22e44605b6
Hide baseband queue code inside baseband "API".
2016-02-10 20:11:19 -08:00
472b0a2e79
ReceiverModel no longer uses some baseband modes.
2016-02-10 16:32:25 -08:00
6c06549b6e
Remove reference PPM methods from ReceiverModel.
2016-02-10 15:34:33 -08:00
a9451c17b4
Move PPB clock adjustment out of ReceiverModel.
2016-02-05 16:52:34 -08:00
682c87e3ff
Wrap baseband sampling rate function to radio:: function.
2016-02-05 16:36:36 -08:00
0294165481
Extract LOTS of stuff into an audio API.
...
Prevent all manner of type and implementation leakage.
2016-02-05 16:25:43 -08:00
10c7c57fd1
Expose modulation configuration indices.
2016-02-02 15:19:43 -08:00
fece0a5e1b
Move modulation configuration into ReceiverModel.
2016-02-02 13:39:02 -08:00
25fac90d4f
Improve radio state management re: antenna bias voltage.
...
Responsibility for radio state is still rather muddy...
2016-01-23 11:31:50 -08:00
10d4172d5c
RF antenna bias voltage control API.
2016-01-23 11:30:00 -08:00
146caaab6f
Consolidate baseband disable code.
2016-01-10 11:10:13 -08:00
d9bfaaf805
Stop baseband streaming when switching radio configuration.
...
Probably unnecessary, but feeling paranoid about changing sample rates while there's a processor actively handling samples, and potentially maxing out the M4 core.
2016-01-10 11:01:54 -08:00
0647f26707
Move SGPIO configuration and control to baseband firmware.
...
Addresses long-standing and annoying bug where SGPIO DMA channel would not disable -- and not configure cleanly next time it was needed. My theory is that the DMA channel couldn't disable until it got a request from the peripheral, and sometimes the peripheral was disabled before that last request.
Anyway, the baseband firmware should control the SGPIO, methinks, despite the impact on baseband code size.
2016-01-10 10:23:39 -08:00
83bf2a9a36
Tweak BasebandConfiguration constructors to avoid surprise type conversions.
2015-12-10 14:40:48 -08:00
82ff45860e
Add basic ERT (OOK) utility meter reception.
...
Extracted the Manchester formatting function for use in ERT, now also returns an indication of bits in error.
2015-12-01 11:24:48 -08:00
791b2a9762
Remove now-unused FSKConfiguration message.
2015-11-10 15:07:20 -08:00
57db6a6367
Ignore more initial bits of AIS training sequence.
2015-11-06 09:40:01 -08:00
37b1d7cf2f
Remove payload_length from PacketBuilder, etc.
2015-11-06 09:40:01 -08:00
6499de39bf
Shorten AIS packet to expected data + FCS length.
2015-11-06 09:40:00 -08:00
e9f28f9ef3
Provide configuration of symbol unstuffing.
2015-11-06 09:40:00 -08:00
5d9079f87f
Stop streaming when changing baseband configuration.
...
Without, the baseband would get confused.
2015-08-27 14:07:15 -07:00
e751e10e45
Add wideband spectrum processor.
2015-08-27 13:57:31 -07:00
8f326e2d8e
Use PPB correction to adjust clock generator XTAL PLLA frequency.
...
Addresses issue #40 .
2015-08-24 12:11:33 -07:00
4126f1ab1f
Change IPC to exchange data, not pointers.
2015-08-20 13:13:12 -07:00
d855336985
Persist tuned frequency.
...
w00t!
2015-08-04 10:31:03 -07:00
45d26abf10
Use correct memory region for persistent storage.
...
Turns out 0x10088000 - 0x10089fff is not the right place. It's 0x40041000, and is only 256 bytes!
Move PPM to correct place, change representation to PPB for finer control.
Reset PPB value to initial value if read value out of bounds.
Clip PPB value on write to permitted bounds.
Contributes to resolution of issue #11 .
2015-08-04 10:03:18 -07:00
1d16cd8aac
Consolidate peripheral declarations.
2015-08-01 13:42:27 -07:00
9db54276c1
Expose reference PPM correction property on receiver model.
2015-07-29 15:59:05 -07:00
dc6fee8370
Initial firmware commit.
2015-07-08 08:39:24 -07:00
Jared Boone