all: correct go fmt

Signed-off-by: deadprogram <ron@hybridgroup.com>

adt7410/adt7410.go

@@ -1,7 +1,6 @@
 // Package adt7410 provides a driver for the adt7410 I2C Temperature Sensor.
 //
 // Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf
-//
 package adt7410 // import "tinygo.org/x/drivers/adt7410"
 
 import (

adxl345/adxl345.go

@@ -3,7 +3,6 @@
 // Datasheet EN: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
 //
 // Datasheet JP: http://www.analog.com/media/jp/technical-documentation/data-sheets/ADXL345_jp.pdf
-//
 package adxl345 // import "tinygo.org/x/drivers/adxl345"
 
 import "tinygo.org/x/drivers"

apds9960/apds9960.go

@@ -2,7 +2,6 @@
 // a digital proximity, ambient light, RGB and gesture sensor.
 //
 // Datasheet: https://cdn.sparkfun.com/assets/learn_tutorials/3/2/1/Avago-APDS-9960-datasheet.pdf
-//
 package apds9960
 
 import (

axp192/axp192.go

@@ -3,7 +3,6 @@
 //
 // http://www.x-powers.com/en.php/Info/product_detail/article_id/29
 // Datasheet: https://github.com/m5stack/M5-Schematic/blob/master/Core/AXP192%20Datasheet_v1.1_en_draft_2211.pdf
-//
 package axp192 // import "tinygo.org/x/drivers/axp192"
 
 import (

bh1750/bh1750.go

@@ -2,7 +2,6 @@
 //
 // Datasheet:
 // https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf
-//
 package bh1750 // import "tinygo.org/x/drivers/bh1750"
 
 import (

blinkm/blinkm.go

@@ -1,7 +1,6 @@
 // Package blinkm implements a driver for the BlinkM I2C RGB LED.
 //
 // Datasheet: http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf
-//
 package blinkm // import "tinygo.org/x/drivers/blinkm"
 
 import "tinygo.org/x/drivers"

bme280/bme280.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf
-//
 package bme280
 
 import (
@@ -149,7 +148,8 @@ func (d *Device) ReadHumidity() (int32, error) {
 // ReadAltitude returns the current altitude in meters based on the
 // current barometric pressure and estimated pressure at sea level.
 // Calculation is based on code from Adafruit BME280 library
-// 	https://github.com/adafruit/Adafruit_BME280_Library
+//
+//	https://github.com/adafruit/Adafruit_BME280_Library
 func (d *Device) ReadAltitude() (alt int32, err error) {
 	mPa, _ := d.ReadPressure()
 	atmP := float32(mPa) / 100000

bmp180/bmp180.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
-//
 package bmp180 // import "tinygo.org/x/drivers/bmp180"
 
 import (

buzzer/buzzer.go

@@ -1,5 +1,4 @@
 // Package buzzer provides a very simplistic driver for a connected buzzer or low-fidelity speaker.
-//
 package buzzer // import "tinygo.org/x/drivers/buzzer"
 
 import (

drivers.go

@@ -3,22 +3,22 @@
 //
 // Here is an example in TinyGo that uses the BMP180 digital barometer:
 //
-// 	package main
+//	package main
 //
-// 	import (
+//	import (
 //		"time"
 //		"machine"
 //
-// 		"tinygo.org/x/drivers/bmp180"
+//		"tinygo.org/x/drivers/bmp180"
-// 	)
+//	)
 //
-// 	func main() {
+//	func main() {
 //		machine.I2C0.Configure(machine.I2CConfig{})
 //		sensor := bmp180.New(machine.I2C0)
 //		sensor.Configure()
 //
-// 		connected := sensor.Connected()
+//		connected := sensor.Connected()
-// 		if !connected {
+//		if !connected {
 //			println("BMP180 not detected")
 //			return
 //		}
@@ -38,5 +38,4 @@
 // Each individual driver is contained within its own sub-package within this package and
 // there are no interdependencies in order to minimize the final size of compiled code that
 // uses any of these drivers.
-//
 package drivers // import "tinygo.org/x/drivers"

ds1307/ds1307.go

@@ -2,7 +2,6 @@
 //
 // Datasheet:
 // https://datasheets.maximintegrated.com/en/ds/DS1307.pdf
-//
 package ds1307 // import "tinygo.org/x/drivers/ds1307"
 
 import (

espat/espat.go

@@ -15,7 +15,6 @@
 //
 // AT command set:
 // https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
-//
 package espat // import "tinygo.org/x/drivers/espat"
 
 import (

examples/ili9341/initdisplay/atsamd21.go

@@ -9,8 +9,6 @@ import (
 	"tinygo.org/x/drivers/ili9341"
 )
 
-var ()
-
 func InitDisplay() *ili9341.Device {
 	machine.SPI0.Configure(machine.SPIConfig{
 		SCK:       machine.SPI0_SCK_PIN,

examples/microphone/main.go

@@ -2,7 +2,6 @@
 // to read data from the onboard MEMS microphone.
 //
 // Uses ideas from the https://github.com/adafruit/Adafruit_CircuitPlayground repo.
-//
 package main
 
 import (

examples/sx126x/rfswitch/gnse.go

@@ -2,13 +2,13 @@
 // +build gnse
 
 /*
- Generic Node Sensor Edition
+Generic Node Sensor Edition
- RFSwitch
+RFSwitch
 
- Disable Switch   :  PB8=OFF PA0=OFF  PA1=OFF
+Disable Switch   :  PB8=OFF PA0=OFF  PA1=OFF
- Enable RX        :  PB8=ON  PA0=ON   PA1=OFF
+Enable RX        :  PB8=ON  PA0=ON   PA1=OFF
- Enable TX RFO LP :  PB8=ON  PA0=ON   PA1=ON
+Enable TX RFO LP :  PB8=ON  PA0=ON   PA1=ON
- Enable TX RFO HP :  PB8=ON  PA0=OFF  PA1=ON
+Enable TX RFO HP :  PB8=ON  PA0=OFF  PA1=ON
 */
 package rfswitch
 

examples/sx126x/rfswitch/wl55jc.go

@@ -2,8 +2,8 @@
 // +build nucleowl55jc
 
 /*
- Nucleo WL55JC1
+	Nucleo WL55JC1
- RFSwitch
+	RFSwitch
 
 +-----------+---------+------------+------------+
 |           | FE_CTRL1 |  FE_CTRL2 |   FE_CTRL3 |

ft6336/ft6336.go

@@ -2,7 +2,6 @@
 // panel controller.
 //
 // Datasheet: https://focuslcds.com/content/FT6236.pdf
-//
 package ft6336
 
 import (
@@ -42,8 +41,9 @@ func (d *Device) Configure(config Config) error {
 }
 
 // SetGMode sets interrupt mode.
-//  0x00 : Interrupt Polling mode
+//
-//  0x01 : Interrupt Trigger mode (default)
+//	0x00 : Interrupt Polling mode
+//	0x01 : Interrupt Trigger mode (default)
 func (d *Device) SetGMode(v uint8) {
 	d.write1Byte(RegGMode, v)
 }

gc9a01/gc9a01.go

@@ -1,7 +1,6 @@
 // Package gc9a01 implements a driver for the gc9a01 LCD round display
 //
 // Datasheet: https://www.waveshare.com/w/upload/5/5e/GC9A01A.pdf
-//
 package gc9a01 // import "tinygo.org/x/drivers/gc9a01"
 
 import (

hd44780/hd44780.go

@@ -1,7 +1,6 @@
 // Package hd44780 provides a driver for the HD44780 LCD controller.
 //
 // Datasheet: https://www.sparkfun.com/datasheets/LCD/HD44780.pdf
-//
 package hd44780 // import "tinygo.org/x/drivers/hd44780"
 
 import (

hd44780i2c/hd44780i2c.go

@@ -2,7 +2,6 @@
 // with an I2C adapter.
 //
 // Datasheet: https://www.sparkfun.com/datasheets/LCD/HD44780.pdf
-//
 package hd44780i2c
 
 import (

hts221/hts221.go

@@ -2,7 +2,6 @@
 // a capacitive digital sensor for relative humidity and temperature.
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/hts221.pdf
-//
 package hts221
 
 import (
@@ -85,7 +84,6 @@ func (d *Device) ReadTemperature() (temperature int32, err error) {
 // Resolution sets the HTS221's resolution mode.
 // The higher resolutions are more accurate but comsume more power (see datasheet).
 // The number of averaged samples will be (h + 2) ^ 2, (t + 1) ^ 2
-//
 func (d *Device) Resolution(h uint8, t uint8) {
 	if h > 7 {
 		h = 3 // default

hub75/hub75.go

@@ -2,7 +2,6 @@
 //
 // Guide: https://cdn-learn.adafruit.com/downloads/pdf/32x16-32x32-rgb-led-matrix.pdf
 // This driver was inspired by https://github.com/2dom/PxMatrix
-//
 package hub75 // import "tinygo.org/x/drivers/hub75"
 
 import (

image/internal/compress/flate/dict_decoder.go

@@ -7,19 +7,19 @@ package flate
 // dictDecoder implements the LZ77 sliding dictionary as used in decompression.
 // LZ77 decompresses data through sequences of two forms of commands:
 //
-//	* Literal insertions: Runs of one or more symbols are inserted into the data
+//   - Literal insertions: Runs of one or more symbols are inserted into the data
-//	stream as is. This is accomplished through the writeByte method for a
+//     stream as is. This is accomplished through the writeByte method for a
-//	single symbol, or combinations of writeSlice/writeMark for multiple symbols.
+//     single symbol, or combinations of writeSlice/writeMark for multiple symbols.
-//	Any valid stream must start with a literal insertion if no preset dictionary
+//     Any valid stream must start with a literal insertion if no preset dictionary
-//	is used.
+//     is used.
 //
-//	* Backward copies: Runs of one or more symbols are copied from previously
+//   - Backward copies: Runs of one or more symbols are copied from previously
-//	emitted data. Backward copies come as the tuple (dist, length) where dist
+//     emitted data. Backward copies come as the tuple (dist, length) where dist
-//	determines how far back in the stream to copy from and length determines how
+//     determines how far back in the stream to copy from and length determines how
-//	many bytes to copy. Note that it is valid for the length to be greater than
+//     many bytes to copy. Note that it is valid for the length to be greater than
-//	the distance. Since LZ77 uses forward copies, that situation is used to
+//     the distance. Since LZ77 uses forward copies, that situation is used to
-//	perform a form of run-length encoding on repeated runs of symbols.
+//     perform a form of run-length encoding on repeated runs of symbols.
-//	The writeCopy and tryWriteCopy are used to implement this command.
+//     The writeCopy and tryWriteCopy are used to implement this command.
 //
 // For performance reasons, this implementation performs little to no sanity
 // checks about the arguments. As such, the invariants documented for each

image/internal/compress/flate/huffman_bit_writer.go

@@ -194,9 +194,9 @@ func (w *huffmanBitWriter) writeBytes(bytes []byte) {
 // Codes 0-15 are single byte codes. Codes 16-18 are followed by additional
 // information. Code badCode is an end marker
 //
-//  numLiterals      The number of literals in literalEncoding
+//	numLiterals      The number of literals in literalEncoding
-//  numOffsets       The number of offsets in offsetEncoding
+//	numOffsets       The number of offsets in offsetEncoding
-//  litenc, offenc   The literal and offset encoder to use
+//	litenc, offenc   The literal and offset encoder to use
 func (w *huffmanBitWriter) generateCodegen(numLiterals int, numOffsets int, litEnc, offEnc *huffmanEncoder) {
 	for i := range w.codegenFreq {
 		w.codegenFreq[i] = 0
@@ -353,9 +353,9 @@ func (w *huffmanBitWriter) writeCode(c hcode) {
 
 // Write the header of a dynamic Huffman block to the output stream.
 //
-//  numLiterals  The number of literals specified in codegen
+//	numLiterals  The number of literals specified in codegen
-//  numOffsets   The number of offsets specified in codegen
+//	numOffsets   The number of offsets specified in codegen
-//  numCodegens  The number of codegens used in codegen
+//	numCodegens  The number of codegens used in codegen
 func (w *huffmanBitWriter) writeDynamicHeader(numLiterals int, numOffsets int, numCodegens int, isEof bool) {
 	if w.err != nil {
 		return

image/internal/compress/flate/huffman_code.go

@@ -124,13 +124,18 @@ const maxBitsLimit = 16
 // The cases of 0, 1, and 2 literals are handled by special case code.
 //
 // list  An array of the literals with non-zero frequencies
-//             and their associated frequencies. The array is in order of increasing
+//
-//             frequency, and has as its last element a special element with frequency
+//	and their associated frequencies. The array is in order of increasing
-//             MaxInt32
+//	frequency, and has as its last element a special element with frequency
+//	MaxInt32
+//
 // maxBits     The maximum number of bits that should be used to encode any literal.
-//             Must be less than 16.
+//
+//	Must be less than 16.
+//
 // return      An integer array in which array[i] indicates the number of literals
-//             that should be encoded in i bits.
+//
+//	that should be encoded in i bits.
 func (h *huffmanEncoder) bitCounts(list []literalNode, maxBits int32) []int32 {
 	if maxBits >= maxBitsLimit {
 		panic("flate: maxBits too large")

image/jpeg/writer.go

@@ -481,25 +481,25 @@ func scale(dst *block, src *[4]block) {
 }
 
 // sosHeaderY is the SOS marker "\xff\xda" followed by 8 bytes:
-//	- the marker length "\x00\x08",
+//   - the marker length "\x00\x08",
-//	- the number of components "\x01",
+//   - the number of components "\x01",
-//	- component 1 uses DC table 0 and AC table 0 "\x01\x00",
+//   - component 1 uses DC table 0 and AC table 0 "\x01\x00",
-//	- the bytes "\x00\x3f\x00". Section B.2.3 of the spec says that for
+//   - the bytes "\x00\x3f\x00". Section B.2.3 of the spec says that for
-//	  sequential DCTs, those bytes (8-bit Ss, 8-bit Se, 4-bit Ah, 4-bit Al)
+//     sequential DCTs, those bytes (8-bit Ss, 8-bit Se, 4-bit Ah, 4-bit Al)
-//	  should be 0x00, 0x3f, 0x00<<4 | 0x00.
+//     should be 0x00, 0x3f, 0x00<<4 | 0x00.
 var sosHeaderY = []byte{
 	0xff, 0xda, 0x00, 0x08, 0x01, 0x01, 0x00, 0x00, 0x3f, 0x00,
 }
 
 // sosHeaderYCbCr is the SOS marker "\xff\xda" followed by 12 bytes:
-//	- the marker length "\x00\x0c",
+//   - the marker length "\x00\x0c",
-//	- the number of components "\x03",
+//   - the number of components "\x03",
-//	- component 1 uses DC table 0 and AC table 0 "\x01\x00",
+//   - component 1 uses DC table 0 and AC table 0 "\x01\x00",
-//	- component 2 uses DC table 1 and AC table 1 "\x02\x11",
+//   - component 2 uses DC table 1 and AC table 1 "\x02\x11",
-//	- component 3 uses DC table 1 and AC table 1 "\x03\x11",
+//   - component 3 uses DC table 1 and AC table 1 "\x03\x11",
-//	- the bytes "\x00\x3f\x00". Section B.2.3 of the spec says that for
+//   - the bytes "\x00\x3f\x00". Section B.2.3 of the spec says that for
-//	  sequential DCTs, those bytes (8-bit Ss, 8-bit Se, 4-bit Ah, 4-bit Al)
+//     sequential DCTs, those bytes (8-bit Ss, 8-bit Se, 4-bit Ah, 4-bit Al)
-//	  should be 0x00, 0x3f, 0x00<<4 | 0x00.
+//     should be 0x00, 0x3f, 0x00<<4 | 0x00.
 var sosHeaderYCbCr = []byte{
 	0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02,
 	0x11, 0x03, 0x11, 0x00, 0x3f, 0x00,

image/png/reader.go

@@ -326,7 +326,9 @@ func (d *decoder) parsetRNS(length uint32) error {
 
 // Read presents one or more IDAT chunks as one continuous stream (minus the
 // intermediate chunk headers and footers). If the PNG data looked like:
-//   ... len0 IDAT xxx crc0 len1 IDAT yy crc1 len2 IEND crc2
+//
+//	... len0 IDAT xxx crc0 len1 IDAT yy crc1 len2 IEND crc2
+//
 // then this reader presents xxxyy. For well-formed PNG data, the decoder state
 // immediately before the first Read call is that d.r is positioned between the
 // first IDAT and xxx, and the decoder state immediately after the last Read

ina260/ina260.go

@@ -43,7 +43,6 @@ func New(bus drivers.I2C) Device {
 // * VoltConvTime = CONVTIME_1100USEC
 // * CurrentConvTime = CONVTIME_1100USEC
 // * Mode = MODE_CONTINUOUS | MODE_VOLTAGE | MODE_CURRENT
-//
 func (d *Device) Configure(cfg Config) {
 	var val uint16
 

is31fl3731/is31fl3731.go

@@ -7,11 +7,12 @@
 //     https://www.adafruit.com/product/3163
 //
 // Datasheet:
-//    https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf
+//
+//	https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf
 //
 // This driver inspired by Adafruit Python driver:
-//    https://github.com/adafruit/Adafruit_CircuitPython_IS31FL3731
 //
+//	https://github.com/adafruit/Adafruit_CircuitPython_IS31FL3731
 package is31fl3731
 
 import (

is31fl3731/is31fl3731_acw15x7.go

@@ -16,29 +16,28 @@ type DeviceAdafruitCharlieWing15x7 struct {
 // enableLEDs enables only LEDs that are soldered on the Adafruit CharlieWing
 // board. The board has following LEDs matrix layout:
 //
-//   "o" - connected (soldered) LEDs
+//	"o" - connected (soldered) LEDs
-//   "x" - not connected LEDs
+//	"x" - not connected LEDs
-//
-//     + - - - - - - - - - - - - - - +
-//     | + - - - - - - - - - - - - + |
-//     | |                         | |
-//     | |                         v v
-//   +---------------------------------+
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | o o o o o o o o o o o o o o o x |
-//   | x x x x x x x x x x x x x x x x |
-//   +---------------------------------+
-//     ^ ^                         | |
-//     | |                 ... - - + |
-//     | + - - - - - - - - - - - - - +
-//     |
-//     start (address 0x00)
 //
+//	  + - - - - - - - - - - - - - - +
+//	  | + - - - - - - - - - - - - + |
+//	  | |                         | |
+//	  | |                         v v
+//	+---------------------------------+
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| o o o o o o o o o o o o o o o x |
+//	| x x x x x x x x x x x x x x x x |
+//	+---------------------------------+
+//	  ^ ^                         | |
+//	  | |                 ... - - + |
+//	  | + - - - - - - - - - - - - - +
+//	  |
+//	  start (address 0x00)
 func (d *DeviceAdafruitCharlieWing15x7) enableLEDs() (err error) {
 	for frame := FRAME_0; frame <= FRAME_7; frame++ {
 		err = d.selectCommand(frame)

l293x/l293x.go

@@ -2,7 +2,6 @@
 // typically used to control DC motors.
 //
 // Datasheet: https://www.ti.com/lit/ds/symlink/l293d.pdf
-//
 package l293x // import "tinygo.org/x/drivers/l293x"
 
 import (

l9110x/l9110x.go

@@ -2,7 +2,6 @@
 // typically used to control DC motors.
 //
 // Datasheet: https://www.elecrow.com/download/datasheet-l9110.pdf
-//
 package l9110x // import "tinygo.org/x/drivers/l9110x"
 
 import (

lis2mdl/lis2mdl.go

@@ -2,7 +2,6 @@
 // a magnetic sensor which is included on BBC micro:bit v1.5.
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lis2mdl.pdf
-//
 package lis2mdl // import "tinygo.org/x/drivers/lis2mdl"
 
 import (

lis3dh/lis3dh.go

@@ -1,7 +1,6 @@
 // Package lis3dh provides a driver for the LIS3DH digital accelerometer.
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lis3dh.pdf
-//
 package lis3dh // import "tinygo.org/x/drivers/lis3dh"
 
 import "tinygo.org/x/drivers"

lps22hb/lps22hb.go

@@ -1,7 +1,6 @@
 // Package lps22hb implements a driver for LPS22HB, a MEMS nano pressure sensor.
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/dm00140895.pdf
-//
 package lps22hb
 
 import (

lsm303agr/lsm303agr.go

@@ -2,7 +2,6 @@
 // a 3 axis accelerometer/magnetic sensor which is included on BBC micro:bits v1.5.
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lsm303agr.pdf
-//
 package lsm303agr // import "tinygo.org/x/drivers/lsm303agr"
 
 import (

lsm6ds3/lsm6ds3.go

@@ -2,7 +2,6 @@
 // Measurement Unit (IMU)
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lsm6ds3.pdf
-//
 package lsm6ds3 // import "tinygo.org/x/drivers/lsm6ds3"
 
 import (

lsm6ds3tr/lsm6ds3tr.go

@@ -2,7 +2,6 @@
 // a 6 axis Inertial Measurement Unit (IMU)
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lsm6ds3tr.pdf
-//
 package lsm6ds3tr // import "tinygo.org/x/drivers/lsm6ds3tr"
 
 import (

lsm6dsox/lsm6dsox.go

@@ -2,7 +2,6 @@
 // a 6 axis Inertial Measurement Unit (IMU)
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
-//
 package lsm6dsox // import "tinygo.org/x/drivers/lsm6dsox"
 
 import (

lsm9ds1/lsm9ds1.go

@@ -1,7 +1,6 @@
 // LSM9DS1, 9 axis Inertial Measurement Unit (IMU)
 //
 // Datasheet: https://www.st.com/resource/en/datasheet/lsm6ds3.pdf
-//
 package lsm9ds1 // import "tinygo.org/x/drivers/lsm9ds1"
 
 import (

mag3110/mag3110.go

@@ -2,7 +2,6 @@
 // Freescale/NXP.
 //
 // Datasheet: https://www.nxp.com/docs/en/data-sheet/MAG3110.pdf
-//
 package mag3110 // import "tinygo.org/x/drivers/mag3110"
 
 import "tinygo.org/x/drivers"

mcp23017/device.go

@@ -133,7 +133,7 @@ func (d *Device) GetPins() (Pins, error) {
 //
 // That is, it does the equivalent of:
 //
-// 	for i := 0; i < PinCount; i++ {
+//	for i := 0; i < PinCount; i++ {
 //		if mask.Get(i) {
 //			d.Pin(i).Set(pins.Get(i))
 //		}

mcp23017/multidevice.go

@@ -93,7 +93,7 @@ func (devs Devices) GetPins(pins PinSlice) error {
 //
 // That is, it does the equivalent of:
 //
-// 	for i := 0; i < PinCount*len(devs); i++ {
+//	for i := 0; i < PinCount*len(devs); i++ {
 //		if mask.Get(i) {
 //			d.Pin(i).Set(pins.Get(i))
 //		}

mcp2515/registers.go

@@ -1,7 +1,6 @@
 // Package mcp2515 implements a driver for the MCP2515 CAN Controller.
 //
 // Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Stand-Alone-CAN-Controller-with-SPI-20001801J.pdf
-//
 package mcp2515 // import "tinygo.org/x/drivers/mcp2515"
 
 const DebugEn = 0

mcp3008/mcp3008.go

@@ -1,7 +1,6 @@
 // Package mcp3008 implements a driver for the MCP3008 Analog to Digital Converter.
 //
 // Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf
-//
 package mcp3008 // import "tinygo.org/x/drivers/mcp3008"
 
 import (

microbitmatrix/microbitmatrix-v1.go

@@ -4,7 +4,6 @@
 // Package microbitmatrix implements a driver for the BBC micro:bit's LED matrix.
 //
 // Schematic: https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf
-//
 package microbitmatrix // import "tinygo.org/x/drivers/microbitmatrix"
 
 import (

microbitmatrix/microbitmatrix-v2.go

@@ -4,7 +4,6 @@
 // Package microbitmatrix implements a driver for the BBC micro:bit version 2 LED matrix.
 //
 // Schematic:
-//
 package microbitmatrix // import "tinygo.org/x/drivers/microbitmatrix"
 
 import (

microbitmatrix/microbitmatrix.go

@@ -1,7 +1,6 @@
 // Package microbitmatrix implements a driver for the BBC micro:bit's LED matrix.
 //
 // Schematic: https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf
-//
 package microbitmatrix // import "tinygo.org/x/drivers/microbitmatrix"
 
 import (

microphone/microphone.go

@@ -2,7 +2,6 @@
 // For example, the Adafruit PDM MEMS breakout board (https://www.adafruit.com/product/3492)
 //
 // Datasheet: https://cdn-learn.adafruit.com/assets/assets/000/049/977/original/MP34DT01-M.pdf
-//
 package microphone // import "tinygo.org/x/drivers/microphone"
 
 import (
@@ -141,7 +140,6 @@ func (d *Device) GetSoundPressure() (int32, int32) {
 // for that sample.
 //
 // For more information: https://en.wikipedia.org/wiki/Sinc_filter
-//
 var sincfilter = [quantizeSteps]uint16{
 	0, 2, 9, 21, 39, 63, 94, 132,
 	179, 236, 302, 379, 467, 565, 674, 792,

mma8653/mma8653.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://www.nxp.com/docs/en/data-sheet/MMA8653FC.pdf
-//
 package mma8653 // import "tinygo.org/x/drivers/mma8653"
 
 import "tinygo.org/x/drivers"

mpu6050/mpu6050.go

@@ -4,7 +4,6 @@
 // Datasheets:
 // https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf
 // https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Register-Map1.pdf
-//
 package mpu6050 // import "tinygo.org/x/drivers/mpu6050"
 
 import "tinygo.org/x/drivers"

net/http/client.go

@@ -33,7 +33,6 @@ import (
 // with the expectation that the Jar will insert those mutated cookies
 // with the updated values (assuming the origin matches).
 // If Jar is nil, the initial cookies are forwarded without change.
-//
 type Client struct {
 	// Transport specifies the mechanism by which individual
 	// HTTP requests are made.
@@ -125,11 +124,11 @@ type RoundTripper interface {
 // the following redirect codes, Get follows the redirect, up to a
 // maximum of 10 redirects:
 //
-//    301 (Moved Permanently)
+//	301 (Moved Permanently)
-//    302 (Found)
+//	302 (Found)
-//    303 (See Other)
+//	303 (See Other)
-//    307 (Temporary Redirect)
+//	307 (Temporary Redirect)
-//    308 (Permanent Redirect)
+//	308 (Permanent Redirect)
 //
 // An error is returned if there were too many redirects or if there
 // was an HTTP protocol error. A non-2xx response doesn't cause an
@@ -152,11 +151,11 @@ func Get(url string) (resp *Response, err error) {
 // following redirect codes, Get follows the redirect after calling the
 // Client's CheckRedirect function:
 //
-//    301 (Moved Permanently)
+//	301 (Moved Permanently)
-//    302 (Found)
+//	302 (Found)
-//    303 (See Other)
+//	303 (See Other)
-//    307 (Temporary Redirect)
+//	307 (Temporary Redirect)
-//    308 (Permanent Redirect)
+//	308 (Permanent Redirect)
 //
 // An error is returned if the Client's CheckRedirect function fails
 // or if there was an HTTP protocol error. A non-2xx response doesn't

net/http/cookie.go

@@ -358,9 +358,11 @@ func sanitizeCookieName(n string) string {
 // https://tools.ietf.org/html/rfc6265#section-4.1.1
 // cookie-value      = *cookie-octet / ( DQUOTE *cookie-octet DQUOTE )
 // cookie-octet      = %x21 / %x23-2B / %x2D-3A / %x3C-5B / %x5D-7E
-//           ; US-ASCII characters excluding CTLs,
+//
-//           ; whitespace DQUOTE, comma, semicolon,
+//	; US-ASCII characters excluding CTLs,
-//           ; and backslash
+//	; whitespace DQUOTE, comma, semicolon,
+//	; and backslash
+//
 // We loosen this as spaces and commas are common in cookie values
 // but we produce a quoted cookie-value if and only if v contains
 // commas or spaces.

net/http/cookiejar/jar.go

@@ -19,9 +19,9 @@ import (
 )
 
 // PublicSuffixList provides the public suffix of a domain. For example:
-//      - the public suffix of "example.com" is "com",
+//   - the public suffix of "example.com" is "com",
-//      - the public suffix of "foo1.foo2.foo3.co.uk" is "co.uk", and
+//   - the public suffix of "foo1.foo2.foo3.co.uk" is "co.uk", and
-//      - the public suffix of "bar.pvt.k12.ma.us" is "pvt.k12.ma.us".
+//   - the public suffix of "bar.pvt.k12.ma.us" is "pvt.k12.ma.us".
 //
 // Implementations of PublicSuffixList must be safe for concurrent use by
 // multiple goroutines.

net/http/response.go

@@ -105,8 +105,11 @@ func (r *Response) Cookies() []*Cookie {
 }
 
 // RFC 7234, section 5.4: Should treat
+//
 //	Pragma: no-cache
+//
 // like
+//
 //	Cache-Control: no-cache
 func fixPragmaCacheControl(header Header) {
 	if hp, ok := header["Pragma"]; ok && len(hp) > 0 && hp[0] == "no-cache" {

net/http/server.go

@@ -142,7 +142,7 @@ func Error(w ResponseWriter, error string, code int) {
 func NotFound(w ResponseWriter, r *Request) { Error(w, "404 page not found", StatusNotFound) }
 
 // NotFoundHandler returns a simple request handler
-// that replies to each request with a ``404 page not found'' reply.
+// that replies to each request with a “404 page not found” reply.
 func NotFoundHandler() Handler { return HandlerFunc(NotFound) }
 
 // StripPrefix returns a handler that serves HTTP requests by removing the
@@ -435,7 +435,7 @@ func (mux *ServeMux) shouldRedirectRLocked(host, path string) bool {
 // the pattern that will match after following the redirect.
 //
 // If there is no registered handler that applies to the request,
-// Handler returns a ``page not found'' handler and an empty pattern.
+// Handler returns a “page not found” handler and an empty pattern.
 func (mux *ServeMux) Handler(r *Request) (h Handler, pattern string) {
 
 	// CONNECT requests are not canonicalized.

net/mqtt/paho.go

@@ -42,9 +42,11 @@ const (
 // with an MQTT server using non-blocking methods that allow work
 // to be done in the background.
 // An application may connect to an MQTT server using:
-//   A plain TCP socket
+//
-//   A secure SSL/TLS socket
+//	A plain TCP socket
-//   A websocket
+//	A secure SSL/TLS socket
+//	A websocket
+//
 // To enable ensured message delivery at Quality of Service (QoS) levels
 // described in the MQTT spec, a message persistence mechanism must be
 // used. This is done by providing a type which implements the Store

net/net.go

@@ -234,7 +234,6 @@ func (c *SerialConn) SetWriteDeadline(t time.Time) error {
 // ResolveTCPAddr returns an address of TCP end point.
 //
 // The network must be a TCP network name.
-//
 func ResolveTCPAddr(network, address string) (*TCPAddr, error) {
 	// TODO: make sure network is 'tcp'
 	// separate domain from port, if any
@@ -257,7 +256,6 @@ func ResolveTCPAddr(network, address string) (*TCPAddr, error) {
 // ResolveUDPAddr returns an address of UDP end point.
 //
 // The network must be a UDP network name.
-//
 func ResolveUDPAddr(network, address string) (*UDPAddr, error) {
 	// TODO: make sure network is 'udp'
 	// separate domain from port, if any

pca9685/pca9685.go

@@ -51,7 +51,7 @@ func (d Dev) Configure(cfg PWMConfig) error {
 // SetPeriod updates the period of this PWM integrated circuit in nanoseconds.
 // To set a particular frequency, use the following formula:
 //
-//     period = 1e9 / frequency
+//	period = 1e9 / frequency
 //
 // In the equation above frequency is in Hertz.
 //
@@ -91,7 +91,9 @@ func (d Dev) Top() uint32 {
 // Set sets the `on` value of a PWM channel in the range [0..15].
 // Max value `on` can take is 4095.
 // Example:
-//  d.Set(1, d.Top()/4)
+//
+//	d.Set(1, d.Top()/4)
+//
 // sets the dutycycle of second (LED1) channel to 25%.
 func (d Dev) Set(channel uint8, on uint32) {
 	if on > maxtop {
@@ -101,7 +103,8 @@ func (d Dev) Set(channel uint8, on uint32) {
 }
 
 // SetAll sets all PWM signals to a ON value. Equivalent of calling
-//  Dev.Set(pca9685.ALLLED, value)
+//
+//	Dev.Set(pca9685.ALLLED, value)
 func (d Dev) SetAll(on uint32) {
 	d.Set(ALLLED, on)
 }
@@ -140,8 +143,9 @@ func (d Dev) SetAI(ai bool) error {
 }
 
 // SetDrive configures PWM output connection in MODE2 register.
-//  false: The 16 LEDn outputs are configured with an open-drain structure.
+//
-//  true: The 16 LEDn outputs are configured with a totem pole structure.
+//	false: The 16 LEDn outputs are configured with an open-drain structure.
+//	true: The 16 LEDn outputs are configured with a totem pole structure.
 func (d Dev) SetDrive(outdrv bool) error {
 	err := d.readReg(MODE2, d.buf[:1])
 	if err != nil {
@@ -156,10 +160,11 @@ func (d Dev) SetDrive(outdrv bool) error {
 }
 
 // Sleep sets/unsets SLEEP bit in MODE1.
-//  if sleepEnabled
+//
-//    Stops PWM. Allows writing to PRE_SCALE register.
+//	if sleepEnabled
-//  else
+//	  Stops PWM. Allows writing to PRE_SCALE register.
-//    wakes PCA9685. Resumes PWM.
+//	else
+//	  wakes PCA9685. Resumes PWM.
 func (d Dev) Sleep(sleepEnabled bool) error {
 	err := d.readReg(MODE1, d.buf[:1])
 	if err != nil {

pcd8544/pcd8544.go

@@ -1,7 +1,6 @@
 // Package pcd8544 implements a driver for the PCD8544 48x84 pixels matrix LCD, used in Nokia's 5110 and 3310 phones.
 //
 // Datasheet: http://eia.udg.edu/~forest/PCD8544_1.pdf
-//
 package pcd8544 // import "tinygo.org/x/drivers/pcd8544"
 
 import (

scd4x/scd4x.go

@@ -5,7 +5,6 @@
 // This driver is heavily influenced by the scd4x code from Adafruit for CircuitPython:
 // https://github.com/adafruit/Adafruit_CircuitPython_SCD4X
 // Thank you!
-//
 package scd4x // import "tinygo.org/x/drivers/scd4x"
 
 import (

semihosting/semihosting.go

@@ -4,7 +4,7 @@
 // If you want to use it in OpenOCD, you have to enable it first with the
 // following command:
 //
-//     arm semihosting enable
+//	arm semihosting enable
 package semihosting
 
 import (

sht3x/sht3x.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf
-//
 package sht3x // import "tinygo.org/x/drivers/sht3x"
 
 import (

shtc3/shtc3.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf
-//
 package shtc3 // import "tinygo.org/x/drivers/shtc3"
 
 import (

ssd1289/ssd1289.go

@@ -1,7 +1,6 @@
 // Package ssd1289 implements a driver for the SSD1289 led matrix controller as packaged on the TFT_320QVT board
 //
 // Datasheet: http://aitendo3.sakura.ne.jp/aitendo_data/product_img/lcd/tft2/M032C1289TP/3.2-SSD1289.pdf
-//
 package ssd1289
 
 import (

ssd1306/ssd1306.go

@@ -1,7 +1,6 @@
 // Package ssd1306 implements a driver for the SSD1306 led matrix controller, it comes in various colors and screen sizes.
 //
 // Datasheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
-//
 package ssd1306 // import "tinygo.org/x/drivers/ssd1306"
 
 import (

ssd1331/ssd1331.go

@@ -1,7 +1,6 @@
 // Package ssd1331 implements a driver for the SSD1331 TFT color displays.
 //
 // Datasheet: https://www.crystalfontz.com/controllers/SolomonSystech/SSD1331/381/
-//
 package ssd1331 // import "tinygo.org/x/drivers/ssd1331"
 
 import (

ssd1351/ssd1351.go

@@ -1,7 +1,6 @@
 // Package ssd1351 implements a driver for the SSD1351 OLED color displays.
 //
 // Datasheet: https://download.mikroe.com/documents/datasheets/ssd1351-revision-1.3.pdf
-//
 package ssd1351 // import "tinygo.org/x/drivers/ssd1351"
 
 import (

st7735/st7735.go

@@ -1,7 +1,6 @@
 // Package st7735 implements a driver for the ST7735 TFT displays, it comes in various screen sizes.
 //
 // Datasheet: https://www.crystalfontz.com/controllers/Sitronix/ST7735R/319/
-//
 package st7735 // import "tinygo.org/x/drivers/st7735"
 
 import (

st7789/st7789.go

@@ -1,8 +1,8 @@
 // Package st7789 implements a driver for the ST7789 TFT displays, it comes in various screen sizes.
 //
 // Datasheets: https://cdn-shop.adafruit.com/product-files/3787/3787_tft_QT154H2201__________20190228182902.pdf
-//             http://www.newhavendisplay.com/appnotes/datasheets/LCDs/ST7789V.pdf
 //
+//	http://www.newhavendisplay.com/appnotes/datasheets/LCDs/ST7789V.pdf
 package st7789 // import "tinygo.org/x/drivers/st7789"
 
 import (
@@ -176,7 +176,6 @@ func (d *Device) Sync() {
 // NOTE: Use GetHighestScanLine and GetLowestScanLine to obtain the highest
 // and lowest useful values. Values are affected by front and back porch
 // vsync settings (derived from VSyncLines configuration option).
-//
 func (d *Device) SyncToScanLine(scanline uint16) {
 	scan := d.GetScanLine()
 

sx126x/spi_stm32wl.go

@@ -26,7 +26,7 @@ func New(spi drivers.SPI) *Device {
 	return &d
 }
 
-//SpiSetNss Sets the NSS line
+// SpiSetNss Sets the NSS line
 func (d *Device) SpiSetNss(state bool) {
 	if state {
 		stm32.PWR.SUBGHZSPICR.SetBits(stm32.PWR_SUBGHZSPICR_NSS)

sx126x/sx126x.go

@@ -96,9 +96,11 @@ func timeoutMsToRtcSteps(timeoutMs uint32) uint32 {
 }
 
 // --------------------------------------------------
-//  Channel and events
+//
+//	Channel and events
+//
 // --------------------------------------------------
-//NewRadioEvent() returns a new RadioEvent that can be used in the RadioChannel
+// NewRadioEvent() returns a new RadioEvent that can be used in the RadioChannel
 func NewRadioEvent(eType int, irqStatus uint16, eData []byte) RadioEvent {
 	r := RadioEvent{EventType: eType, IRQStatus: irqStatus, EventData: eData}
 	return r
@@ -573,7 +575,7 @@ func (d *Device) SetLoraCrc(enable bool) {
 	}
 }
 
-//SetLoraSpreadingFactor setc surrent Lora Spreading Factor
+// SetLoraSpreadingFactor setc surrent Lora Spreading Factor
 // NB: Change will be applied at next RX / TX
 func (d *Device) SetLoraSpreadingFactor(sf uint8) {
 	d.loraConf.Sf = sf

tester/tester.go

@@ -1,7 +1,6 @@
 // Package tester contains mock structs to make it easier to test I2C devices.
 //
 // TODO: info on how to use this.
-//
 package tester // import "tinygo.org/x/drivers/tester"
 
 // Failer is used by the I2CDevice type to abort when it's used in

thermistor/thermistor.go

@@ -13,17 +13,16 @@
 // To use with other thermistors adjust the BCoefficient and NominalTemperature
 // values to match the specific thermistor you wish to use.
 //
-//			sensor.NominalTemperature = 25
+//	sensor.NominalTemperature = 25
-//			sensor.BCoefficient = 3950
+//	sensor.BCoefficient = 3950
 //
 // Set the SeriesResistor and NominalResistance based on the microcontroller voltage and
 // circuit that you have in use. Set HighSide based on if the thermistor is connected from
 // the ADC pin to the powered side (true) or to ground (false).
 //
-//			sensor.SeriesResistor = 10000
+//	sensor.SeriesResistor = 10000
-//			sensor.NominalResistance = 10000
+//	sensor.NominalResistance = 10000
-//			sensor.HighSide = true
+//	sensor.HighSide = true
-//
 package thermistor // import "tinygo.org/x/drivers/thermistor"
 
 import (

tm1637/tm1637.go

@@ -1,7 +1,6 @@
 // Package tm1637 provides a driver for the TM1637 4-digit 7-segment LED display.
 //
 // Datasheet: https://www.mcielectronics.cl/website_MCI/static/documents/Datasheet_TM1637.pdf
-//
 package tm1637
 
 import (

tone/tone.go

@@ -45,7 +45,7 @@ func (s Speaker) Stop() {
 // SetPeriod sets the period for the signal in nanoseconds. Use the following
 // formula to convert frequency to period:
 //
-//     period = 1e9 / frequency
+//	period = 1e9 / frequency
 //
 // You can also use s.SetNote() instead for MIDI note numbers.
 func (s Speaker) SetPeriod(period uint64) {

uc8151/uc8151.go

@@ -2,7 +2,6 @@
 //
 // Inspired by https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151/uc8151.cpp
 // Datasheet: https://www.buydisplay.com/download/ic/UC8151C.pdf
-//
 package uc8151 // import "tinygo.org/x/drivers/uc8151"
 
 import (

veml6070/veml6070.go

@@ -5,7 +5,6 @@
 // https://www.vishay.com/docs/84277/veml6070.pdf
 // Application Notes:
 // https://www.vishay.com/docs/84310/designingveml6070.pdf
-//
 package veml6070 // import "tinygo.org/x/drivers/veml6070"
 
 import (

vl53l1x/vl53l1x.go

@@ -6,7 +6,6 @@
 // This driver was based on the library https://github.com/pololu/vl53l1x-arduino
 // and ST's VL53L1X API (STSW-IMG007)
 // https://www.st.com/content/st_com/en/products/embedded-software/proximity-sensors-software/stsw-img007.html
-//
 package vl53l1x // import "tinygo.org/x/drivers/vl53l1x"
 
 import (

vl6180x/vl6180x.go

@@ -5,7 +5,6 @@
 // This driver was based on the library https://github.com/adafruit/Adafruit_VL6180X
 // and document 'AN4545 VL6180X basic ranging application note':
 // https://www.st.com/resource/en/application_note/an4545-vl6180x-basic-ranging-application-note-stmicroelectronics.pdf
-//
 package vl6180x // import "tinygo.org/x/drivers/vl6180x"
 
 import (

waveshare-epd/epd2in13/epd2in13.go

@@ -1,7 +1,6 @@
 // Package epd2in13 implements a driver for Waveshare 2.13in black and white e-paper device.
 //
 // Datasheet: https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf
-//
 package epd2in13 // import "tinygo.org/x/drivers/waveshare-epd/epd2in13"
 
 import (

waveshare-epd/epd2in13x/epd2in13x.go

@@ -1,7 +1,6 @@
 // Package epd2in13x implements a driver for Waveshare 2.13in (B & C versions) tri-color e-paper device.
 //
 // Datasheet: https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf
-//
 package epd2in13x // import "tinygo.org/x/drivers/waveshare-epd/epd2in13x"
 
 import (

waveshare-epd/epd2in9/epd2in9.go

@@ -3,12 +3,12 @@
 // Note: this is for the V1 device (using IL3820), the V2 device uses a different chipset.
 //
 // Datasheets:
-//   https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf
+//
-//   https://www.smart-prototyping.com/image/data/9_Modules/EinkDisplay/GDE029A1/IL3820.pdf
+//	https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf
+//	https://www.smart-prototyping.com/image/data/9_Modules/EinkDisplay/GDE029A1/IL3820.pdf
 //
 // This implementation is essentially a copy of the 2in13 driver with the correct LUTs and
 // default size for the 2.9in device.
-//
 package epd2in9 // import "tinygo.org/x/drivers/waveshare-epd/epd2in9"
 
 import (

waveshare-epd/epd4in2/epd4in2.go

@@ -1,11 +1,11 @@
 // Package epd4in2 implements a driver for Waveshare 4.2in black and white e-paper device.
 //
 // Derived from:
-//   https://github.com/tinygo-org/drivers/tree/master/waveshare-epd
+//
-//   https://github.com/waveshare/e-Paper/blob/master/Arduino/epd4in2/epd4in2.cpp
+//	https://github.com/tinygo-org/drivers/tree/master/waveshare-epd
+//	https://github.com/waveshare/e-Paper/blob/master/Arduino/epd4in2/epd4in2.cpp
 //
 // Datasheet: https://www.waveshare.com/wiki/4.2inch_e-Paper_Module
-//
 package epd4in2
 
 import (

wifinina/wifinina.go

@@ -3,7 +3,6 @@
 //
 // In order to use this driver, the ESP32 must be flashed with specific firmware from Arduino.
 // For more information: https://github.com/arduino/nina-fw
-//
 package wifinina // import "tinygo.org/x/drivers/wifinina"
 
 import (
@@ -265,7 +264,6 @@ func (err Error) Error() string {
 // |___________|______|______|_________|___________|________|____|_________|
 // |   8 bit   | 1bit | 7bit |  8bit   |   8bit    | nbytes | .. |   8bit  |
 // |___________|______|______|_________|___________|________|____|_________|
-//
 type command struct {
 	cmd       uint8
 	reply     bool