dc8c34487f
Speed dropped_percent() common case, ensure dropped>0 returns >0%.
2016-04-27 12:16:37 -07:00
a72a3489cf
Expose percent of data dropped during capture.
2016-04-27 12:04:02 -07:00
1789868b8a
Track bytes from baseband and dropped when entering capture FIFO.
2016-04-27 10:40:50 -07:00
91ee2dbb67
Move FIFO and write size to CaptureConfig structure.
...
Now configured from baseband, where write size and appropriate FIFO size is known.
2016-04-26 22:26:30 -07:00
7436dea51a
Add CaptureConfig structure and message.
2016-04-23 14:54:15 -07:00
b35a8c4501
Add TPMS signal_type.
2016-04-06 17:04:40 -07:00
d125a5c662
Remove "K" parameter from FIFO template.
2016-02-10 10:41:06 -08:00
1d2dd4e19d
Old GCC on Travis-CI was cheesed off by my new syntax.
2016-02-03 17:59:46 -08:00
a1e1677b8b
Rename AM modulation mode "DSB".
2016-01-30 18:17:29 -08:00
e778be6472
Selection of AM/SSB from application side.
2016-01-30 18:02:28 -08:00
f2dff16820
Use complex channel filter taps for AM/SSB.
2016-01-30 17:30:54 -08:00
1915ff980f
Add AM processor decim_2.
2016-01-30 17:28:11 -08:00
b029bacd8c
Remove channel decimation from AMConfigureMessage.
2016-01-30 17:21:48 -08:00
aead1d8798
Change NBFM audio fs->24k, AM ->12k.
...
Send channel decimation factor from application to baseband.
2016-01-29 19:23:30 -08:00
96898f82b2
Pass IIR configs from application to baseband.
2016-01-29 15:57:20 -08:00
894d4b955c
Unclever first attempt at display sleep.
2016-01-27 20:33:54 -08:00
d821afc60d
Spectrum streaming control, spectrum attributes back in each frame.
...
TODO: This feels kinda complex, and there's some repeated Processor code that needs to be refactored into a base class.
2016-01-10 10:42:20 -08:00
7710b2d1fa
ChannelSpectrumConfig message subsumes FIFONotify.
...
Separate channel spectrum config from spectrum data. This will permit sending config info only when necessary.
Use type information of ChannelSpectrum to statically define number of FFT bins elsewhere.
TODO: Posting configuration message way too often. Fixing that is the next step.
2016-01-06 12:10:30 -08:00
ba33cc737d
Transmit DisplayFrameSync message, handle in WaterfallSpectrum.
...
More kludginess, especially around initialization and timing. But it addresses the flickering lines of pixels at the bottom of the waterfall scroll area!
2016-01-06 11:36:57 -08:00
aaa1bc3a09
Transmit ChannelSpectrum data through separate FIFO.
...
Allows handling of data during LCD "vertical retrace", independent of other baseband->application messages. A bit kludgy still...
2016-01-06 11:34:41 -08:00
62ee26e763
OK... Nuke list initializations.
2016-01-03 16:28:09 -08:00
422f6c6960
Don't pass by reference in message constructors.
2016-01-03 16:21:17 -08:00
b5aa2b205f
Implement AMConfigureMessage from M0 to M4.
2016-01-03 14:31:39 -08:00
f2f7032615
Wideband FM configuration messages from M0.
2016-01-03 13:38:55 -08:00
0497dbf62f
NBFM configuration message.
...
Allows changing NBFM filter configurations from M0.
2016-01-03 12:46:21 -08:00
39ca6fec62
Transform update spectrum event into message.
2016-01-03 12:05:47 -08:00
a7afc58cf8
More consistent use of pass-by-ref, const in baseband code.
2015-12-10 15:18:02 -08:00
83bf2a9a36
Tweak BasebandConfiguration constructors to avoid surprise type conversions.
2015-12-10 14:40:48 -08:00
3ed77af0c1
BasebandProcessor: Streamline construction of some messages.
2015-12-10 12:25:11 -08:00
eb1402764e
Move ERT packet type to its rightful place.
...
No longer mixed up with Message types.
2015-12-08 16:19:27 -08:00
d0d97e92cb
Rename ::Packet to baseband::Packet. Remove IPC packet types.
2015-12-08 15:15:51 -08:00
bd33e652ea
Abstract packet type/implementation details.
2015-12-07 12:35:05 -08:00
b9643dc988
Clean up ERT packet type notation.
...
Still not great, but at least repeated code is reduced.
2015-12-06 15:47:04 -08:00
82ff45860e
Add basic ERT (OOK) utility meter reception.
...
Extracted the Manchester formatting function for use in ERT, now also returns an indication of bits in error.
2015-12-01 11:24:48 -08:00
c70d95dcbe
Remove SDCardStatusMessage, replace with Signal, extract to separate files.
2015-12-01 10:38:35 -08:00
42104d217a
Broaden SD card status detail in message.
2015-11-29 15:50:58 -08:00
5928086fd9
Simplify SD card mount status code.
2015-11-29 15:37:24 -08:00
4f82524e77
Another default constructor.
2015-11-11 10:30:35 -08:00
2c64454172
More constructor style clean-up.
2015-11-11 09:35:28 -08:00
ebf103363c
Constructor style clean-up.
2015-11-11 09:16:20 -08:00
987ea3555d
SD card detection and filesystem mounting.
2015-11-10 15:24:42 -08:00
9f6c495fef
Add TPMS initial demodulator implementation.
...
Right now, 2FSK, 19200 baud, +/-38400Hz deviation. No effort is made to check CRC/checksums or decode packets.
2015-11-10 15:19:56 -08:00
791b2a9762
Remove now-unused FSKConfiguration message.
2015-11-10 15:07:20 -08:00
981c2fbfbd
Complete FSKProcessor's trip to being AISProcessor.
2015-11-10 15:04:38 -08:00
850c847bbf
Trap attempts to register more than one message handler at a time.
2015-11-09 11:57:38 -08:00
3e9f0971e1
Assert that FSKConfiguration size is the same between application and baseband binaries.
2015-11-06 09:40:02 -08:00
7a5100baf1
Enlarge packet payload size 256 -> 1024 bits.
2015-11-06 09:40:01 -08:00
37b1d7cf2f
Remove payload_length from PacketBuilder, etc.
2015-11-06 09:40:01 -08:00
e9f28f9ef3
Provide configuration of symbol unstuffing.
2015-11-06 09:40:00 -08:00
31ff13f1c0
Un-const Message in message handler interfaces.
...
I want to modify in place the messages that are received. Naughty, but oh well.
2015-11-06 09:39:59 -08:00
Jared Boone