Reviewing the branch turned up defects, several of them worse than the
problems the original commits set out to solve.
Destructive: deleting an automation removed its global triggers and only then
discovered a rundown event also referenced it. The delete failed, the user
cancelled, and their triggers were gone for good. The server reports trigger
references before event ones, so this was reachable whenever both existed.
Deleted triggers are now recreated when the delete is refused.
Silently wrong: a template read the project from disk while writes are
debounced by three seconds, so "make some automations, save them as a
template" could produce a template without them. Verified by hand: an
automation created milliseconds earlier now appears.
The demo shipped half a pair. The danger warning set a stage message visible
and nothing ever cleared it, so from the first event that hit its danger
window the message covered the countdown for the rest of the session. The
recipe library ships the clearing counterpart; the demo now does too, and the
whole cycle is verified against a running server.
Flood control undid itself. resetAutomationLogState ran on every onLoad, and
roll mode loads at every event boundary, so the "logging suppressed" notice
was re-emitted once per cue: exactly the flooding it exists to prevent. It
also wiped the throttle for onLoad and onStop immediately before writing to
it. Reset now happens on stop only, outside the early returns that made the
first attempt at this a no-op.
Trigger reconciliation diffed a mount-time selection against a live prop.
Settings are polled, so a trigger created in another tab while the form was
open would be deleted by a save that never saw it. It now diffs against the
snapshot, and says which triggers a save will remove rather than removing
several same-lifecycle triggers silently.
Also: a rundowns template no longer carries a phantom empty rundown from
makeNewProject; the partial-duplicate endpoint returns the name it actually
used, since collisions get renamed; the template flow invalidates the project
list rather than relying on a refetch on mount; the last-fired label drops to
a one minute cadence instead of holding a 1Hz timer per automation forever;
e2e cleanup moved to afterEach so a mid-test failure stops leaking state.
The e2e spec has now been run against a real server, green on both the demo
project and a blank one, leaving no residue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LpbLJVVT26tzWkduck1M9H
Automations were already portable, contrary to the original framing: project
download carries them and the partial load already had an "Automation
Settings" toggle. What was missing is the other half of that loop. To share a
set of automations you had to hand over an entire show.
Save as template is the inverse of partial load: it writes a new project file
holding only the sections you pick. Automations, custom fields, URL presets
and view settings all become templates, and a template is an ordinary project
file, so it downloads, uploads and partial loads with no new format and no new
concepts.
createProjectWithPatch already builds exactly the right object, but it routes
through loadProject and would switch the running project. Saving a template
must not pull an operator out of the show they are running, so this writes the
file without loading it, the way duplicateProjectFile already does.
The automations panel gets the loop as a Share menu: save these automations as
a template, or go load one. The form says plainly that applying an automation
template replaces rather than merges, since triggers and automations are
coupled and safeMerge swaps the whole block, and that a template without
rundowns does not carry the events that point at its automations.
Adds the first e2e coverage automations have had.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LpbLJVVT26tzWkduck1M9H
* feat: create the first event from the cuesheet
* chore: cleanup css
* test: cuesheet beckground edit from empty state
* feat: only show +event button when user is in edit mode and have full write perms
* feat: update auto cue numbering
* feat: renumber from ui
* refactor: patchEntries is not used
* chore: format
* fix: correct cue at top of group
* fix: handle precision
* refactor dialog
* bump limit for performance time test
* extract type
* add class name to lable
* fix rebase
* refator: extract renumering logic
* chore: comments for getIntegerAndFraction function
* chore: add the for renumber mutation
* fix: fraction match precision
* refactor: small cleanup
* refactor: use more narrow validator
---------
Co-authored-by: alex-Arc <omnivox@LAPTOP-RC5SNBVV.localdomain>
* chore: only run release action if we have a tag
* chore: typescript 6 is out of beta
* chore: update flaky test
* chore: update pnpm
* chore: update playwright and node types
* chore: migrate tsup to tsdown
* chore: update node to node 22.22.2(LTS)
* chore: fix lockfile
---------
Co-authored-by: alex-Arc <omnivox@LAPTOP-RC5SNBVV.localdomain>
* chore: upgrade vite
* fix: inconsistentCjsInterop for ReactQR
* chore: e2e tests should use relativve path and get host from playwright config
* refactor: drop qr code dependency
---------
Co-authored-by: alex-Arc <omnivox@LAPTOP-RC5SNBVV.localdomain>
* chore: migrate eslint to oxlint
* chore: migrate prettier to oxfmt
* chore: migrate typescript
* chore: toThrow should have a expected value
* chore: cast test value as Day
* chore: small title fix
* chore: mocks should be hoisted
* chore: incorrect async useage
* chore: test should be inside description
* chore: test sohuld include an expeced
* chore: oxfmt
---------
Co-authored-by: alex-Arc <omnivox@LAPTOP-RC5SNBVV.localdomain>
* chore: remove old comment
* chore: smal lclean up of a e2e test
* chore: bump to beta.6
* chore: cleanup imports
* fix integration values com in ms
* allow linkStart and timeStrategy from API
* remove local mac dist
* feat: add group start time to state
* refactor: calculate expected times when offset mode changes
* feat: show relative data in ui
* fixup! feat: add group start time to state
* fixup! refactor: calculate expected times when offset mode changes
* fixup! feat: show relative data in ui
* try to handle multiday
* show planed/expected rundown end day offset values
* refactor: style tweaks to timers
* refactor: cleanup data use
* day offset
* update tests
* test getExpectedStart multiday
* write start epoch to restore file
* current day in relative mode
* remove todo
* move find day offset to utils
---------
Co-authored-by: arc-alex <ac@omnivox.dk>
* refactor: align header columns
* refactor: improve scrollbar visibility
* refactor: center align table elements
* refactor: make param elements stateful
* fix: issue with collapsed elements not loosing value
* fix: prevent search params containing multiple alias references
* fix: the issue where a file disappears if it is both migrated and recovered in the same load operation (#1744)
* refactor: disable group action for elements in groups
* refactor: move context menu items into the event element (#1747)
* feat: sheet import new features for v4 (#1730)
* import milestone
* fixup! import milestone
* test: milestone import
* add entries to group
stop on new group or on group-end type
* fixup! add entries to group
* cleanup
* add event target duration
* link start if undefined
* add skip import type
* extract some to the excel paresing functions
* tweaks to presentation
* move file
---------
Co-authored-by: Carlos Valente <carlosvalente@pm.me>
* fix: notify runtimeStore of events bieng groupd
* fix: improve authentication and stage detection in demo
* chore: ship logo with project
* fix: client is referenced by name
* fix: prevent reflow in event editor
* fix: stale render on selected event due to ref mismatch
* Create/Load/Delete multiple rundowns (#1696)
* refactor: restore last loaded rundown
* refactor: initialise rundown in ProjectService
* feat: allow switching rundowns
ensure on coordination between the db object and the working object
server provide list of rundowns
implement switch in the UI
implement delete
implement new rundown button
* fix: render order for floating button
* refactor: appropriate names to service
* refactor: rundown endpoints
* refactor: save last loaded rundown ID
* refactor: rundown management UI
* refactor: emit refetch all on project load
---------
Co-authored-by: Carlos Valente <carlosvalente@pm.me>
* feat: recover single event subscription
* fixup! feat: sheet import new features for v4 (#1730)
* fix: prevent dropping a group inside another
* fixup! refactor: move context menu items into the event element (#1747)
* fix: prevent stale references to custom fields
* fix: propagate updates to all rundowns
* refactor: client rundown metadata (#1728)
* generate metadata in the hook
* move test
* ensure there is always a last element
* use for-loop
* update metadata in useEfect
* fully extract metadata generation
* use direct assignment
* cleanup
---------
Co-authored-by: Carlos Valente <carlosvalente@pm.me>
* refactor: small imporvement and tests for coerce functions (#1752)
* refactor: small imporvement and tests for coerce functions
add test `coerceString`
add test `coerceBoolean`
add test `coerceColour`
* remove old todo
* fix: consistent quick add behaviour
* refactor: create flat rundown with metadata
* fix: show add buttons on top
* feat: allow editing milestones
* refactor: style tweaks to rundown elements
refactor: milestones are full width
refactor: cuesheet header alignment
fix: editor styling in cuesheet
* refactor: virtualise table
* refactor: improve overscan (#1758)
* bump version to 4.0.0-alpha.5
---------
Co-authored-by: Alex Christoffer Rasmussen <ac@omnivox.dk>
fix: close modal with button
refactor: small type improvements
refactor: migrate time inputs
refactor: migrate tooltips
refactor: prevent component resizing
Claude
Carlos Valente
Alex Christoffer Rasmussen
Carlos Valente