4eb3f044a0
TPMS: Close row between controls and table header.
2016-07-25 15:29:52 -07:00
fe1a6c09bb
Clean up baseband processors to each have a main().
2016-07-24 21:42:11 -07:00
c8ffea0098
baseband: Move all init code into baseband.cpp.
2016-07-24 21:34:38 -07:00
ea143bd3fc
Move baseband init/shutdown code to before/after main(), not inside.
2016-07-24 21:26:00 -07:00
ffa797b926
File: Remove puts(), add write_line(), cascade changes in interface.
2016-07-24 20:39:21 -07:00
c2d971d59e
WAVFileWriter: Error handling while updating header.
2016-07-24 19:14:48 -07:00
ff17f8f293
File: Do not use f_error() in puts(), it doesn't return the reason for failure.
...
TODO: Improve puts() behavior to return a more specific error than FR_EOF.
2016-07-24 19:13:39 -07:00
d556ef38b4
File: Make incomplete write()s return FR_DISK_FULL.
2016-07-24 19:12:37 -07:00
931853a55f
Make File::Result::value() const.
2016-07-24 19:12:09 -07:00
8b02e40602
Move touch ADC data collection to M0.
...
...so it continues when M4 is shut down.
It's not as pretty as using DMA, but it's far simpler, even if it involves letting the ADC run continuously and taking the last samples even if not synchronizing to the phase of the sampling of the channels.
2016-07-24 15:31:53 -07:00
b3f4ea8978
Clean up SharedMemory placement new.
2016-07-24 15:27:05 -07:00
49d6cda731
Move BasebandConfiguration to receiver_model.hpp.
...
That's the only place it's being used now -- it's no longer moving between cores.
2016-07-19 17:11:32 -07:00
74b5571e8b
Remove baseband::start()/stop() and related message.
2016-07-19 17:06:22 -07:00
3c46abdb24
Remove redundant #include.
2016-07-19 14:25:56 -07:00
ff9c911a93
Optional code to disable baseband DMA synchronization.
2016-07-19 11:02:30 -07:00
2993f7be1d
SDIO: Commit optional code to run at 50MHz.
2016-07-19 11:00:31 -07:00
6f65cdf41e
Add frequency step control to capture app.
...
Redistribute other controls, remove empty row that had been reserved for options views.
2016-07-19 10:48:45 -07:00
a98ada0cb7
Extract FrequencyStepView from FrequencyOptionsView.
...
...for use in capture app.
2016-07-19 10:47:15 -07:00
77291b4e31
On PortaPack shutdown, init HackRF CPLD to EEPROM bitstream.
2016-07-18 11:32:14 -07:00
4b7fa9f411
CPLD: Add XC2C64A method to init from EEPROM contents.
2016-07-18 11:31:21 -07:00
c0b9761fe5
Move CPLD management into PortaPack::init().
2016-07-18 11:30:45 -07:00
5390c45e04
Fix Python 2 vs 3 breakage relating to hex().
...
In Python 2, hex() of large ints has a "L" on the end.
2016-07-17 16:16:13 -07:00
3f3fe3bb67
JTAG: Report if HackRF CPLD bitstream matches released version.
...
TODO: Could be better reporting (CRC?), and could not pause while checking CPLD EEPROM, and could offer a means to program the bitstream if it doesn't match...
2016-07-17 15:56:24 -07:00
204408d288
JTAG: Load HackRF CPLD bitstream into SRAM from firmware image.
...
No further concerns about the HackRF CPLD having an ancient bitstream on it! At least in PortaPack mode...
2016-07-17 15:54:02 -07:00
c8b1a8fbf6
JTAG: Add functions to check EEPROM, load SRAM of HackRF CPLD.
2016-07-17 15:52:58 -07:00
1d58f05163
JTAG: Auto-generate HackRF CPLD data from SVF.
2016-07-17 15:50:36 -07:00
cd3a91b3af
JTAG: HackRF CPLD SVF file for embedding in firmware.
2016-07-17 15:48:02 -07:00
51c114405b
JTAG: Tool that generates C++ files from XC2C64A SVF data.
2016-07-17 15:46:12 -07:00
4cc356f325
JTAG: Code to manage HackRF CPLD interactions.
2016-07-17 15:45:00 -07:00
71c7f543c5
JTAG: Add TAP state management.
...
Not all that happy with the implementation, but it's doing the job for now.
2016-07-17 15:44:30 -07:00
c0f4fbe32d
JTAG: Add GPIO definitions for HackRF CPLD.
2016-07-16 14:06:58 -07:00
22143c9543
JTAG: Remove unused methods.
2016-07-13 11:02:13 -07:00
18fe30136e
JTAG: Move Target interface to separate header.
2016-07-11 09:39:02 -07:00
6917ffe1e3
JTAG: Clean up definition of Target interface.
2016-07-11 09:16:47 -07:00
ad4a68f90a
CMake: Generate portapack_cpld_data.cpp from SVF via tool.
2016-07-05 12:45:31 -07:00
7bcde54050
Tool for generating CPLD bitstreams in C++ arrays, from SVF file.
2016-07-05 12:33:15 -07:00
740edc4d49
Remove PortaPack CPLD checksum display.
...
No point in calculating or showing, since full compare against desired bits is done at every startup -- way better than a CRC, and if it fails tries to program. If programming fails, the PortaPack panics and LED flashes.
2016-07-05 12:08:56 -07:00
3ed1d9e24a
CPLD: Method to calculate bitstream CRC32.
2016-07-05 12:06:51 -07:00
df825807d6
CRC: Rearrange public methods to reduce user error.
...
If you can access process_bits() without considering RevIn value, you will likely not get the CRC value you're expecting! Put RevIn check where it belongs, in process_bits().
2016-07-05 11:57:57 -07:00
42190b9587
CMake: Fix ldscript dependencies.
2016-07-03 18:48:39 -07:00
0899c48735
Remove linker map generation, other unnecessary(?) flags.
2016-07-03 18:33:36 -07:00
b6fe392512
CMake: Improve dependencies, how output files are managed/cleaned.
...
I almost think I understand CMake, now. Almost.
2016-07-03 18:32:50 -07:00
45ca3cf7e6
CMake: reduce intermediate targets, add script dependencies.
2016-07-03 11:32:21 -07:00
53434f3789
Fix Python2 string type error.
2016-07-02 18:15:39 -07:00
c52f5fa26c
Expose static EventDispatcher to stop main loop.
...
Used to fix reboot into HackRF firmware.
2016-07-02 16:38:01 -07:00
57293bc5eb
Clear application message queue after baseband is shut down.
2016-07-02 16:19:41 -07:00
30efa53956
Clear M4->M0 interrupt before M4 image is loaded.
...
...out of an abundance of caution.
2016-07-02 16:15:43 -07:00
34e45412d1
Dumb baseband-running state tracking to ease use of baseband API.
2016-07-02 16:12:36 -07:00
b2d5e47308
Clear baseband message at end of shutdown().
...
Allow baseband to shut down completely before shutdown message is acknowledged.
2016-07-02 16:02:50 -07:00
dbd0c17c2f
Clear baseband message for non-shutdown messages.
2016-07-02 16:02:03 -07:00
Jared Boone