Send Display Normal on input change

content/novastar.qplug

@@ -593,6 +593,8 @@ if (Controls) then
 				{0x00,0x80,0xFE,0x00,0x01,0x00,0xFF,0xFF,0x01,0x00,0x01,0x01,0x00,0x02,0x01,0x00,0x09,0xE1,0x58}, --Grayscale
 				{0x00,0x80,0xFE,0x00,0x01,0x00,0xFF,0xFF,0x01,0x00,0x01,0x01,0x00,0x02,0x01,0x00,0x0A,0xE2,0x58}  --Aging-All
 			},
+			DisplayNormal = { 0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x50,0x00,0x20,0x02,0x01,0x00,0x00,0xC7,0x56 },
+			DisplayNormalAlt = { 0x00,0x38,0xFE,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x04,0x00,0x00,0x13,0x01,0x00,0x03,0xA7,0x56 },
 			Inputs = {
 				VX4S = {
 					{0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x2D,0x00,0x20,0x02,0x01,0x00,0x10,0xB4,0x56}, --DVI
@@ -701,8 +703,12 @@ if (Controls) then
 
 	function sendCommand(cmd)
 		if NovaStar.socket.IsConnected then 
-			print("Sending Packet")
+			print("Sending packet to connected NovaStar")
-			print(hex_dump(getCmdString(cmd)))
+		else
+			print("Following would have been sent if NovaStar was connected")
+		end;
+		print(hex_dump(getCmdString(cmd)))
+		if NovaStar.socket.IsConnected then
 			NovaStar.socket:Write(getCmdString(NovaStar.Commands.Preamble) .. getCmdString(cmd))
 		end
 	end
@@ -792,6 +798,11 @@ if (Controls) then
 			if (v ~= nil and #v > 1) then
 				print("value is not nill and length greater than 1")
 				Controls['IN'..k].EventHandler = function()
+					if(Properties['Model'].Value ~= 'VX6S') then 
+						sendCommand(NovaStar.Commands.DisplayNormal)
+					else
+						sendCommand(NovaStar.Commands.DisplayNormalAlt)
+					end;
 					sendCommand(v)
 				end
 			else