mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2026-09-13 18:19:33 +00:00
Add praline gpio (#3218)
* Implement antenna bias control for Praline and update GPIO configurations * Add GPIO power management functions and update board initialization for Praline * Refactor power management functions for Praline and update GPIO configurations * Update GPIO configurations for Praline and enable power control pins. AA_EN enabled * Refactor GPIO configuration for Praline: update array size definitions and clean up comments * Add P1 and P2 control functions for PRALINE * Introduced P1_Function and P2_Function enums in ClockManager to manage multiplexer control. * mplemented set_p1_control and set_p2_control methods for configuring P1 and P2 control pins based on specified functions. * Updated clock_manager.hpp and clock_manager.cpp to include new functionality. * Modified MAX2837 and MAX2839 initialization to conditionally configure GPIO based on PRALINE. * Adjusted RFFC507x and RFFC507x_SPI initialization to include GPIO setup for PRALINE. - Refactored RF path initialization to remove unnecessary GPIO setup. - Updated board configuration for PRALINE to reflect new GPIO settings and pin configurations. - Cleaned up FPGA bridge code by removing unused pin configuration functions. - Adjusted SCU array size in pal_lld.h for PRALINE. - Enhanced hackrf_gpio.hpp to define multiplexer control pins for PRALINE. - Modified LED setup to accommodate active-low configuration for PRALINE. * Refactor GPIO and power control functions - Removed unused power control function declarations from board.h. - Enhanced gpio.hpp with new pin setup functions and GPIO control structures for PRALINE. - Consolidated multiplexer control pin definitions into gpio_control namespace. - Moved power control function implementations to gpio.cpp, including detailed VAA power management logic. - Updated power control functions to handle both PRALINE and HackRF R9 configurations. - Cleaned up hackrf_gpio.hpp by removing redundant multiplexer control definitions. * Refactor GPIO control for PRALINE: update MAX2831 and RFFC507x configurations, add new GPIO mappings * Refactor GPIO configurations for PRALINE: update anti-aliasing filter pin mapping, enhance LED setup logic, and add placeholder GPIO entries. * Refactor GPIO configurations for PRALINE: update LED mappings and remove unused anti-aliasing filter GPIO entry.
This commit is contained in:
Pezsma
GitHub
@@ -52,8 +52,6 @@
|
||||
/* Driver exported functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0]))
|
||||
|
||||
/**
|
||||
* @brief LPC43xx I/O ports configuration.
|
||||
* @details Ports 0 through 8.
|
||||
@@ -62,15 +60,15 @@
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
void _pal_lld_init(const PALConfig *config) {
|
||||
for(size_t i=0; i<8; i++) {
|
||||
LPC_GPIO->PIN[i] = config->P[i].data;
|
||||
LPC_GPIO->DIR[i] = config->P[i].dir;
|
||||
}
|
||||
void _pal_lld_init(const PALConfig* config) {
|
||||
for (size_t i = 0; i < 8; i++) {
|
||||
LPC_GPIO->PIN[i] = config->P[i].data;
|
||||
LPC_GPIO->DIR[i] = config->P[i].dir;
|
||||
}
|
||||
|
||||
for(size_t i=0; i<ARRAY_SIZE(config->SCU); i++) {
|
||||
LPC_SCU->SFSP[config->SCU[i].port][config->SCU[i].pin] = config->SCU[i].config.word;
|
||||
}
|
||||
for (size_t i = 0; i < SCU_ARRAY_SIZE; i++) {
|
||||
LPC_SCU->SFSP[config->SCU[i].port][config->SCU[i].pin] = config->SCU[i].config.word;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
@@ -87,14 +85,14 @@ void _pal_lld_init(const PALConfig *config) {
|
||||
void _pal_lld_setgroupmode(ioportid_t port,
|
||||
ioportmask_t mask,
|
||||
iomode_t mode) {
|
||||
/* TODO: Handling pull-up, pull-down modes not implemented, as it would
|
||||
* require a map from GPIO to SCU pins. Not today.
|
||||
*/
|
||||
if( mode == PAL_MODE_OUTPUT_PUSHPULL ) {
|
||||
LPC_GPIO->DIR[port] |= mask;
|
||||
} else {
|
||||
LPC_GPIO->DIR[port] &= ~mask;
|
||||
}
|
||||
/* TODO: Handling pull-up, pull-down modes not implemented, as it would
|
||||
* require a map from GPIO to SCU pins. Not today.
|
||||
*/
|
||||
if (mode == PAL_MODE_OUTPUT_PUSHPULL) {
|
||||
LPC_GPIO->DIR[port] |= mask;
|
||||
} else {
|
||||
LPC_GPIO->DIR[port] &= ~mask;
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* HAL_USE_PAL */
|
||||
|
||||
@@ -50,10 +50,18 @@
|
||||
* @note Implementations may extend this structure to contain more,
|
||||
* architecture dependent, fields.
|
||||
*/
|
||||
|
||||
#ifdef PRALINE
|
||||
#define SCU_ARRAY_SIZE 78
|
||||
#else
|
||||
#define SCU_ARRAY_SIZE 56
|
||||
#endif
|
||||
|
||||
typedef struct {
|
||||
/** @brief GPIO setup data.*/
|
||||
gpio_setup_t P[8];
|
||||
scu_setup_t SCU[60];
|
||||
/** @brief GPIO setup data.*/
|
||||
gpio_setup_t P[8];
|
||||
scu_setup_t SCU[SCU_ARRAY_SIZE];
|
||||
|
||||
} PALConfig;
|
||||
|
||||
/**
|
||||
@@ -94,50 +102,50 @@ typedef uint8_t iopadid_t;
|
||||
/**
|
||||
* @brief GPIO0 port identifier.
|
||||
*/
|
||||
#define IOPORT1 0
|
||||
#define GPIO0 0
|
||||
#define IOPORT1 0
|
||||
#define GPIO0 0
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT2 1
|
||||
#define GPIO1 1
|
||||
#define IOPORT2 1
|
||||
#define GPIO1 1
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT3 2
|
||||
#define GPIO2 2
|
||||
#define IOPORT3 2
|
||||
#define GPIO2 2
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT4 3
|
||||
#define GPIO3 3
|
||||
#define IOPORT4 3
|
||||
#define GPIO3 3
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT5 4
|
||||
#define GPIO4 4
|
||||
#define IOPORT5 4
|
||||
#define GPIO4 4
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT6 5
|
||||
#define GPIO5 5
|
||||
#define IOPORT6 5
|
||||
#define GPIO5 5
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT7 6
|
||||
#define GPIO6 6
|
||||
#define IOPORT7 6
|
||||
#define GPIO6 6
|
||||
|
||||
/**
|
||||
* @brief GPIO1 port identifier.
|
||||
*/
|
||||
#define IOPORT8 7
|
||||
#define GPIO7 7
|
||||
#define IOPORT8 7
|
||||
#define GPIO7 7
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Implementation, some of the following macros could be implemented as */
|
||||
@@ -237,7 +245,7 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
//#define pal_lld_readgroup(port, mask, offset) 0
|
||||
// #define pal_lld_readgroup(port, mask, offset) 0
|
||||
|
||||
/**
|
||||
* @brief Writes a group of bits.
|
||||
@@ -253,7 +261,7 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
//#define pal_lld_writegroup(port, mask, offset, bits) (void)bits
|
||||
// #define pal_lld_writegroup(port, mask, offset, bits) (void)bits
|
||||
|
||||
/**
|
||||
* @brief Pads group mode setup.
|
||||
@@ -268,8 +276,8 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_setgroupmode(port, mask, offset, mode) \
|
||||
_pal_lld_setgroupmode(port, mask << offset, mode)
|
||||
#define pal_lld_setgroupmode(port, mask, offset, mode) \
|
||||
_pal_lld_setgroupmode(port, mask << offset, mode)
|
||||
|
||||
/**
|
||||
* @brief Reads a logical state from an I/O pad.
|
||||
@@ -285,8 +293,8 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_readpad(port, pad) \
|
||||
(LPC_GPIO->B[((port) * 32) + (pad)])
|
||||
#define pal_lld_readpad(port, pad) \
|
||||
(LPC_GPIO->B[((port) * 32) + (pad)])
|
||||
|
||||
/**
|
||||
* @brief Writes a logical state on an output pad.
|
||||
@@ -303,8 +311,8 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_writepad(port, pad, bit) \
|
||||
((LPC_GPIO->B[((port) * 32) + (pad)]) = (bit))
|
||||
#define pal_lld_writepad(port, pad, bit) \
|
||||
((LPC_GPIO->B[((port) * 32) + (pad)]) = (bit))
|
||||
|
||||
/**
|
||||
* @brief Sets a pad logical state to @p PAL_HIGH.
|
||||
@@ -317,8 +325,8 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_setpad(port, pad) \
|
||||
(LPC_GPIO->SET[(port)] = 1 << (pad))
|
||||
#define pal_lld_setpad(port, pad) \
|
||||
(LPC_GPIO->SET[(port)] = 1 << (pad))
|
||||
|
||||
/**
|
||||
* @brief Clears a pad logical state to @p PAL_LOW.
|
||||
@@ -331,7 +339,7 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_clearpad(port, pad) \
|
||||
#define pal_lld_clearpad(port, pad) \
|
||||
(LPC_GPIO->CLR[(port)] = 1 << (pad))
|
||||
|
||||
/**
|
||||
@@ -345,8 +353,8 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
#define pal_lld_togglepad(port, pad) \
|
||||
(LPC_GPIO->NOT[(port)] = 1 << (pad))
|
||||
#define pal_lld_togglepad(port, pad) \
|
||||
(LPC_GPIO->NOT[(port)] = 1 << (pad))
|
||||
|
||||
/**
|
||||
* @brief Pad mode setup.
|
||||
@@ -362,7 +370,7 @@ typedef uint8_t iopadid_t;
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
//#define pal_lld_setpadmode(port, pad, mode)
|
||||
// #define pal_lld_setpadmode(port, pad, mode)
|
||||
|
||||
#if !defined(__DOXYGEN__)
|
||||
extern const PALConfig pal_default_config;
|
||||
@@ -371,10 +379,10 @@ extern const PALConfig pal_default_config;
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void _pal_lld_init(const PALConfig *config);
|
||||
void _pal_lld_setgroupmode(ioportid_t port,
|
||||
ioportmask_t mask,
|
||||
iomode_t mode);
|
||||
void _pal_lld_init(const PALConfig* config);
|
||||
void _pal_lld_setgroupmode(ioportid_t port,
|
||||
ioportmask_t mask,
|
||||
iomode_t mode);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user