e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
dec4e41189
CPLD: Organize CPLD code into namespaces.
...
Use type aliases to hide actual CPLD type (somewhat).
2017-06-02 21:57:13 -07:00
dd0c009e6f
CPLD: Stop generating HackRF CPLD .hpp file.
2017-06-02 21:55:35 -07:00
3d06941129
Move CPLD filres to common/
...
...for imminent refactoring.
2017-06-02 17:13:41 -07:00
a3483a8394
CPLD: Introduce Config type to clean up programming interface.
...
Hide the details of how the CPLD data is stored.
2017-06-02 16:54:24 -07:00
797e63a590
CPLD: Use correct bitstream for updating hardware.
...
Determine hardware version and use one of two CPLD bitstream files.
2017-05-31 22:28:07 -07:00
600dcb734e
AK4951: Initial commit.
2017-05-31 11:45:54 -07:00
bec626e29f
WM8731: Add Codec abstraction.
2017-05-31 11:42:12 -07:00
37c058354e
WM8731: Add method to detect codec is present.
...
Used to determine PortaPack hardware version.
2017-05-31 11:34:16 -07:00
8f5555b052
WM8731: Store headphone volume for mute() function.
...
So when unmuted, previous volume can be restored.
2017-05-31 11:32:32 -07:00
f6e1e78e8a
WM8731: Return bool from reset() and low-level write()s.
2017-05-31 11:28:00 -07:00
b3ee884f16
I2S RX: Set RX SDA pin to correct SCUMUX mode.
...
It's left in GPIO mode ordinarily, because of CPLD programming earlier in boot-up.
2017-05-26 16:50:34 -07:00
556085b3e3
I2S: Enable TX_WS output pin's input buffer.
...
This permits receipt of TX_WS as RX_WS for the receive side of the I2S peripheral, and was why I got no RX samples when testing microphone input.
2017-05-22 14:20:49 -07:00
a35d9ee8a9
Missing image files
2017-05-18 21:56:55 +01:00
38e14b1e30
Scanner: Added last locked frequencies list
...
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
dd0048db8d
Remove broken simd32_t type.
2017-05-03 09:58:07 +01:00
19e42196db
Fn for control of audio codec reset signal.
2017-05-01 10:37:49 +01:00
b12f90ef08
Adjust initial CPLD io_reg value for new CPLD code.
2017-05-01 10:34:33 +01:00
8c680ff893
Simplified LCR code a bit
...
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
90feadd9f5
POCSAG RX saves ignored address
...
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
eff96276c3
Made back button always focusable with left key
2017-04-21 00:31:21 +01:00
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
3a1e5b8772
Added address filter in POCSAG RX
...
Changed POCSAG log format
Console widget knows red, green and blue now
2017-04-18 21:29:55 +01:00
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
5b74b83458
Bitmap preview in SSTV TX
2017-03-22 18:21:31 +00:00
089eeeafe4
Tones bugfix, numbers station voice files search
2017-03-22 03:21:06 +00:00
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
2d75722b74
Added microphone TX (very basic for now)
2017-03-12 07:10:09 +00:00
446efa8fc0
Reduced audio tx FIFO refill size
...
Last received POCSAG address is auto loaded in POCSAG tx
2017-03-05 15:37:56 +00:00
2022fe137c
Morse TX bugfix: bad CW symbols, FM not stopping
...
Corrected fox hunt transmitter #s
Moved widgets a bit
Setting up proc_tones with 0 message length stops it
2017-03-03 08:06:11 +00:00
0ba05fea5e
Morse special chars and tx duration indication
2017-02-15 04:27:51 +00:00
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
d12cd0d8af
"Labels" widget
2017-02-12 07:23:31 +00:00
0102a34286
Reverted WFM mode to working state
...
TXView in ADSB TX
Lockable TXView
POCSAG TX bugfix with Alphanum and Numeric only
Testing Labels widget
2017-02-12 04:05:21 +00:00
21de81bb85
POCSAG TX: Support for numeric only and address only messages
2017-02-08 01:19:29 +00:00
fc8279aa30
POCSAG TX text and bitrate can be changed
...
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
24abe4b427
Yet another POCSAG bugfix (multi-batch messages are not cut anymore)
...
Added BCH ECC functions for checking, error correction and encoding
2017-02-06 20:32:33 +00:00
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
607e6c5bd4
CTCSS in soundboard. 24 jammer chs instead of 9.
...
Soundboard random mode now cares about loop option.
Started documenting UI.
2017-02-02 09:29:14 +00:00
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
Jared Boone
furrtek