch() {
+
+	// make TCP connection
+	message("---------------\r\nDialing TCP connection")
+	conn, err := net.Dial("tcp", addr)
+	for ; err != nil; conn, err = net.Dial("tcp", addr) {
+		message(err.Error())
+		time.Sleep(5 * time.Second)
+	}
+
+	n := 0
+	w := 0
+	start := time.Now()
+
+	// send data
+	message("Sending data")
+
+	for i := 0; i < 1000; i++ {
+		buf.Reset()
+		fmt.Fprint(buf,
+			"\r---------------------------- i == ", i, " ----------------------------"+
+				"\r---------------------------- i == ", i, " ----------------------------")
+		if w, err = conn.Write(buf.Bytes()); err != nil {
+			println("error:", err.Error(), "\r")
+			break
+		}
+		n += w
+	}
+
+	buf.Reset()
+	ms := time.Now().Sub(start).Milliseconds()
+	fmt.Fprint(buf, "\nWrote ", n, " bytes in ", ms, " ms\r\n")
+	message(buf.String())
+
+	if _, err := conn.Write(buf.Bytes()); err != nil {
+		println("error:", err.Error(), "\r")
+	}
+
+	println("Disconnecting TCP...")
+	conn.Close()
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}
+
+// Wait for user to open serial console
+func waitSerial() {
+	for !machine.Serial.DTR() {
+		time.Sleep(100 * time.Millisecond)
+	}
+}

examples/net/tcpclient/rtl8720dn.go

@@ -0,0 +1,29 @@
+//go:build wioterminal
+
+// +build: wioterminal
+
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/rtl8720dn"
+)
+
+var cfg = rtl8720dn.Config{
+	// WiFi AP credentials
+	Ssid:       ssid,
+	Passphrase: pass,
+	// Device
+	En: machine.RTL8720D_CHIP_PU,
+	// UART
+	Uart:     machine.UART3,
+	Tx:       machine.PB24,
+	Rx:       machine.PC24,
+	Baudrate: 614400,
+	// Watchdog (set to 0 to disable)
+	WatchdogTimeo: time.Duration(20 * time.Second),
+}
+
+var netdev = rtl8720dn.New(&cfg)

examples/net/tcpclient/wifinina.go

@@ -0,0 +1,33 @@
+//go:build pyportal || arduino_nano33 || nano_rp2040 || metro_m4_airlift || arduino_mkrwifi1010 || matrixportal_m4
+
+// +build: pyportal arduino_nano33 nano_rp2040 metro_m4_airlift arduino_mkrwifi1010 matrixportal_m4
+
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/wifinina"
+)
+
+var cfg = wifinina.Config{
+	// WiFi AP credentials
+	Ssid:       ssid,
+	Passphrase: pass,
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	Spi:  machine.NINA_SPI,
+	Freq: 8 * 1e6,
+	Sdo:  machine.NINA_SDO,
+	Sdi:  machine.NINA_SDI,
+	Sck:  machine.NINA_SCK,
+	// Device pins
+	Cs:     machine.NINA_CS,
+	Ack:    machine.NINA_ACK,
+	Gpio0:  machine.NINA_GPIO0,
+	Resetn: machine.NINA_RESETN,
+	// Watchdog (set to 0 to disable)
+	WatchdogTimeo: time.Duration(20 * time.Second),
+}
+
+var netdev = wifinina.New(&cfg)