7710b2d1fa
ChannelSpectrumConfig message subsumes FIFONotify.
...
Separate channel spectrum config from spectrum data. This will permit sending config info only when necessary.
Use type information of ChannelSpectrum to statically define number of FFT bins elsewhere.
TODO: Posting configuration message way too often. Fixing that is the next step.
2016-01-06 12:10:30 -08:00
ba33cc737d
Transmit DisplayFrameSync message, handle in WaterfallSpectrum.
...
More kludginess, especially around initialization and timing. But it addresses the flickering lines of pixels at the bottom of the waterfall scroll area!
2016-01-06 11:36:57 -08:00
aaa1bc3a09
Transmit ChannelSpectrum data through separate FIFO.
...
Allows handling of data during LCD "vertical retrace", independent of other baseband->application messages. A bit kludgy still...
2016-01-06 11:34:41 -08:00
c1e5577669
Eliminate duplicate code between event_m4.hpp, event.hpp.
...
event.* is common code, _m0 and _m4 contain specific event mask definitions.
2016-01-04 12:54:05 -08:00
0fe5409357
Move M4TXEVENT interrupt control into event handler run().
2016-01-04 12:15:35 -08:00
69b258cc2b
Consolidate event handler code, including IRQ.
2016-01-04 12:15:10 -08:00
b058c0fe00
Consolidate M0-specific code.
2016-01-04 12:07:30 -08:00
b5aa2b205f
Implement AMConfigureMessage from M0 to M4.
2016-01-03 14:31:39 -08:00
f2f7032615
Wideband FM configuration messages from M0.
2016-01-03 13:38:55 -08:00
7496c2aced
Send NBFM configuration message from M0 to M4.
2016-01-03 12:47:22 -08:00
df593c2f0f
Run codec at 1 x baseband sample rate. Do not use CPLD decimator.
...
Codec performance appears to be unaffected by <8MHz sample rate. Saves a bit of power, eliminates dependency on CPLD decimation feature.
2015-12-29 10:55:55 -08:00
b38338efc0
Keep MAX2837 in standby so temperature can be read.
...
I think this won't significantly impact power consumption.
2015-12-17 20:59:21 -08:00
1146d1fa06
Clean up temperature sensor rendering.
2015-12-17 20:36:58 -08:00
188f692195
Center temperature graph in view.
2015-12-17 12:18:25 -08:00
c3116eac63
Use reference to temperature logger, more concise.
2015-12-17 12:16:26 -08:00
c92138f4b3
Extract calculation of temperature from raw sensor value.
2015-12-17 12:14:28 -08:00
146a06b0d1
Method to read TemperatureLogger record capacity.
2015-12-17 12:12:22 -08:00
17d405ccec
Weird syntax burp on my part.
2015-12-17 10:30:40 -08:00
3151100e50
Correct aesthetic typo in MAX2837 register defaults.
2015-12-16 22:37:55 -08:00
86edf01def
Quick and dirty temperature logger, debug view of temp vs. time.
2015-12-16 22:36:51 -08:00
d34499d920
Remove ui::BasebandBandwidthField.
2015-12-16 22:29:29 -08:00
7a4604e24e
Move code out of ui_spectrum.hpp.
2015-12-16 19:33:30 -08:00
4ce27f51d4
Add WM8731 registers view.
2015-12-14 12:09:31 -08:00
ee3a77f32c
Center RegistersWidget painting.
2015-12-14 11:47:43 -08:00
56c3167156
Move RegistersWidget/Views methods to .cpp.
2015-12-14 11:30:24 -08:00
2ee072aa7b
Invert register number column colors in RegistersWidget.
2015-12-14 11:24:48 -08:00
a340cbb74b
Make NavigationView an implicit first argument to any instance pushed onto nav stack.
2015-12-14 11:18:59 -08:00
0828c66b8a
Move default constructor to .hpp.
2015-12-14 11:12:12 -08:00
969d9bd070
Use std::unique_ptr inside NavigationView.
2015-12-14 11:11:49 -08:00
18c4672ba2
Clean up navigation stack alloc/delete sequence.
2015-12-14 10:52:08 -08:00
97f29f8336
Clean up UI navigation push constructor scheme.
2015-12-14 10:22:42 -08:00
a1aa6ecdbf
Eliminate per-device Views and RegisterWidgets, virtual methods.
...
Nice code size improvement, despite supporting three device register sets instead of just one.
2015-12-13 21:28:39 -08:00
a0fbfcf6a2
Consolidate code and improve reuse between RegistersWidgets.
2015-12-13 13:22:09 -08:00
94805285e2
Remove RegisterMap accessors.
2015-12-13 13:20:22 -08:00
2fe1285c11
Un-inline register read/write functions.
2015-12-13 13:18:37 -08:00
041e211841
Expose register read functions.
2015-12-13 13:18:05 -08:00
74aa2112f4
Add Si5351C register view, make more space in all register views.
2015-12-13 12:34:51 -08:00
5df1665994
Class divider comments.
2015-12-13 11:50:55 -08:00
32108a8229
Field for register set name was too narrow.
2015-12-13 11:50:31 -08:00
c7d49eb190
Expose MAX2837 registers, show registers in debug view.
2015-12-13 11:50:06 -08:00
a6fbd1c5ef
Make DebugRFFCView into generic RegistersView.
2015-12-13 11:48:39 -08:00
b058d609eb
Move packet timestamping into baseband.
...
Now reads the RTC peripheral at the end of each received packet.
TODO: Improve resolution to milliseconds or better.
TODO: Work back from end of packet to compute timestamp for beginning of packet.
TODO: Reuse ChibiOS RTC code, which isn't used now because ChibiOS on M0 core is responsible for RTC configuration, and including ChibiOS RTC API on M4 will also try to initialize/manage the peripheral.
2015-12-12 11:37:30 -08:00
ca7e0f1e20
Remove #include of ChibiOS test.h.
...
Would be appropriate if writing a test case project. Someday...
2015-12-10 18:28:19 -08:00
83bf2a9a36
Tweak BasebandConfiguration constructors to avoid surprise type conversions.
2015-12-10 14:40:48 -08:00
4d52f73f6a
Move Manchester to common/.
2015-12-10 11:28:18 -08:00
eb1402764e
Move ERT packet type to its rightful place.
...
No longer mixed up with Message types.
2015-12-08 16:19:27 -08:00
7de187e267
Move ERT, AIS packet code to common/.
2015-12-08 16:08:20 -08:00
2e81d1f5b7
Separate ERT packet and UI code.
2015-12-08 16:04:48 -08:00
644d3837ff
Consolidate AIS Packet types.
2015-12-08 15:54:35 -08:00
3e0acc9988
AIS-related namespace cleanup.
2015-12-08 15:53:17 -08:00
Jared Boone