mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2026-08-18 21:53:59 +00:00
VasylSamoilov
fc5beb0c09
- Fix long-address numeric message decoding: read body[0] from Vy (j+1) for multi-word messages, from w1 for single-word. Fix MF word count for long addresses (n_field words, not n_field+1). - Fix long-address short message: read 5 additional BCD digits from Vy for 8-digit decode. - Fix BCD table: index 10 is '.' (dot) not ' ' (space) in both RX and TX. - Clean up address decode: identify address type by value range per Table 3.8.1-1. Remove is_group/is_temp_group from packet structs. - Rename SMSG to SHORT. Format message payload directly in baseband: TONE, NUM abc, SRC N, SRC N N=M R=R, RESERVED hex. - Add BIW1 heartbeat packet (biw_field=0xFF) on every decoded frame. - Move timezone table to file scope, simplify console log_message, add No signal initial status, simplify serial BIW output format.
61 lines
2.0 KiB
C++
61 lines
2.0 KiB
C++
#ifndef __FLEX_DEFS_H__
|
|
#define __FLEX_DEFS_H__
|
|
|
|
#include <cstdint>
|
|
#include <array>
|
|
#include "baseband.hpp"
|
|
|
|
namespace flex {
|
|
|
|
enum class FlexMode : uint8_t {
|
|
FLEX_1600_2FSK,
|
|
FLEX_3200_2FSK,
|
|
FLEX_3200_4FSK,
|
|
FLEX_6400_4FSK
|
|
};
|
|
|
|
struct FlexStats {
|
|
uint32_t symbols_processed;
|
|
uint32_t total_frames;
|
|
uint32_t correct_frames;
|
|
};
|
|
|
|
struct FlexPacket {
|
|
uint32_t bitrate; // 1600, 3200, 6400
|
|
uint64_t capcode; // supports long addresses (up to 4,297,068,542)
|
|
uint32_t function; // 0-3 (or BIW word index for type=9)
|
|
uint32_t type; // 0=SEC 1=INS 2=TON 3=NUM 4=SNUM 5=ALN 6=HEX 7=NNUM 8=SHORT 9=BIW
|
|
char message[256]; // Decoded message text (not used for BIW)
|
|
uint32_t status; // 0=OK, other=Errors
|
|
uint8_t cycle; // FIW cycle (0-14)
|
|
uint8_t frame; // FIW frame (0-127)
|
|
char phase; // 'A','B','C','D'
|
|
uint8_t is_inverted; // 1=inverted polarity
|
|
uint8_t addr_type; // 0=short 1=long 2=temp 3=oper 4=net 5=info 6=rsvd 7=unk
|
|
|
|
// Fragment flags (ALN/SEC/HEX)
|
|
uint8_t frag; // F field: 3=first, 0/1/2=continuation
|
|
uint8_t more_frag; // C bit
|
|
uint8_t seq; // N field (0-63)
|
|
uint8_t is_new; // R bit
|
|
uint8_t maildrop; // M bit
|
|
uint8_t sig; // 7-bit signature
|
|
uint8_t has_flags; // 1=fragment flags valid
|
|
uint8_t sec_enc; // secure encoding (0-3)
|
|
uint8_t nnum_s; // NNUM S flag
|
|
uint8_t fiw_roaming; // FIW n bit: 1=roaming supported
|
|
uint8_t is_priority; // 1=priority address (in BIW1 P section)
|
|
|
|
// BIW raw values (type=9 only). biw_field identifies the content.
|
|
// 0=SSID1 1=DATE 2=TIME 5=SYSINFO 7=SSID2
|
|
uint8_t biw_field; // BIW type field (0-7)
|
|
uint16_t biw_v1; // field-dependent value 1
|
|
uint16_t biw_v2; // field-dependent value 2
|
|
uint16_t biw_v3; // field-dependent value 3
|
|
uint16_t biw_v4; // field-dependent value 4
|
|
};
|
|
|
|
} /* namespace flex */
|
|
|
|
#endif /*__FLEX_DEFS_H__*/
|