portapack-mayhem/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2026-09-13 01:59:29 +00:00
Code Issues Packages Projects Releases 10 Wiki Activity

ChibiOS 2.6.8, until I can figure out where to get it from git.

Browse Source
This commit is contained in:
Jared Boone
2015-07-08 08:40:23 -07:00
parent dc6fee8370
commit e1eea8e08a
1929 changed files with 575326 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
firmware/chibios/os/hal/platforms/STM32/I2Cv1/i2c_lld.c
Executable
+914
View File
@@ -0,0 +1,914 @@
/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
Concepts and parts of this file have been contributed by Uladzimir Pylinsky
aka barthess.
*/
/**
* @file STM32/I2Cv1/i2c_lld.c
* @brief STM32 I2C subsystem low level driver source.
*
* @addtogroup I2C
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_I2C || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define I2C1_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM, \
STM32_I2C1_RX_DMA_CHN)
#define I2C1_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM, \
STM32_I2C1_TX_DMA_CHN)
#define I2C2_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM, \
STM32_I2C2_RX_DMA_CHN)
#define I2C2_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM, \
STM32_I2C2_TX_DMA_CHN)
#define I2C3_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_RX_DMA_STREAM, \
STM32_I2C3_RX_DMA_CHN)
#define I2C3_TX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_TX_DMA_STREAM, \
STM32_I2C3_TX_DMA_CHN)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
#define I2C_EV5_MASTER_MODE_SELECT \
((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY) << 16) | I2C_SR1_SB))
#define I2C_EV6_MASTER_TRA_MODE_SELECTED \
((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | \
I2C_SR1_ADDR | I2C_SR1_TXE))
#define I2C_EV6_MASTER_REC_MODE_SELECTED \
((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY)<< 16) | I2C_SR1_ADDR))
#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED \
((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | \
I2C_SR1_BTF | I2C_SR1_TXE))
#define I2C_EV9_MASTER_ADD10 \
((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY) << 16) | I2C_SR1_ADD10))
#define I2C_EV_MASK 0x00FFFFFF
#define I2C_ERROR_MASK \
((uint16_t)(I2C_SR1_BERR | I2C_SR1_ARLO | I2C_SR1_AF | I2C_SR1_OVR | \
I2C_SR1_PECERR | I2C_SR1_TIMEOUT | I2C_SR1_SMBALERT))
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief I2C1 driver identifier.*/
#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
I2CDriver I2CD1;
#endif
/** @brief I2C2 driver identifier.*/
#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
I2CDriver I2CD2;
#endif
/** @brief I2C3 driver identifier.*/
#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
I2CDriver I2CD3;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Wakes up the waiting thread.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] msg wakeup message
*
* @notapi
*/
#define wakeup_isr(i2cp, msg) { \
chSysLockFromIsr(); \
if ((i2cp)->thread != NULL) { \
Thread *tp = (i2cp)->thread; \
(i2cp)->thread = NULL; \
tp->p_u.rdymsg = (msg); \
chSchReadyI(tp); \
} \
chSysUnlockFromIsr(); \
}
/**
* @brief Aborts an I2C transaction.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_abort_operation(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->i2c;
/* Stops the I2C peripheral.*/
dp->CR1 = I2C_CR1_SWRST;
dp->CR1 = 0;
dp->CR2 = 0;
dp->SR1 = 0;
/* Stops the associated DMA streams.*/
dmaStreamDisable(i2cp->dmatx);
dmaStreamDisable(i2cp->dmarx);
}
/**
* @brief Handling of stalled I2C transactions.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_safety_timeout(void *p) {
I2CDriver *i2cp = (I2CDriver *)p;
chSysLockFromIsr();
if (i2cp->thread) {
Thread *tp = i2cp->thread;
i2c_lld_abort_operation(i2cp);
i2cp->thread = NULL;
tp->p_u.rdymsg = RDY_TIMEOUT;
chSchReadyI(tp);
}
chSysUnlockFromIsr();
}
/**
* @brief Set clock speed.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_set_clock(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->i2c;
uint16_t regCCR, clock_div;
int32_t clock_speed = i2cp->config->clock_speed;
i2cdutycycle_t duty = i2cp->config->duty_cycle;
chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
"i2c_lld_set_clock");
/* CR2 Configuration.*/
dp->CR2 &= (uint16_t)~I2C_CR2_FREQ;
dp->CR2 |= (uint16_t)I2C_CLK_FREQ;
/* CCR Configuration.*/
regCCR = 0;
clock_div = I2C_CCR_CCR;
if (clock_speed <= 100000) {
/* Configure clock_div in standard mode.*/
chDbgAssert(duty == STD_DUTY_CYCLE,
"i2c_lld_set_clock(), #1",
"Invalid standard mode duty cycle");
/* Standard mode clock_div calculate: Tlow/Thigh = 1/1.*/
chDbgAssert((STM32_PCLK1 % (clock_speed * 2)) == 0,
"i2c_lld_set_clock(), #2",
"PCLK1 must be divided without remainder");
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
chDbgAssert(clock_div >= 0x04,
"i2c_lld_set_clock(), #3",
"Clock divider less then 0x04 not allowed");
regCCR |= (clock_div & I2C_CCR_CCR);
/* Sets the Maximum Rise Time for standard mode.*/
dp->TRISE = I2C_CLK_FREQ + 1;
}
else if (clock_speed <= 400000) {
/* Configure clock_div in fast mode.*/
chDbgAssert((duty == FAST_DUTY_CYCLE_2) || (duty == FAST_DUTY_CYCLE_16_9),
"i2c_lld_set_clock(), #4",
"Invalid fast mode duty cycle");
if (duty == FAST_DUTY_CYCLE_2) {
/* Fast mode clock_div calculate: Tlow/Thigh = 2/1.*/
chDbgAssert((STM32_PCLK1 % (clock_speed * 3)) == 0,
"i2c_lld_set_clock(), #5",
"PCLK1 must be divided without remainder");
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
}
else if (duty == FAST_DUTY_CYCLE_16_9) {
/* Fast mode clock_div calculate: Tlow/Thigh = 16/9.*/
chDbgAssert((STM32_PCLK1 % (clock_speed * 25)) == 0,
"i2c_lld_set_clock(), #6",
"PCLK1 must be divided without remainder");
clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
regCCR |= I2C_CCR_DUTY;
}
chDbgAssert(clock_div >= 0x01,
"i2c_lld_set_clock(), #7",
"Clock divider less then 0x04 not allowed");
regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
/* Sets the Maximum Rise Time for fast mode.*/
dp->TRISE = (I2C_CLK_FREQ * 300 / 1000) + 1;
}
chDbgAssert((clock_div <= I2C_CCR_CCR),
"i2c_lld_set_clock(), #8", "the selected clock is too low");
dp->CCR = regCCR;
}
/**
* @brief Set operation mode of I2C hardware.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_set_opmode(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->i2c;
i2copmode_t opmode = i2cp->config->op_mode;
uint16_t regCR1;
regCR1 = dp->CR1;
switch (opmode) {
case OPMODE_I2C:
regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
break;
case OPMODE_SMBUS_DEVICE:
regCR1 |= I2C_CR1_SMBUS;
regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
break;
case OPMODE_SMBUS_HOST:
regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
break;
}
dp->CR1 = regCR1;
}
/**
* @brief I2C shared ISR code.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_serve_event_interrupt(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->i2c;
uint32_t regSR2 = dp->SR2;
uint32_t event = dp->SR1;
/* Interrupts are disabled just before dmaStreamEnable() because there
is no need of interrupts until next transaction begin. All the work is
done by the DMA.*/
switch (I2C_EV_MASK & (event | (regSR2 << 16))) {
case I2C_EV5_MASTER_MODE_SELECT:
if ((i2cp->addr >> 8) > 0) {
/* 10-bit address: 1 1 1 1 0 X X R/W */
dp->DR = 0xF0 | (0x6 & (i2cp->addr >> 8)) | (0x1 & i2cp->addr);
} else {
dp->DR = i2cp->addr;
}
break;
case I2C_EV9_MASTER_ADD10:
/* Set second addr byte (10-bit addressing)*/
dp->DR = (0xFF & (i2cp->addr >> 1));
break;
case I2C_EV6_MASTER_REC_MODE_SELECTED:
dp->CR2 &= ~I2C_CR2_ITEVTEN;
dmaStreamEnable(i2cp->dmarx);
dp->CR2 |= I2C_CR2_LAST; /* Needed in receiver mode. */
if (dmaStreamGetTransactionSize(i2cp->dmarx) < 2)
dp->CR1 &= ~I2C_CR1_ACK;
break;
case I2C_EV6_MASTER_TRA_MODE_SELECTED:
dp->CR2 &= ~I2C_CR2_ITEVTEN;
dmaStreamEnable(i2cp->dmatx);
break;
case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
/* Catches BTF event after the end of transmission.*/
if (dmaStreamGetTransactionSize(i2cp->dmarx) > 0) {
/* Starts "read after write" operation, LSB = 1 -> receive.*/
i2cp->addr |= 0x01;
dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
return;
}
dp->CR2 &= ~I2C_CR2_ITEVTEN;
dp->CR1 |= I2C_CR1_STOP;
wakeup_isr(i2cp, RDY_OK);
break;
default:
break;
}
/* Clear ADDR flag. */
if (event & (I2C_SR1_ADDR | I2C_SR1_ADD10))
(void)dp->SR2;
}
/**
* @brief DMA RX end IRQ handler.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] flags pre-shifted content of the ISR register
*
* @notapi
*/
static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags) {
I2C_TypeDef *dp = i2cp->i2c;
/* DMA errors handling.*/
#if defined(STM32_I2C_DMA_ERROR_HOOK)
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
STM32_I2C_DMA_ERROR_HOOK(i2cp);
}
#else
(void)flags;
#endif
dmaStreamDisable(i2cp->dmarx);
dp->CR2 &= ~I2C_CR2_LAST;
dp->CR1 &= ~I2C_CR1_ACK;
dp->CR1 |= I2C_CR1_STOP;
wakeup_isr(i2cp, RDY_OK);
}
/**
* @brief DMA TX end IRQ handler.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
I2C_TypeDef *dp = i2cp->i2c;
/* DMA errors handling.*/
#if defined(STM32_I2C_DMA_ERROR_HOOK)
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
STM32_I2C_DMA_ERROR_HOOK(i2cp);
}
#else
(void)flags;
#endif
dmaStreamDisable(i2cp->dmatx);
/* Enables interrupts to catch BTF event meaning transmission part complete.
Interrupt handler will decide to generate STOP or to begin receiving part
of R/W transaction itself.*/
dp->CR2 |= I2C_CR2_ITEVTEN;
}
/**
* @brief I2C error handler.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] sr content of the SR1 register to be decoded
*
* @notapi
*/
static void i2c_lld_serve_error_interrupt(I2CDriver *i2cp, uint16_t sr) {
/* Clears interrupt flags just to be safe.*/
dmaStreamDisable(i2cp->dmatx);
dmaStreamDisable(i2cp->dmarx);
i2cp->errors = I2CD_NO_ERROR;
if (sr & I2C_SR1_BERR) /* Bus error. */
i2cp->errors |= I2CD_BUS_ERROR;
if (sr & I2C_SR1_ARLO) /* Arbitration lost. */
i2cp->errors |= I2CD_ARBITRATION_LOST;
if (sr & I2C_SR1_AF) { /* Acknowledge fail. */
i2cp->i2c->CR2 &= ~I2C_CR2_ITEVTEN;
i2cp->i2c->CR1 |= I2C_CR1_STOP; /* Setting stop bit. */
i2cp->errors |= I2CD_ACK_FAILURE;
}
if (sr & I2C_SR1_OVR) /* Overrun. */
i2cp->errors |= I2CD_OVERRUN;
if (sr & I2C_SR1_TIMEOUT) /* SMBus Timeout. */
i2cp->errors |= I2CD_TIMEOUT;
if (sr & I2C_SR1_PECERR) /* PEC error. */
i2cp->errors |= I2CD_PEC_ERROR;
if (sr & I2C_SR1_SMBALERT) /* SMBus alert. */
i2cp->errors |= I2CD_SMB_ALERT;
/* If some error has been identified then sends wakes the waiting thread.*/
if (i2cp->errors != I2CD_NO_ERROR)
wakeup_isr(i2cp, RDY_RESET);
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
/**
* @brief I2C1 event interrupt handler.
*
* @notapi
*/
CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {
CH_IRQ_PROLOGUE();
i2c_lld_serve_event_interrupt(&I2CD1);
CH_IRQ_EPILOGUE();
}
/**
* @brief I2C1 error interrupt handler.
*/
CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {
uint16_t sr = I2CD1.i2c->SR1;
CH_IRQ_PROLOGUE();
I2CD1.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
i2c_lld_serve_error_interrupt(&I2CD1, sr);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_I2C_USE_I2C1 */
#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
/**
* @brief I2C2 event interrupt handler.
*
* @notapi
*/
CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
CH_IRQ_PROLOGUE();
i2c_lld_serve_event_interrupt(&I2CD2);
CH_IRQ_EPILOGUE();
}
/**
* @brief I2C2 error interrupt handler.
*
* @notapi
*/
CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
uint16_t sr = I2CD2.i2c->SR1;
CH_IRQ_PROLOGUE();
I2CD2.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
i2c_lld_serve_error_interrupt(&I2CD2, sr);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_I2C_USE_I2C2 */
#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
/**
* @brief I2C3 event interrupt handler.
*
* @notapi
*/
CH_IRQ_HANDLER(I2C3_EV_IRQHandler) {
CH_IRQ_PROLOGUE();
i2c_lld_serve_event_interrupt(&I2CD3);
CH_IRQ_EPILOGUE();
}
/**
* @brief I2C3 error interrupt handler.
*
* @notapi
*/
CH_IRQ_HANDLER(I2C3_ER_IRQHandler) {
uint16_t sr = I2CD3.i2c->SR1;
CH_IRQ_PROLOGUE();
I2CD3.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
i2c_lld_serve_error_interrupt(&I2CD3, sr);
CH_IRQ_EPILOGUE();
}
#endif /* STM32_I2C_USE_I2C3 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level I2C driver initialization.
*
* @notapi
*/
void i2c_lld_init(void) {
#if STM32_I2C_USE_I2C1
i2cObjectInit(&I2CD1);
I2CD1.thread = NULL;
I2CD1.i2c = I2C1;
I2CD1.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C1_RX_DMA_STREAM);
I2CD1.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C1_TX_DMA_STREAM);
#endif /* STM32_I2C_USE_I2C1 */
#if STM32_I2C_USE_I2C2
i2cObjectInit(&I2CD2);
I2CD2.thread = NULL;
I2CD2.i2c = I2C2;
I2CD2.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
I2CD2.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
#endif /* STM32_I2C_USE_I2C2 */
#if STM32_I2C_USE_I2C3
i2cObjectInit(&I2CD3);
I2CD3.thread = NULL;
I2CD3.i2c = I2C3;
I2CD3.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C3_RX_DMA_STREAM);
I2CD3.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C3_TX_DMA_STREAM);
#endif /* STM32_I2C_USE_I2C3 */
}
/**
* @brief Configures and activates the I2C peripheral.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
void i2c_lld_start(I2CDriver *i2cp) {
I2C_TypeDef *dp = i2cp->i2c;
i2cp->txdmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
STM32_DMA_CR_DIR_M2P;
i2cp->rxdmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE |
STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
STM32_DMA_CR_DIR_P2M;
/* If in stopped state then enables the I2C and DMA clocks.*/
if (i2cp->state == I2C_STOP) {
#if STM32_I2C_USE_I2C1
if (&I2CD1 == i2cp) {
bool_t b;
rccResetI2C1();
b = dmaStreamAllocate(i2cp->dmarx,
STM32_I2C_I2C1_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #1", "stream already allocated");
b = dmaStreamAllocate(i2cp->dmatx,
STM32_I2C_I2C1_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #2", "stream already allocated");
rccEnableI2C1(FALSE);
nvicEnableVector(I2C1_EV_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
nvicEnableVector(I2C1_ER_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C1_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C1_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
}
#endif /* STM32_I2C_USE_I2C1 */
#if STM32_I2C_USE_I2C2
if (&I2CD2 == i2cp) {
bool_t b;
rccResetI2C2();
b = dmaStreamAllocate(i2cp->dmarx,
STM32_I2C_I2C2_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #3", "stream already allocated");
b = dmaStreamAllocate(i2cp->dmatx,
STM32_I2C_I2C2_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #4", "stream already allocated");
rccEnableI2C2(FALSE);
nvicEnableVector(I2C2_EV_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
nvicEnableVector(I2C2_ER_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C2_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
}
#endif /* STM32_I2C_USE_I2C2 */
#if STM32_I2C_USE_I2C3
if (&I2CD3 == i2cp) {
bool_t b;
rccResetI2C3();
b = dmaStreamAllocate(i2cp->dmarx,
STM32_I2C_I2C3_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #5", "stream already allocated");
b = dmaStreamAllocate(i2cp->dmatx,
STM32_I2C_I2C3_IRQ_PRIORITY,
(stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
(void *)i2cp);
chDbgAssert(!b, "i2c_lld_start(), #6", "stream already allocated");
rccEnableI2C3(FALSE);
nvicEnableVector(I2C3_EV_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
nvicEnableVector(I2C3_ER_IRQn,
CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C3_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C3_DMA_PRIORITY);
i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C3_TX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_I2C_I2C3_DMA_PRIORITY);
}
#endif /* STM32_I2C_USE_I2C3 */
}
/* I2C registers pointed by the DMA.*/
dmaStreamSetPeripheral(i2cp->dmarx, &dp->DR);
dmaStreamSetPeripheral(i2cp->dmatx, &dp->DR);
/* Reset i2c peripheral.*/
dp->CR1 = I2C_CR1_SWRST;
dp->CR1 = 0;
dp->CR2 = I2C_CR2_ITERREN | I2C_CR2_DMAEN;
/* Setup I2C parameters.*/
i2c_lld_set_clock(i2cp);
i2c_lld_set_opmode(i2cp);
/* Ready to go.*/
dp->CR1 |= I2C_CR1_PE;
}
/**
* @brief Deactivates the I2C peripheral.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
void i2c_lld_stop(I2CDriver *i2cp) {
/* If not in stopped state then disables the I2C clock.*/
if (i2cp->state != I2C_STOP) {
/* I2C disable.*/
i2c_lld_abort_operation(i2cp);
dmaStreamRelease(i2cp->dmatx);
dmaStreamRelease(i2cp->dmarx);
#if STM32_I2C_USE_I2C1
if (&I2CD1 == i2cp) {
nvicDisableVector(I2C1_EV_IRQn);
nvicDisableVector(I2C1_ER_IRQn);
rccDisableI2C1(FALSE);
}
#endif
#if STM32_I2C_USE_I2C2
if (&I2CD2 == i2cp) {
nvicDisableVector(I2C2_EV_IRQn);
nvicDisableVector(I2C2_ER_IRQn);
rccDisableI2C2(FALSE);
}
#endif
#if STM32_I2C_USE_I2C3
if (&I2CD3 == i2cp) {
nvicDisableVector(I2C3_EV_IRQn);
nvicDisableVector(I2C3_ER_IRQn);
rccDisableI2C3(FALSE);
}
#endif
}
}
/**
* @brief Receives data via the I2C bus as master.
* @details Number of receiving bytes must be more than 1 on STM32F1x. This is
* hardware restriction.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address
* @param[out] rxbuf pointer to the receive buffer
* @param[in] rxbytes number of bytes to be received
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
* @return The operation status.
* @retval RDY_OK if the function succeeded.
* @retval RDY_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
* timeout the driver must be stopped and restarted
* because the bus is in an uncertain state</b>.
*
* @notapi
*/
msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
uint8_t *rxbuf, size_t rxbytes,
systime_t timeout) {
I2C_TypeDef *dp = i2cp->i2c;
VirtualTimer vt;
#if defined(STM32F1XX_I2C)
chDbgCheck((rxbytes > 1), "i2c_lld_master_receive_timeout");
#endif
/* Global timeout for the whole operation.*/
if (timeout != TIME_INFINITE)
chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
/* Releases the lock from high level driver.*/
chSysUnlock();
/* Initializes driver fields, LSB = 1 -> receive.*/
i2cp->addr = (addr << 1) | 0x01;
i2cp->errors = 0;
/* RX DMA setup.*/
dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
/* Waits until BUSY flag is reset and the STOP from the previous operation
is completed, alternatively for a timeout condition.*/
while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
chSysLock();
if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
return RDY_TIMEOUT;
chSysUnlock();
}
/* This lock will be released in high level driver.*/
chSysLock();
/* Atomic check on the timer in order to make sure that a timeout didn't
happen outside the critical zone.*/
if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
return RDY_TIMEOUT;
/* Starts the operation.*/
dp->CR2 |= I2C_CR2_ITEVTEN;
dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
/* Waits for the operation completion or a timeout.*/
i2cp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
chVTResetI(&vt);
return chThdSelf()->p_u.rdymsg;
}
/**
* @brief Transmits data via the I2C bus as master.
* @details Number of receiving bytes must be 0 or more than 1 on STM32F1x.
* This is hardware restriction.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address
* @param[in] txbuf pointer to the transmit buffer
* @param[in] txbytes number of bytes to be transmitted
* @param[out] rxbuf pointer to the receive buffer
* @param[in] rxbytes number of bytes to be received
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
* @return The operation status.
* @retval RDY_OK if the function succeeded.
* @retval RDY_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
* timeout the driver must be stopped and restarted
* because the bus is in an uncertain state</b>.
*
* @notapi
*/
msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
const uint8_t *txbuf, size_t txbytes,
uint8_t *rxbuf, size_t rxbytes,
systime_t timeout) {
I2C_TypeDef *dp = i2cp->i2c;
VirtualTimer vt;
#if defined(STM32F1XX_I2C)
chDbgCheck(((rxbytes == 0) || ((rxbytes > 1) && (rxbuf != NULL))),
"i2c_lld_master_transmit_timeout");
#endif
/* Global timeout for the whole operation.*/
if (timeout != TIME_INFINITE)
chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
/* Releases the lock from high level driver.*/
chSysUnlock();
/* Initializes driver fields, LSB = 0 -> write.*/
i2cp->addr = addr << 1;
i2cp->errors = 0;
/* TX DMA setup.*/
dmaStreamSetMode(i2cp->dmatx, i2cp->txdmamode);
dmaStreamSetMemory0(i2cp->dmatx, txbuf);
dmaStreamSetTransactionSize(i2cp->dmatx, txbytes);
/* RX DMA setup.*/
dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
/* Waits until BUSY flag is reset and the STOP from the previous operation
is completed, alternatively for a timeout condition.*/
while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
chSysLock();
if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
return RDY_TIMEOUT;
chSysUnlock();
}
/* This lock will be released in high level driver.*/
chSysLock();
/* Atomic check on the timer in order to make sure that a timeout didn't
happen outside the critical zone.*/
if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
return RDY_TIMEOUT;
/* Starts the operation.*/
dp->CR2 |= I2C_CR2_ITEVTEN;
dp->CR1 |= I2C_CR1_START;
/* Waits for the operation completion or a timeout.*/
i2cp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
chVTResetI(&vt);
return chThdSelf()->p_u.rdymsg;
}
#endif /* HAL_USE_I2C */
/** @} */
firmware/chibios/os/hal/platforms/STM32/I2Cv1/i2c_lld.h
Executable
+463
View File
@@ -0,0 +1,463 @@
/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
Concepts and parts of this file have been contributed by Uladzimir Pylinsky
aka barthess.
*/
/**
* @file STM32/I2Cv1/i2c_lld.h
* @brief STM32 I2C subsystem low level driver header.
*
* @addtogroup I2C
* @{
*/
#ifndef _I2C_LLD_H_
#define _I2C_LLD_H_
#if HAL_USE_I2C || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Peripheral clock frequency.
*/
#define I2C_CLK_FREQ ((STM32_PCLK1) / 1000000)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief I2C1 driver enable switch.
* @details If set to @p TRUE the support for I2C1 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C1 FALSE
#endif
/**
* @brief I2C2 driver enable switch.
* @details If set to @p TRUE the support for I2C2 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C2 FALSE
#endif
/**
* @brief I2C3 driver enable switch.
* @details If set to @p TRUE the support for I2C3 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C3) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C3 FALSE
#endif
/**
* @brief I2C1 interrupt priority level setting.
*/
#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
#endif
/**
* @brief I2C2 interrupt priority level setting.
*/
#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
#endif
/**
* @brief I2C3 interrupt priority level setting.
*/
#if !defined(STM32_I2C_I2C3_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_IRQ_PRIORITY 10
#endif
/**
* @brief I2C1 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA streams but
* because of the streams ordering the RX stream has always priority
* over the TX stream.
*/
#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#endif
/**
* @brief I2C2 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA streams but
* because of the streams ordering the RX stream has always priority
* over the TX stream.
*/
#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#endif
/**
* @brief I2C3 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA streams but
* because of the streams ordering the RX stream has always priority
* over the TX stream.
*/
#if !defined(STM32_I2C_I2C3_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_DMA_PRIORITY 1
#endif
/**
* @brief I2C DMA error hook.
* @note The default action for DMA errors is a system halt because DMA
* error can only happen because programming errors.
*/
#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt()
#endif
#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
/**
* @brief DMA stream used for I2C1 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C1_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#endif
/**
* @brief DMA stream used for I2C1 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C1_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#endif
/**
* @brief DMA stream used for I2C2 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C2_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#endif
/**
* @brief DMA stream used for I2C2 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C2_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#endif
/**
* @brief DMA stream used for I2C3 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C3_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#endif
/**
* @brief DMA stream used for I2C3 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C3_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#endif
#else /* !STM32_ADVANCED_DMA */
/* Fixed streams for platforms using the old DMA peripheral, the values are
valid for both STM32F1xx and STM32L1xx.*/
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#endif /* !STM32_ADVANCED_DMA*/
/* Flag for the whole STM32F1XX family. */
#if defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
defined(STM32F10X_CL)
#define STM32F1XX_I2C
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/** @brief error checks */
#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
#error "I2C1 not present in the selected device"
#endif
#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
#error "I2C2 not present in the selected device"
#endif
#if STM32_I2C_USE_I2C3 && !STM32_HAS_I2C3
#error "I2C3 not present in the selected device"
#endif
#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2 && \
!STM32_I2C_USE_I2C3
#error "I2C driver activated but no I2C peripheral assigned"
#endif
#if STM32_I2C_USE_I2C1 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
STM32_I2C1_RX_DMA_MSK)
#error "invalid DMA stream associated to I2C1 RX"
#endif
#if STM32_I2C_USE_I2C1 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
STM32_I2C1_TX_DMA_MSK)
#error "invalid DMA stream associated to I2C1 TX"
#endif
#if STM32_I2C_USE_I2C2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
STM32_I2C2_RX_DMA_MSK)
#error "invalid DMA stream associated to I2C2 RX"
#endif
#if STM32_I2C_USE_I2C2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
STM32_I2C2_TX_DMA_MSK)
#error "invalid DMA stream associated to I2C2 TX"
#endif
#if STM32_I2C_USE_I2C3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_RX_DMA_STREAM, \
STM32_I2C3_RX_DMA_MSK)
#error "invalid DMA stream associated to I2C3 RX"
#endif
#if STM32_I2C_USE_I2C3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_TX_DMA_STREAM, \
STM32_I2C3_TX_DMA_MSK)
#error "invalid DMA stream associated to I2C3 TX"
#endif
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/* Check clock range. */
#if defined(STM32F4XX)
#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 42)
#error "I2C peripheral clock frequency out of range."
#endif
#elif defined(STM32L1XX)
#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 32)
#error "I2C peripheral clock frequency out of range."
#endif
#elif defined(STM32F2XX)
#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 30)
#error "I2C peripheral clock frequency out of range."
#endif
#elif defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
defined(STM32F10X_HD_VL)
#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 24)
#error "I2C peripheral clock frequency out of range."
#endif
#elif defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
defined(STM32F10X_CL)
#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 36)
#error "I2C peripheral clock frequency out of range."
#endif
#else
#error "unspecified, unsupported or invalid STM32 platform"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type representing I2C address.
*/
typedef uint16_t i2caddr_t;
/**
* @brief I2C Driver condition flags type.
*/
typedef uint32_t i2cflags_t;
/**
* @brief Supported modes for the I2C bus.
*/
typedef enum {
OPMODE_I2C = 1,
OPMODE_SMBUS_DEVICE = 2,
OPMODE_SMBUS_HOST = 3,
} i2copmode_t;
/**
* @brief Supported duty cycle modes for the I2C bus.
*/
typedef enum {
STD_DUTY_CYCLE = 1,
FAST_DUTY_CYCLE_2 = 2,
FAST_DUTY_CYCLE_16_9 = 3,
} i2cdutycycle_t;
/**
* @brief Driver configuration structure.
*/
typedef struct {
i2copmode_t op_mode; /**< @brief Specifies the I2C mode. */
uint32_t clock_speed; /**< @brief Specifies the clock frequency.
@note Must be set to a value lower
than 400kHz. */
i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode
duty cycle. */
} I2CConfig;
/**
* @brief Type of a structure representing an I2C driver.
*/
typedef struct I2CDriver I2CDriver;
/**
* @brief Structure representing an I2C driver.
*/
struct I2CDriver {
/**
* @brief Driver state.
*/
i2cstate_t state;
/**
* @brief Current configuration data.
*/
const I2CConfig *config;
/**
* @brief Error flags.
*/
i2cflags_t errors;
#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
#if CH_USE_MUTEXES || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the bus.
*/
Mutex mutex;
#elif CH_USE_SEMAPHORES
Semaphore semaphore;
#endif
#endif /* I2C_USE_MUTUAL_EXCLUSION */
#if defined(I2C_DRIVER_EXT_FIELDS)
I2C_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief Thread waiting for I/O completion.
*/
Thread *thread;
/**
* @brief Current slave address without R/W bit.
*/
i2caddr_t addr;
/**
* @brief RX DMA mode bit mask.
*/
uint32_t rxdmamode;
/**
* @brief TX DMA mode bit mask.
*/
uint32_t txdmamode;
/**
* @brief Receive DMA channel.
*/
const stm32_dma_stream_t *dmarx;
/**
* @brief Transmit DMA channel.
*/
const stm32_dma_stream_t *dmatx;
/**
* @brief Pointer to the I2Cx registers block.
*/
I2C_TypeDef *i2c;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @brief Get errors from I2C driver.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
* @notapi
*/
#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(__DOXYGEN__)
#if STM32_I2C_USE_I2C1
extern I2CDriver I2CD1;
#endif
#if STM32_I2C_USE_I2C2
extern I2CDriver I2CD2;
#endif
#if STM32_I2C_USE_I2C3
extern I2CDriver I2CD3;
#endif
#endif /* !defined(__DOXYGEN__) */
#ifdef __cplusplus
extern "C" {
#endif
void i2c_lld_init(void);
void i2c_lld_start(I2CDriver *i2cp);
void i2c_lld_stop(I2CDriver *i2cp);
msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
const uint8_t *txbuf, size_t txbytes,
uint8_t *rxbuf, size_t rxbytes,
systime_t timeout);
msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
uint8_t *rxbuf, size_t rxbytes,
systime_t timeout);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_I2C */
#endif /* _I2C_LLD_H_ */
/** @} */