e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
693a2533b5
Reverted to original CPLD data
2017-01-29 06:50:48 +00:00
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
b0a3f680e5
CPLD: Remove decimation feature.
2016-08-21 11:31:37 -07:00
45a754645e
Merge remote-tracking branch 'upstream/master'
...
# Conflicts:
# firmware/application/bitmap.hpp
# firmware/application/receiver_model.cpp
# firmware/application/receiver_model.hpp
# firmware/application/touch.hpp
# firmware/application/ui_setup.cpp
# firmware/baseband/proc_ais.hpp
# firmware/baseband/proc_ert.hpp
# firmware/bootstrap/CMakeLists.txt
# firmware/common/portapack_persistent_memory.cpp
# firmware/common/portapack_persistent_memory.hpp
2016-08-17 02:55:34 +02:00
ef9b4051b7
Expose TX gain on ReceiverModel.
...
Obviously, ReceiverModel is an even worse name/concept than it was before.
2016-08-03 16:13:54 -07:00
f85d83475c
ReceiverModel: Clean up Mode enum.
2016-07-27 14:57:50 -07:00
f05d917a7c
ReceiverModel: Use Mode instead of integer.
2016-07-27 14:51:37 -07:00
371c6e0906
ReceiverModel: Eliminate now-redundant BasebandConfiguration.
2016-07-27 14:42:46 -07:00
b60e88ef68
ReceiverModel: More method renaming.
...
update_baseband_configuration() -> update_sampling_rate().
2016-07-27 14:41:36 -07:00
44a1b7d9d7
ReceiverModel: Method renaming.
...
update_modulation_configuration() -> update_modulation().
2016-07-27 14:39:49 -07:00
fdfa7c9776
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/Makefile
firmware/application/Makefile
firmware/application/event_m0.cpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/baseband/baseband_thread.cpp
firmware/baseband/baseband_thread.hpp
firmware/bootstrap/CMakeLists.txt
firmware/common/message.hpp
firmware/common/portapack_shared_memory.hpp
hardware/.gitignore
2016-07-25 16:35:42 +02:00
49d6cda731
Move BasebandConfiguration to receiver_model.hpp.
...
That's the only place it's being used now -- it's no longer moving between cores.
2016-07-19 17:11:32 -07:00
fb21c1332e
Started close call dev
2016-05-11 12:45:03 +02:00
cee5417a4a
Capture UI basic controls.
...
Tuning, LNA/VGA gain, second IF and "channel" RSSI. Use ReceiverModel, so that audio receiver parameters come across for quicker capture configuration.
2016-04-12 10:56:00 -07:00
22e44605b6
Hide baseband queue code inside baseband "API".
2016-02-10 20:11:19 -08:00
472b0a2e79
ReceiverModel no longer uses some baseband modes.
2016-02-10 16:32:25 -08:00
6c06549b6e
Remove reference PPM methods from ReceiverModel.
2016-02-10 15:34:33 -08:00
10c7c57fd1
Expose modulation configuration indices.
2016-02-02 15:19:43 -08:00
fece0a5e1b
Move modulation configuration into ReceiverModel.
2016-02-02 13:39:02 -08:00
0cf839bc93
Expose instance clock_manager in portapack.hpp.
2016-01-29 15:21:33 -08:00
25fac90d4f
Improve radio state management re: antenna bias voltage.
...
Responsibility for radio state is still rather muddy...
2016-01-23 11:31:50 -08:00
10d4172d5c
RF antenna bias voltage control API.
2016-01-23 11:30:00 -08:00
146caaab6f
Consolidate baseband disable code.
2016-01-10 11:10:13 -08:00
df593c2f0f
Run codec at 1 x baseband sample rate. Do not use CPLD decimator.
...
Codec performance appears to be unaffected by <8MHz sample rate. Saves a bit of power, eliminates dependency on CPLD decimation feature.
2015-12-29 10:55:55 -08:00
e9bf500bfc
Move ReceiverMode enum to receiver_model.hpp
2015-12-01 21:00:31 -08:00
791b2a9762
Remove now-unused FSKConfiguration message.
2015-11-10 15:07:20 -08:00
e751e10e45
Add wideband spectrum processor.
2015-08-27 13:57:31 -07:00
d855336985
Persist tuned frequency.
...
w00t!
2015-08-04 10:31:03 -07:00
985cbb874c
Change default receiver frequency.
...
Remove comments.
2015-08-02 09:38:49 -07:00
ddcb705a1e
Default LNA to off.
2015-08-02 09:37:42 -07:00
9db54276c1
Expose reference PPM correction property on receiver model.
2015-07-29 15:59:05 -07:00
e571ca7f1c
Change reference initializations errors in GCC 4.8
...
Resolves issue #12 .
2015-07-17 12:07:38 -07:00
dc6fee8370
Initial firmware commit.
2015-07-08 08:39:24 -07:00
furrtek
furrtek
Jared Boone