b13081696d
Simplify MessageQueue pop() usage.
2015-08-27 14:35:17 -07:00
d8b3b4cb6b
Check queue empty only once when reading messages.
...
There was a second is_empty() call hidden in the pop() call, so the while(condition) was redundant.
2015-08-27 14:27:29 -07:00
5d9079f87f
Stop streaming when changing baseband configuration.
...
Without, the baseband would get confused.
2015-08-27 14:07:15 -07:00
e751e10e45
Add wideband spectrum processor.
2015-08-27 13:57:31 -07:00
4974774f82
Simplify PLL math when correcting for PPM.
2015-08-25 17:56:03 -07:00
98773cb62a
Make GIT_REVISION value available within code.
...
Addresses issue #59 .
No idea what it'll do if the commit is also tagged as a release...
2015-08-25 16:33:52 -07:00
8f326e2d8e
Use PPB correction to adjust clock generator XTAL PLLA frequency.
...
Addresses issue #40 .
2015-08-24 12:11:33 -07:00
fe7dcdc613
Function to adjust clock generator XTAL PLL frequency.
...
Needed to switch PLLA to operate in fractional mode.
2015-08-24 12:09:11 -07:00
11561659b4
Reset the M0 after the M4 is running HackRF firmware.
2015-08-20 20:26:36 -07:00
690c3c98db
Add Shutdown message, plumbing to send and handle.
2015-08-20 18:03:49 -07:00
2efbd337bd
Provide a way to exit application event loop.
2015-08-20 17:56:47 -07:00
1c3e45917c
Rework to make use of declared memory map regions.
2015-08-20 17:11:08 -07:00
4126f1ab1f
Change IPC to exchange data, not pointers.
2015-08-20 13:13:12 -07:00
f99016d78f
Tweak cast to C++ style.
2015-08-15 15:40:55 -07:00
25c2e612c0
Fix a narrowing conversion warning.
2015-08-15 17:56:30 -04:00
f2cabadf60
Review application initialization order.
...
Group related things together.
2015-08-14 22:28:28 -07:00
49b91d9c5d
Move event loop into EventDispatcher.
2015-08-14 22:01:20 -07:00
d5ebb9ef1e
Remove more dead code and comments.
2015-08-14 21:58:54 -07:00
aa801ada60
Move code comments to project Wiki.
2015-08-14 21:54:03 -07:00
b1a4418f06
Push more widget painting code into ui::Painter
...
Hide knowledge of damage tracking strategy.
2015-08-14 21:36:51 -07:00
2ebb41c0e6
Remove dead, commented code.
2015-08-14 21:35:48 -07:00
872c998ff1
Move widget tree painting to ui::Painter.
...
Still doesn't seem like the right place, but better than the event dispatcher!
2015-08-14 21:27:46 -07:00
a9bb7c96e5
Move UI dirty tracking out of application main.cpp.
2015-08-14 21:17:23 -07:00
fa465c14c4
Extract RTC interrupt handler into separate files.
2015-08-14 20:57:40 -07:00
32312a6cfb
Can't use context() in ui::Widget constructor, move use elsewhere.
...
TODO: Seems like a design flaw to me... Either eliminate need for context(), or pass into constructors.
2015-08-14 17:52:29 -07:00
a7226820d0
Hide implementation of MessageHandlerMap.
2015-08-14 17:31:23 -07:00
2aa8ae0d1f
Move FSKPacket message handler to ReceiverView.
2015-08-14 16:46:32 -07:00
c44357a16a
Remove dead, commented-out code.
2015-08-14 16:38:10 -07:00
02aab9b4e2
Application main() refactoring to group relevant bits.
2015-08-14 15:52:11 -07:00
1713c82841
Move ChibiOS init comments into Wiki.
2015-08-14 12:23:49 -07:00
d855336985
Persist tuned frequency.
...
w00t!
2015-08-04 10:31:03 -07:00
45d26abf10
Use correct memory region for persistent storage.
...
Turns out 0x10088000 - 0x10089fff is not the right place. It's 0x40041000, and is only 256 bytes!
Move PPM to correct place, change representation to PPB for finer control.
Reset PPB value to initial value if read value out of bounds.
Clip PPB value on write to permitted bounds.
Contributes to resolution of issue #11 .
2015-08-04 10:03:18 -07:00
985cbb874c
Change default receiver frequency.
...
Remove comments.
2015-08-02 09:38:49 -07:00
ddcb705a1e
Default LNA to off.
2015-08-02 09:37:42 -07:00
b70f1d9506
Move RSSI/baseband/audio bars to receiver mode.
...
Addresses issue #38 .
Side effects: more room in receiver for fields and data. More room for global status indications in full bar of SystemStatusView.
2015-08-01 18:07:09 -07:00
30d249df26
Remove dead code.
2015-08-01 15:20:44 -07:00
e6a3cba14e
Move HackRF firmware launch out of portapack::shutdown
2015-08-01 14:43:48 -07:00
96babc3e84
Shut down LCD during PortaPack shutdown.
2015-08-01 14:40:05 -07:00
b5802aadda
Clean up HackRF firmware mode message.
2015-08-01 14:32:22 -07:00
65d5f68bfb
Move LCD display object to portapack namespace.
...
Globals are bad... Except in embedded development!
2015-08-01 14:31:51 -07:00
fecbb7205e
Menu item to launch HackRF firmware.
2015-08-01 13:46:15 -07:00
8797aa9758
Stop audio PLL if shutting down GP_CLKIN clock source.
2015-08-01 13:45:52 -07:00
bfc73a6675
Move update_peripheral_clocks
...
Incorrect order of operations would hang execution if switching to IRC.
2015-08-01 13:44:52 -07:00
c025a2bba2
Code to shut down ClockManager-controlled devices.
2015-08-01 13:43:58 -07:00
1d16cd8aac
Consolidate peripheral declarations.
2015-08-01 13:42:27 -07:00
b32f5e2239
Generalize method for executing SPI flash image in M4 RAM.
2015-07-30 09:41:33 -07:00
d4c43044e0
Shuffle binaries in SPI flash image to insert HackRF firmware binary.
...
Bootstrap is now 64k @ 0x00000.
HackRF image is 64k @ 0x10000.
Baseband image is 128k @ 0x20000.
Application image is remainder of SPI flash, @ 0x40000.
2015-07-29 22:30:16 -07:00
accf934a45
Remove vregmode debug field in receiver.
...
Resolves issue #37 .
2015-07-29 16:19:18 -07:00
67976b73ba
UI plumbing for PPM adjust in receiver frequency options.
2015-07-29 16:09:00 -07:00
9db54276c1
Expose reference PPM correction property on receiver model.
2015-07-29 15:59:05 -07:00
Jared Boone
Clayton Smith